KTQ-III Adjustable Film Applicator Coater Wet Film Coating Device 0-3500μm

The adjustable film applicator controls the gap, that is, the thickness of the final coating, by adjusting the two differentiators above the film applicator, and the lower blade can be adjusted up and down. During blade coating, the blade gap is adjusted in units of 10 microns, and the coating film ranges from 0 to 3500 μm.

Parameters

Effective scraping width: 50mm, 55mm,100mm, 150mm,200mm,250mm ,300mm

Accuracy: ±2μm

Division value: 10 μ m

Coating thickness: 0-3500 μ m

Use

1. The instrument is generally adjusted at the "0" position before use. If it is not at the "0" position, the instrument should be adjusted to "0" on the parallel plate. When adjusting "0", rotate the two differentiators so that the bottom end of the scraper and the The bottom surfaces of the side panels are on the same plane. At this time, the readings of the differentiator should be the same, and the "0" scale at the upper end of the differentiator should be aligned with the scale line at the lower end.

2. Rotate the differentiator and adjust the scraper to the required clearance, that is, the required coating thickness. Then hold both sides of the board by hand to scrape the sample plate to prepare the required coating.

3. After use, clean the instrument scraper with solvent and dry it, and put the instrument in the aluminum box.

Note: we won’t ship the item to PO Box ADDRESS.We only ship to the ENGLISH ADDRESS.Please leave us your ENGLSIH ADDRESS, your VALID PHONE NUMBER and ZIP CODE to make sure the smoothly delivery. We will declare your item  with TRUE value. If you need we write low price on shipping bill, please leave message when you make payment . However, imported duties, taxes and charges are not includes in the price. The buyer is responsible for all the duty and the local tax.