Application

With an applicable area of about 53.82-161.46ft², it is suitable for a bedroom, living room, kitchen, dining room, corridor, aisle, balcony, study, reading room, living room, cafe, store, bar, office, lounge, library, club, hotel, kindergarten, and so on. It is not only suitable for indoor lighting but also can be used as a ceiling fan.

Specifications

Material: Iron, ABS

Process: High-temperature Baking Paint, Injection Molding, Water Transfer Printing

Style: Modern

Efficiency: E

Motor Type: Pure Copper Motor

Mounting Type: Ceiling Mount

Assembly Required: Yes

Color: White, Gold

Indoor/Outdoor Usage: Indoor

Control Method: ‎Remote(Included), Wall Switch(Not Included)   

Battery Type: 2* AAA Batteries(Included)

Light Color: White Light, Warm Light, Neutral Light

Light Source: LED(Included)

Color Temperature Range: 3000-6500K

Number of Fan Blades: 3

Wind Speed Gears: 6

Remote Control Distance: 3-8m/9.84-26.25ft

Timing: 1/2/4/8h    

Noise: 30dB

Applicable Area: 5-15m²/53.82-161.46ft²  

Light Power: 32W

Voltage: 95-120V

Motor Power: 22W

Base Diameter: 15cm/5.9inch

Overall Product Length: 121cm/48inch

Short Rod Length: 10cm/3.93in

Long Rod Length: 20cm/7.87in

Lampshade Diameter: 15cm/5.9in

Total Height of the Matching Short Rod: 38cm/14.96in

Total Height of the Matching Long Rod: 48cm/18.89in

Package Size: 69*23*22.5cm/27.17*9.06*8.86in

Gross Weight: 6.3kg/13.89lbs

Net Weight: 5.3kg/11.68lbs

Package Included

1* 48 Inch Ceiling Fan Light

1* Remote Control

1* English Manual

All Accessories for Assembly

Notes

• Please check the dimensions of the product before ordering to ensure it fits your home.
• Please do not install the light next to the air conditioner or heater to avoid rusting due to moisture, which will affect the service life of the light.
• Please wear electric insulation gloves (not included) and avoid scratching the surface of the lamp and the electric wire when installing. Please make sure that the power supply has been cut off before installation, and conduct a power test before installation. Please install it by a licensed electrician if necessary.  
• Please make sure that the roof and floor construction is completed and is free of leakage before the installation of the light.
• Please use the light within the applicable voltage range and clean the light regularly. Please cut off the power supply when you clean the light. Please wipe with a soft cloth, it is not suitable to clean with cleaning agents.
• Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.