Graduated Dropper Pipettes Kit, 2pcs 20ml Pipette with Rubber Cap, Clear
Graduated Dropper Pipettes include pipettes and the rubber squeeze bulb used together. Its main use is to transfer liquids, such as essential oils, acids, solvents, etc. It is widely used in labs, teaching experiments, microbiology, etc. Its material is borosilicate glass with clear scale lines, which is very practical.
Specification
Pipette Capacity: 20ml
Pipette Diameter:12mm/0.47 Inch
Pipette Length: 410mm/16.1 Inch
Minimum Division Scale: 0.1ml
Material: Borosilicate Glass, Rubber
Color: Clear
Package List: 2 x Dropper Pipettes, 2 x Rubber Caps
Advantage
It is made of borosilicate glass, which is thick and durable so that it can be used repeatedly. Moreover, the borosilicate glass material has high temperature and corrosion resistance.
There are clear and readable scale lines on the surface of the pipette, allowing you to measure the volume of the liquid precisely.
The bulb in the kit is rubber, so it is strong and resistant, has strong suction, and can absorb liquids well.
Instruction
1. Clean the pipette and blot up the tip inside and outside with filter paper before use
2. Put the bulb sleeve into the mouth of the pipette and fix it.
3. Put the pipette into the liquid container, and squeeze the rubber bulb to absorb the solution.
4. After the suction, squeeze the rubber blub again to squeeze out the solution.
5. Remember to clean it at once after use.
NOTE
1. When using, the pipette should be vertically above. After absorbing the liquid, the pipette's mouth should not touch other objects.
2. After cleaning, place it in a ventilated place to dry.
3. When cleaning, handle with care to avoid collision and prevent breaking.
Specification
Pipette Capacity: 20ml
Pipette Diameter:12mm/0.47 Inch
Pipette Length: 410mm/16.1 Inch
Minimum Division Scale: 0.1ml
Material: Borosilicate Glass, Rubber
Color: Clear
Package List: 2 x Dropper Pipettes, 2 x Rubber Caps
Advantage
It is made of borosilicate glass, which is thick and durable so that it can be used repeatedly. Moreover, the borosilicate glass material has high temperature and corrosion resistance.
There are clear and readable scale lines on the surface of the pipette, allowing you to measure the volume of the liquid precisely.
The bulb in the kit is rubber, so it is strong and resistant, has strong suction, and can absorb liquids well.
Instruction
1. Clean the pipette and blot up the tip inside and outside with filter paper before use
2. Put the bulb sleeve into the mouth of the pipette and fix it.
3. Put the pipette into the liquid container, and squeeze the rubber bulb to absorb the solution.
4. After the suction, squeeze the rubber blub again to squeeze out the solution.
5. Remember to clean it at once after use.
NOTE
1. When using, the pipette should be vertically above. After absorbing the liquid, the pipette's mouth should not touch other objects.
2. After cleaning, place it in a ventilated place to dry.
3. When cleaning, handle with care to avoid collision and prevent breaking.
Hot Item
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- Our US warehouse allows us to ship you the best products quickly and accurately. We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Graduated Dropper Pipettes Kit, 2pcs 20ml Pipette with Rubber Cap, Clear
Graduated Dropper Pipettes include pipettes and the rubber squeeze bulb used together. Its main use is to transfer liquids, such as essential oils, acids, solvents, etc. It is widely used in labs, teaching experiments, microbiology, etc. Its material is borosilicate glass with clear scale lines, which is very practical.
Specification
Pipette Capacity: 20ml
Pipette Diameter:12mm/0.47 Inch
Pipette Length: 410mm/16.1 Inch
Minimum Division Scale: 0.1ml
Material: Borosilicate Glass, Rubber
Color: Clear
Package List: 2 x Dropper Pipettes, 2 x Rubber Caps
Advantage
It is made of borosilicate glass, which is thick and durable so that it can be used repeatedly. Moreover, the borosilicate glass material has high temperature and corrosion resistance.
There are clear and readable scale lines on the surface of the pipette, allowing you to measure the volume of the liquid precisely.
The bulb in the kit is rubber, so it is strong and resistant, has strong suction, and can absorb liquids well.
Instruction
1. Clean the pipette and blot up the tip inside and outside with filter paper before use
2. Put the bulb sleeve into the mouth of the pipette and fix it.
3. Put the pipette into the liquid container, and squeeze the rubber bulb to absorb the solution.
4. After the suction, squeeze the rubber blub again to squeeze out the solution.
5. Remember to clean it at once after use.
NOTE
1. When using, the pipette should be vertically above. After absorbing the liquid, the pipette's mouth should not touch other objects.
2. After cleaning, place it in a ventilated place to dry.
3. When cleaning, handle with care to avoid collision and prevent breaking.
Specification
Pipette Capacity: 20ml
Pipette Diameter:12mm/0.47 Inch
Pipette Length: 410mm/16.1 Inch
Minimum Division Scale: 0.1ml
Material: Borosilicate Glass, Rubber
Color: Clear
Package List: 2 x Dropper Pipettes, 2 x Rubber Caps
Advantage
It is made of borosilicate glass, which is thick and durable so that it can be used repeatedly. Moreover, the borosilicate glass material has high temperature and corrosion resistance.
There are clear and readable scale lines on the surface of the pipette, allowing you to measure the volume of the liquid precisely.
The bulb in the kit is rubber, so it is strong and resistant, has strong suction, and can absorb liquids well.
Instruction
1. Clean the pipette and blot up the tip inside and outside with filter paper before use
2. Put the bulb sleeve into the mouth of the pipette and fix it.
3. Put the pipette into the liquid container, and squeeze the rubber bulb to absorb the solution.
4. After the suction, squeeze the rubber blub again to squeeze out the solution.
5. Remember to clean it at once after use.
NOTE
1. When using, the pipette should be vertically above. After absorbing the liquid, the pipette's mouth should not touch other objects.
2. After cleaning, place it in a ventilated place to dry.
3. When cleaning, handle with care to avoid collision and prevent breaking.
Hot Item
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- Our US warehouse allows us to ship you the best products quickly and accurately. We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.