eBay

STBUS

Front & Rear Seal Wear Sleeve Installer For Detroit Diesel Series 60 12.7L New

DESCRIPTION

Application：

For use on Detroit Diesel Series 60 and two cycle 92.
Use on seal # 23516969 23513578 23513485 23518355

Specifications:
Type:Crank Seal Installer
Condition: Brand New
Fitment Type: Direct Replacement
Material:Steel

Features:
*Strong compatibility: Works on the Detroit diesel series 60 and two cycle 92 engines
*High quality material: high quality wear-resistant steel structure, black oxidized surface treatment, durable, anti-corrosion and anti-rust. High precision and hardness for longer service life.
*Upgrade design - The tool is easier to use due to the simpler design, and each part is manufactured to the OE# specifications.
*Function: Used to install the front and back crankshaft wear sleeve and seals, eliminate the lip spot of the wear sleeve, the seal is installed correctly, without any leakage, saving you a lot of trouble in the work
Prevent leakage of seals.
Direct the J - 35686 - b and J - 35686 - a, is widely used in a variety of sealing and wear components, including 5, 23516969235357, 8235348, 5235835.
*Easier work - for installing front and rear crankshaft wear sleeves and seals. It eliminates the lip flame on the wear sleeve and properly installs the seal without leakage.

Installation:

1. Seal the outer diameter of the rubber with clean oil. Lubricate gearbox cover or flywheel housing holes with clean oil.
2. Install two guide studs (J-35686-1) through the holes provided in the center guide assembly (J-35686-1) and into the two threaded holes of the crankshaft at 180 degrees. Tighten the guide stud. The base must be tight against the end of the crankshaft.
3. Install the gasket on the center screw of the base.
4. Slide the oil seal assembly over the mounting base as close to the crankshaft hub as possible. Slip the collar so that the side with the step touches the seal. Slide the mounting cup onto the guide stud and mounting base.
5. Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing so that one side of the housing faces the mounting cup and install the hexagon nut on the center screw of the base.
6. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gearbox cover.
7. When the inner surface of the housing is firmly against the base and gasket, the seal and sleeve are installed correctly. The tool should be removed

OTHER ITEMS YOU MIGHT ALSO LIKE

hipping$Delivery

Shipping Detail	Shipping Company	Estimated Delivery time
US domestic shipping	Fedex Ground	Around 2-5 business days
US domestic shipping	UPS Ground	Around 2-5 business days
Turbo Gasket	USPS	Around 5-7 business days
International shipping	Fedex, DHL, TNT, EMS	Around 5-9 business days

The shipping cost of this listing is for 48 states in US, not included Alaska, Hawaii, Puerto Rico.All items will be dispatched within 24 hours as the payment cleared (Monday-Friday only). Our carrier collects all the parcels at 6am PST in the morning, any payment paid after 5:30am PST will be shipped next day at 6am PST. For example, you paid at 11am on Nov. 1st, we will ship your order at 6am on Nov. 2nd. The same rule applies to UPS 2nd Day Air Service. For example: The payment cleared at 11am on Nov.1st, the order will be shipped out at 6am on Nov. 2nd, and then you will get the parcel on Nov. 3rd. If our estimated delivery time and eBay's are contradictory, please refer to the standard delivery time of ours.

◆ All shipment will be arranged within 24 hours only with cleared payment.

◆ We ship to confirmed address only.

◆ The shipping cost is not refundable under any circumstances.

◆ Shipping time usually takes 3-5 business days to lower 48 states, and 5-10 business days to international addresses.

◆ Please only sign up the package after you opened it and confirmed no shipping damages. For shipping damage case,

please file it to the shipping company and get us the case number to ask for compensation for you.

◆Notice for International BuyersCustoms duties, taxes are not included in the item price or shipping cost. These chargers are buyers’ responsibility because they are normally collected by the delivery, freight, or shipping company.

eturn policy

We committed to provide good quality products to all our customers. We accept return or exchange within 30 days. No hassle for refund, 30 business days money back guarantee after we received the returned items. We hope that you will be pleased with your purchase. We want you to be 100% happy with the products you got. Your 100% satisfaction is our top priority.

If you are not satisfied with your purchase, please contact us by eBay messages within 30 days after you received the item. We will issue you an authorization number for return and help you out.

Any products that has been used are subject to restocking fee. The restocking fee percentage will depend on the condition of the returned products. The defective products are eligible for free exchange and no restocking fee will be applied.

All returned items must be in original condition with original tags and packaging. The reason for return:

1. Item Quality problem:

1). Buyer need to provide pictures or videos to show the problem.

2). Please allow us to have 2-3 weeks processing time to issue the exchange or refund. Our mechanic will inspect every return item. After the inspection, if it is the manufacture defective problem, you will get the exchange or refund within 24 hours.

3). If you are not satisfied with our products, please contact us first, before you leave any comments. We are dedicated to assuring that you will get top quality products and service.

2. Buyer purchased the wrong item or Buyer does not want the item:

1). Shipping and handling fee is not refundable.

2). Buyer must contact the sale representative within 14 days after the item arrived.

3). Return item must be in brand new and unused condition with original tags and packaging. Any product that has been used does not qualify for a return or exchange. And the depreciation fee will be charged (15% of item Value at least) for any product that have been used.

3. Shipping damage:

We use FedEx / UPS Ground / USPS for US local address orders, Parcelforce / Royal Message / FedEx / DHL / DPD top service shipping company for international orders. Please check the package when it arrives. Please Do NOT sign for any damaged package. It is your responsibility to sign the delivery in person and inspect the package before you sign anything. If you noticed the package is broken, please ask the delivery man to file the shipping damage claim immediately. Also please give us your shipping damage case number, we will help you to get the compensation from shipping company as soon as possible.

4. We shipped the wrong item

1). Return items must be in original condition.

2). Buyer must contact the sale representative within 7 days after the item arrived.

3). We would be under the responsibility to issue you full refund or send you a new product, once the return item is received.