Dental Vacuum Molding Forming Machine Former Heat Thermoforming Lab Equipment

 

Dental Vacuum Molding Forming Machine Former Heat Thermoforming Lab Equipment

Application

It is suitable for a wide range of materials and many clinical applications, and is compatible with almost all dental thermoplastics, making it an indispensable tool for any dental practice. It can be used for the molding and production of decolorized braces, orthodontic retainers, arch splints and plywood, fluoride trays, temporary or permanent abutments, and mouth guards.

 

Instructions for Use and Operation

1. Turn on the power and check whether the operating levers/buttons of the molding machine are normal.

2. Turn the upper cover(right or left) by 90°, place the required diaphragm(not included) between the upper and lower frames, and pull down the ball puller to clamp it.

3. Reset the top cover and twist the lifting handle to raise the set frame to the working height(limit lever on the upper part of the spindle).

4. Place the packaged product(not included) in the center on the mesh board.

5. Switch on the heating switch and heat the diaphragm(not included), when the diaphragm is heated to 0.39in below the plane of the lower frame(about two or three minutes).

6. Turn off the heating switch, twist the lifting handle, lower the set frame, turn on the vacuum motor at the same time, and then remove it when the package is shaped.

 

Specification

Color: Blue

Material: Aluminum, Stainless Steel

Process: Painting

Plug Type: US Standard

Voltage: 110V, 60Hz ±10%

Power: 1000W              

Heating Power: 600W

Molding Power: 800W

Power Cord Length: 1.2-1.5m/3.94-4.92ft

Molding Size: 110*110mm/4.33*4.33in

Product Size: 25*21*30cm/9.84*8.27*11.81in

Package Size: 30*25*21cm/11.81*9.84*8.27in

Gross Weight: 6kg/13.28 lbs

Net Weight: 6kg/13.28 lbs

 

 

Package Included

1* Forming Machine

 

Notes

  • Please note that this product does not include diaphragms.
  • Please note that after using the machine, do not forget to turn off the heating switch, otherwise, it may burn out the heater.
  • Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

 

 
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
 
2-9 working days to: USA
 
    •  
    • We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
  •  
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
PushAuction

On May 12, 2026 at 01:44:07 PDT, seller added the following information:

Datacaciques