4mm Din 4 Viscosity Cup Dip Cup Aluminum DIN Immersion Paint
Viscosity Cup DIN 4
Introduction:
- Designed according to DIN53211 standard, it is usually suitable for testing thin liquids with relatively low viscosity; it is widely used in Europe. The viscosity dip cup is used for rapid measurement on site or in the production process.
- Such viscosity cups are often used in the printing or ink industry. Simply immerse the viscosity cup in the product to be tested, then lift it out, and measure the time it takes for the product to empty from the orifice. The measured kinematic viscosity is usually expressed in seconds required to flow out, which can be converted to centistokes (cSt).
Application:
- Used to determine the viscosity of inks, coatings, paints.It is opened by the bottom orifice, the refining capacity of 100ml of high-quality aluminum cup. Ford cup is to evaluate the viscosity of the material by measuring the time required by the flowing out of the hole in the bottom of a certain volume of the sample of the aluminum cup.
Parameters:
- Model No. : 4#
- Cup material: Aluminum
- Capacity: 100ml.
- Cup body width 55 mm, cup height 73 mm, total length 270 mm
- Mouth hole inner diameter: Φ4 ± 0.02mm
- Ideal measuring range: 96-683 cSt
- End of flow time (s): 20-110
- Weight: 202g