5V 12V 24V 1-2-4-6-8 Channel Relay High Low Level Optocoupler Module PI

The relay module is a switch. It supplies power to the module, inputs the corresponding high/low level control signal, and the relay is closed, and the COM and ON ends are connected. It controls the on-off of other circuits, not the output voltage. It is a switch. It is generally used for weak current to control strong current.

Use tips:Note that the negative pole of the control signal should be connected with the negative pole of the module power supply. During the test, the negative pole of the power supply can be regarded as a low level signal, and the positive pole of the power supply can be regarded as a high level signal.

Module interface:
1. DC+: positive power supply (VCC)
2. DC-: negative power supply (GND)
3. IN: can be high or low level control relay

Relay outputs:
1. NO: normally open relay interface
2. COM: Common Interface Relays
3. NC: normally closed relay interface

High and low level trigger options:
low level trigger when jumper connects to LOW pin
high level trigger when jumper connects to HIGH pin

Datacaciques