Spark 200A 3S-20S Aluminum PCB Board for Electric Skateboard /Ebike/9377
Aluminum pcb Features: MOS fets: use 10x10 large package MOS , with better overcurrent and heat dissipation performance
Control mode: lock key control switch mode; press the lock button to lock it to open, and the LED light light up at the same time, press the lock button again to bounce it to turn off, and the LED light turn off at the same time.
The function of the product: the aluminum substrate fire-proof spark switch efficiently and safely protects the power contacts from being burnt and oxidized by the electric spark, effectively protecting the electronic components of the integrated circuit from breakdown and damage, preventing the occurrence of electric that may cause an explosion, and more effectively extending the electronics Product life.
Aluminum base plate has better heat dissipation performance. It is more convenient to add a larger heat sink for continuous large current output. The heat sink and the heat sink are connected with thermally conductive silicone grease, which has a better heat conduction effect.
Due to different batches,the appearance,color and printed words of the product , which not affect the use
Maximum current:200A (maximum current 200A requires enlarging the heat sink)
Continuous current:80A (with factory housing) LED button diameter:12mm
Voltage:12-90V (3S-20S)
current (Less than10MS):1000A (theoretical value)
Warnings:
Do not peel off the heat shrink.There's no to lock the heatsink and PCBA,Only the heat-transfer silicon pad is naturally sticky to heatsink and PCBA.
No short circuit protection,DO NOT short circuit output!
No reverse polarity protection. DO NOT plug in backwards
Recommended to keep output capacitance under 6,000 .Proper operation cannot be guaranteed at higher capacitances
Do not Hot-Swap.Try to make sure
Control mode: lock key control switch mode; press the lock button to lock it to open, and the LED light light up at the same time, press the lock button again to bounce it to turn off, and the LED light turn off at the same time.
The function of the product: the aluminum substrate fire-proof spark switch efficiently and safely protects the power contacts from being burnt and oxidized by the electric spark, effectively protecting the electronic components of the integrated circuit from breakdown and damage, preventing the occurrence of electric that may cause an explosion, and more effectively extending the electronics Product life.
Aluminum base plate has better heat dissipation performance. It is more convenient to add a larger heat sink for continuous large current output. The heat sink and the heat sink are connected with thermally conductive silicone grease, which has a better heat conduction effect.
Due to different batches,the appearance,color and printed words of the product , which not affect the use
Maximum current:200A (maximum current 200A requires enlarging the heat sink)
Continuous current:80A (with factory housing) LED button diameter:12mm
Voltage:12-90V (3S-20S)
current (Less than10MS):1000A (theoretical value)
Warnings:
Do not peel off the heat shrink.There's no to lock the heatsink and PCBA,Only the heat-transfer silicon pad is naturally sticky to heatsink and PCBA.
No short circuit protection,DO NOT short circuit output!
No reverse polarity protection. DO NOT plug in backwards
Recommended to keep output capacitance under 6,000 .Proper operation cannot be guaranteed at higher capacitances
Do not Hot-Swap.Try to make sure
