Mini Table Saw, Portable Chop Saw, cutting Machine with 7- speed Power Supply Angle and Height Adjustable Low Noise, for Soft metal, Thin Stainless Steel Sheet and Iron Sheet, Wood, Plastic, Acrylic,Bamboo
Product Parameters:
❖ Product size: 15*18*11cm (5.91*7.09*4.33inch)
❖ Net weight: 1.92kg (4.23lb)
❖ Voltage: 110v 60HZ
❖ Working voltage: DC12-24v
❖ Cutting thickness: 26-29mm
❖ Motor speed: 9000r/min
❖ Adjustable angle: 0-45°
Application range: can cut soft metal, wood, plastic, acrylic, bamboo material, handmade, etc...
Product Features:
1) Adjusting ruler
0--45 degrees, angle adjustment. Can meet your multi-angle cutting and polishing.
2) Powerful
The motor can use strong power for a long time and easily cut all kinds of soft materials.
3) Low noise
Working and running, the noise is around 80 minutes.
4) Regulator
The machine height adjustment button can effectively control the distance between the blade and the table.
Packing List:
☑ Cutting machine*1
☑ Multifunctional saw blade*1
Grinding wheel cutting saw blade *1
☑ Adapter (including plug) *1
Matters Needing Attention
1. Before use, please carefully check whether the cutting material is consistent with the type of saw blade selected; it is strictly forbidden to use the saw blade to cut the inconsistent material, so as to avoid damaging the saw blade
2. When installing, the matching error between the motor shaft and the saw blade center hole must be less than 0.1mm.
3. Note that the direction of the arrow marked on the saw blade must be consistent with the rotation direction of the table saw motor; the saw blade cannot be cut when it does not reach the normal speed
4. During the cutting operation, it is strictly forbidden to apply side pressure and curve cutting, and the blade must be stable to avoid impact on the blade to avoid danger.
5. Included saw blade
Grinding wheel cutting: can cut the material is small steel pipe, small steel plate, small square steel, stainless steel, small aluminum plate and so on
Multifunctional saw blade: can cut the material is wood, acrylic board, ABS board, electric board materials, etc., suitable for cutting thick materials
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
