Key Features

Efficient Work: The machine has a high success rate of casting, and even ordinary tooth boxes can be injection molded, which greatly improves the working efficiency and flexibility of use. It produces dentures without any waste edges, and the grinding process can be completed in one go.

Adjustable Design: You can freely adjust the temperature (539.6-550.4℉) and pressurization time (7 minutes 30 seconds - 11 minutes) to meet specific injection needs according to different materials and sizes.

Practical Tools: This product consists of a heater and a heat press machine. The heater can melt the flexible denture material in the cartridge, and the hot press can inject the molten material into the pre-prepared flask (not included), which is an important equipment for invisible denture processing and manufacturing, and can be used to make flexible removable partial dentures.  

Easy to Operate: The intuitive display interface, sensitive buttons, and knobs, as well as the detailed instruction manual help you quickly master the operation method.

Safe and Reliable: It is equipped with automatic temperature control, automatic heat preservation, and a sound prompt function. The back of the machine is designed with multiple cooling holes to quickly dissipate the heat generated during work. It also has power insurance protection, which effectively protects the operational safety and normal operation of the equipment.

Details

Extension Rods: They are ergonomic and comfortable to hold, facilitating you to finish the die-casting work more easily.

Stable Feet: They make sure the machine is placed smoothly, greatly improving the safety of use.

 Application

It can be used to make flexible, removable partial dentures for dentistry, clinics, hospitals, factories, and so on.

Specifications

Mount Type: Desktop
Assembly Required: Yes
Material: Cast Iron
Style: Modern
Color: Gray, Silver, Black
Voltage: AC 110V/60Hz
Power: 350W
Power Source: Corded Electricity
Plug Type: US Standard
Heating Temperature: 282-288°C/539.6-550.4°F
Pressurization Time: 7 Min 30 Sec - 11 Min
Heat Press Machine Bottom Bracket Size: 19.5*9.5*19.5cm/7.68*3.74*7.68in
Overall Heat Press Machine Size (L*H): 46*52cm/18.11*20.47in
Heating Main Part Size: 16*12*13cm/6.3*4.72*5.12in
Heater Size: 24*18.2*27.5cm/9.45*7.17*10.83in
Package Size: 56*39*31cm/22.05*15.35*12.20in
Gross Weight: 27.65kg/60.96lbs
Net Weight: 26.51kg/58.44lbs

Package Included

1* Heater
1* Heat Press Machine
3* Extension Rods
1* Power Cord
1* English Manual
Other Accessories

 Notes

1. Please check the style and size before purchasing.
2. Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included.
3. The machine will keep heating up after being powered on until the set temperature is reached. It starts counting down when it reaches the set temperature, and the beep sounds when the countdown ends. The machine runs this program repeatedly in the power-on state and must be turned off after each use and turned on again when it is used again.
4. When the temperature is lower than the set temperature, the indicator light will be on, which means it is continuing to heat. When the temperature is constant, the indicator light turns off.
5. Due to the different altitudes and seasons, please set the heating temperature and holding time according to the actual situation. If the color of the finished product is too dark, please increase the setting temperature and holding time. If the color is too light, please lower the setting temperature and holding time.
6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.