Application

It is suitable for TIG welders(not included). At the same time, it can also be used with AC / DC argon arc welders, CO2 welders, resistance welders, and other plasma devices.

Specifications

Model: WRC-300A

Material: Polygraphite, 304 Stainless Steel, Eco-friendly Copper, R57 Copper, Sheet Metal, Plastic, PPS         

Color: Blue

Style: Modern                                  

Mount Type: Free Standing

Assembly Required: Yes

Pump Power: 370W

Supply Voltage: 110V / 60Hz

Phase Number: Single Phase

Heat Dissipation: 1.5 KW (1 L/35.19 oz/min)

Pump Head: 30-35m/98.42-114.82ft

Pump Power: 370W

Flow Rate: 8L/270.54oz/min

Maximum Pressure / Stroke: 0.35 MPA / 50 Hz

Water Tank Capacity: 8L/ 270.51 oz

Operating Temperature: -20 ° C ~ 60 ° C/-4℉~140℉

Power Source: Corded Electric

Power Cord Length: 3.5m/11.48ft

Each Water Pipe Length: 1.5m/4.9ft

Product Size:45.6*25.3*32.8cm/17.95*9.96*12.91inch

Package Included

1* Welding Water Cooler

2* Water Pipes

2* Snaps

2* Quick Plug Connectors

1* English Manual

Notes

• Before use, please check all components for proper functioning to ensure safe operation.
• Please note that it is recommended to use purified water to prevent scale formation.
• Please pay attention to potential safety hazards when using electricity. The use of tools requires special operation qualifications. Please read the manual carefully before use, and pay attention to the safety tips inside.
• Please note that to ensure the life and performance of the tank, deposits inside the tank should be avoided. You need to clean it regularly or use high-efficiency filters or sediment traps (both not included) to clean it.
• Please note that the water tank should not withstand excessive water flow pressure and should be used by the working load and maximum flow rate of the equipment.
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.