Details
Why should install this Auto Start Stop Eliminator device?
1: Auto start stop will cause the air conditioner to not run smoothly.
2: Auto start stop will accelerate the aging of the spark plug.
3: The auto start stop process will have higher requirements for oil products.
4: Frequent start and stop will have a great impact on the battery, seriously shortening the battery's service life.
 
Properties:
The start-stop module has a memory mode to avoid the shortcomings of the start-stop functions.
-The use of smart chip, no delay, stable current, does not cause the current over the phenomenon of damage
Effectively prevent damage to engine, battery, spark plug, etc., caused by frequent start-up.
Plug and Play, easier to install. Professional installation is highly recommended!!!
 
Features:
★Fitment: Automatic stop start device is fit for Kodiaq Karoq. Please check the relevant information carefully, make sure this accessory fits you. ( If you are not sure this fitment, please feel free to contact with us before purchasing.)
★3 Modes Introduction:
a.Auto-off mode: Each time the car is started, the start-stop is automatically turned off. If it is turned on manually in the middle, it will still turn off after the car is turned off and locked.
b.Storage mode: manually switch the start-stop switch once, and the start-stop state will be saved and saved, and will not be affected by power failure.
c.Service mode (original factory mode): Start-stop treasure does not work by default, the effect is the same as the original car.
★Installation: Remove the central control panel of the car, and connect the cable to the socket according to the instructions of the installation picture. After installation, start the car immediately, and the button light will automatically turn red after 3-5 seconds.
★Note: If your car does not have "A OFF" button, it will not work.
Generally, it can be directly inserted for use. If it cannot be installed, professional installation is recommended.
 
Specifications:
Color: Black
Length: 15cm/5.91inch
Material: ABS Plastic
Rated Current: 12A
Function: Close the auto stop start engine Connect Cable
 
Installation steps:
Please check your car interior part if the same as our photo before ordering. If you have any questions, please contact us.
In general, the indicator lamp means OFF and the indicator lamp means ON.
Find the original auto plug switch interface, and the original auto start and stop switch button can be transferred.
 
Package included:
1x Auto Automatic Stop Start Engine System
1x removal tools included

Copyright©2017 DataCaciques

Details
Why should install this Auto Start Stop Eliminator device?
1: Auto start stop will cause the air conditioner to not run smoothly.
2: Auto start stop will accelerate the aging of the spark plug.
3: The auto start stop process will have higher requirements for oil products.
4: Frequent start and stop will have a great impact on the battery, seriously shortening the battery's service life.
 
Properties:
The start-stop module has a memory mode to avoid the shortcomings of the start-stop functions.
-The use of smart chip, no delay, stable current, does not cause the current over the phenomenon of damage
Effectively prevent damage to engine, battery, spark plug, etc., caused by frequent start-up.
Plug and Play, easier to install. Professional installation is highly recommended!!!
 
Features:
★Fitment: Automatic stop start device is fit for Kodiaq Karoq. Please check the relevant information carefully, make sure this accessory fits you. ( If you are not sure this fitment, please feel free to contact with us before purchasing.)
★3 Modes Introduction:
a.Auto-off mode: Each time the car is started, the start-stop is automatically turned off. If it is turned on manually in the middle, it will still turn off after the car is turned off and locked.
b.Storage mode: manually switch the start-stop switch once, and the start-stop state will be saved and saved, and will not be affected by power failure.
c.Service mode (original factory mode): Start-stop treasure does not work by default, the effect is the same as the original car.
★Installation: Remove the central control panel of the car, and connect the cable to the socket according to the instructions of the installation picture. After installation, start the car immediately, and the button light will automatically turn red after 3-5 seconds.
★Note: If your car does not have "A OFF" button, it will not work.
Generally, it can be directly inserted for use. If it cannot be installed, professional installation is recommended.
 
Specifications:
Color: Black
Length: 15cm/5.91inch
Material: ABS Plastic
Rated Current: 12A
Function: Close the auto stop start engine Connect Cable
 
Installation steps:
Please check your car interior part if the same as our photo before ordering. If you have any questions, please contact us.
In general, the indicator lamp means OFF and the indicator lamp means ON.
Find the original auto plug switch interface, and the original auto start and stop switch button can be transferred.
 
Package included:
1x Auto Automatic Stop Start Engine System
1x removal tools included

We will send the item to you from the warehouse near you;
We only ship to address that you left on the order, must confirm your Shipping address;
All the items will be shipping within 1-2 working days after receiving the payment, except some holidays;
When the shipping method is express delivery, the courier company may charge remote fees in some areas;

Return Policy
Returns are accepted within 30 or 60 days for US orders. Message us first for the quickest solution on how to receive a return label.

The following must be sent when you open a return:

A photo of the original part number needed.

Documentation that the part could not be programmed and verify installation requirements.

Items returned due to an incorrect part number may be subject to a return $10 fee.

Returns will be initiated within the next 1-2 business days of delivery. The item must be in its original condition and markings. Any damaged, missing, or incorrect items returned will be a loss in value and deducted from your refund. Additional photos and documentation may be required.

"PARTS ONLY" sales are FINAL. Refunds are not accepted.

Important item compatibility information

There may be some variations and more than one part can be fitted to vehicles mentioned in compatibility lists. Please check your old part and verify that its reference number and the reference numbers mentioned in the listing match before ordering.

If you do not have the part number, please send us the chassis number (also called VIN, Vehicle Identification Number) of your vehicle and we will check the compatibility for you. You can find the chassis number in your vehicles registration documents.