Description
Keep your engine running clean and protected with this high-performance Boat Fuel Filter Element replacement cartridge. Designed for marine use, this fuel water separator filter effectively removes contaminants and water from fuel, helping extend engine life and improve performance.
Built with a durable aluminium housing and premium filter media, it delivers reliable filtration even in harsh marine environments. Ideal for boats, outboards, and other petrol engines.
Features
-
10 Micron Filtration – Over 90% filtration efficiency for cleaner fuel
-
Water Separation up to 99% – Effectively removes free water
-
Anti-Rust Construction – Corrosion-resistant for marine conditions
-
Durable & Long-Lasting – Built for reliable performance
-
Engine Protection – Helps prevent damage to internal engine components
Specifications
|
Model: S3213
|
|
Filtration: 10 Micron
|
|
Size: Diameter 94mm, Height 107mm
|
|
Material: Aluminium + Filter Paper
|
|
Replacement Part No.: MERC 35-60494-1
|
| Package Size: 20cm × 11cm × 10cm(2-piece pack) |
To Drain Water:
Draining of water or replacement of element is determined by contamination level of fuel. Inspect the collection bowl for water daily and service as necessary. Replace element at least once a year or when a decrease of power is noticed.
1. Loosen self-venting drain plug to drain water from bowl into a container.
2. Tighten drain.
3. Use primer bulb to fill filter with fuel.
4. Start engine and check ensure there are no leaks.
Draining of water or replacement of element is determined by contamination level of fuel. Inspect the collection bowl for water daily and service as necessary. Replace element at least once a year or when a decrease of power is noticed.
1. Loosen self-venting drain plug to drain water from bowl into a container.
2. Tighten drain.
3. Use primer bulb to fill filter with fuel.
4. Start engine and check ensure there are no leaks.
To Replace Element:
1. Loosen self-venting drain plug and drain the element into a container.
2. Remove filter element from mounting bracket with bowl connected.
3. Remove bowl from filter element and clean o-ring gland on bowl. BOWL IS REUSABLE * DO NOT DISCARD.
4. Lubricate o-ring with oil or grease and install on bowl.
5. Install bowl onto new element, tighten by hand.
6. Lubricate filter top seal with oil or grease.
7. Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand.
8. Start engine and check to ensure there are no leaks.
1. Loosen self-venting drain plug and drain the element into a container.
2. Remove filter element from mounting bracket with bowl connected.
3. Remove bowl from filter element and clean o-ring gland on bowl. BOWL IS REUSABLE * DO NOT DISCARD.
4. Lubricate o-ring with oil or grease and install on bowl.
5. Install bowl onto new element, tighten by hand.
6. Lubricate filter top seal with oil or grease.
7. Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand.
8. Start engine and check to ensure there are no leaks.
Package Includes
| Item Description: | Quantity: |
| Boat Fuel Filter Elements | x 2 |
| Seal Ring | x 1 |