CP Electronics EBDHS-MB-DD — Technical Data
General
- Model: EBDHS-MB-DD
- Type: High-bay PIR presence detector
- Mounting: Batten/luminaire mounted
- Control protocol: DALI / DSI dimming
- Application: Industrial and warehouse lighting
Electrical
- Supply voltage: 230 V AC ±10%
- Frequency: 50 Hz
- Power consumption: approx. 0.25 W
- Maximum load current: 2 A
- Maximum connected DALI/DSI drivers: 10
Detection
- Sensor type: Passive Infrared (PIR)
- Detection angle: 360°
- Maximum detection diameter: approx. 40 m
- Typical mounting height: 15 m
- Maximum mounting height: up to 20 m
- Adjustable detection masking included
Environmental
- IP rating: IP65
- Impact protection: IK05
- Operating temperature: approx. −10 °C to +35 °C
- Humidity: 5–95% non-condensing
- Insulation class: Class II
Physical
- Dimensions: approx. 172 × 88 × 74 mm
- Weight: approx. 150–200 g
- Pre-wired cable: approx. 1 m
- Mounting interface: M20 entry compatible
Functions
- Presence detection
- Absence detection
- Lux/daylight sensing
- Daylight harvesting
- Step dimming
- Scene recall
- Burn-in mode
- Programmable via IR remote handsets (UHS5, UNLCDHS)
Typical Uses
- LED high-bay luminaires
- Industrial battens
- Warehouses
- Factory halls
- Commercial buildings