Application
This kit is suitable for round dial watches with diameters between 0.63-1.97 inches and rectangular watches measuring 0.79-1.77 inches.
How to Use
1. Turn the handle to raise the height of the screw, leaving enough space for placing the mold.
2. Place the front mold, the cleaning cloth, the watch (with the back of the watch facing up), and the back cover mold in order and adjust the balance of the front and back molds to make sure they have not shifted.
3. Slowly turn the rotating handle of the watch press tool to press the watch back cover.
Specification
Color: Silver
Style: Modern
Shape: Rectangular
Material: Iron, ABS
Assembly Required: Yes
Round Mold Size: 50-48mm/ 1.97-1.89in, 46-44mm/ 1.81-1.73in, 42-40mm/ 1.65-1.57in, 38-36mm/ 1.5-1.42in, 34-33mm/ 1.34-1.3in, 32-31mm/ 1.26-1.22in, 30-28mm/ 1.18-1.1in, 26-24mm/ 1.02-0.94in, 23-21mm/ 0.91-0.83in, 20-18mm/ 0.79-0.71in, 16mm/ 0.63in, 25-20mm/ 0.98-0.79in
Rectangular Mold Size: 45mm/ 1.77in, 40mm/ 1.57in, 35mm/ 1.38in, 30mm/ 1.18in, 25mm/ 0.98in, 20mm/ 0.79in
Base Size: 9.5*5.6*1.2 cm/ 3.74*2.2*0.47 in
Thread Diameter: 1cm/ 0.39in
Each Bracket Diameter: 1.2cm/ 0.47in
Gross Weight: 0.55kg/ 1.21 lbs
Net Weight: 0.5kg/ 1.1 lbs
Package Size: 15*11*6 cm/ 5.91*4.33*2.36in
Package Included
1* Watch Press Tool
12* Round Molds
6* Rectangular Molds
1* Cleaning Cloth
Notes
- Please note that this product is only suitable for watch back covers with pry holes, not for back covers with screws.
- Putting the cleaning cloth between the watch glass face and the mold when using it can effectively avoid scratching the watch glass.
- Please note that the size of the mold on the glass side must be as large as the edge size of the glass, larger or smaller will crush the glass. The back cover mold should be smaller than the back cover size.
- During the production process, there may be burrs left on the molds, which may interfere with maintaining the pressure balance. If you receive a mold with a similar condition, please don't be anxious, and you can easily remove it with a knife or other hard objects(not included).
- Please note that the watch and case must not be displaced during the process of closing the case back, otherwise, the case back will not be successfully closed and the watch may be damaged.
- Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
