For MJX 1/10 Hyper GO 10303 RC
Description:

100% Brand New

Name: Fender

Material: 3D Printed

Color: Black

Quantity: 4PCS/Set

Compatible Models: For MJX 1/10 Hyper GO 10303 RC

Features:

This product utilizes 3D printing technology with a black micro-matte finish.

Enhances overall vehicle realism while reducing dust impact on internal electronics for a cleaner cabin environment.

Precision craftsmanship with flawless styling.

Includes mounting screws for easy installation.

Contents:

One set of mudguards

For Mjx Hyper Go 1/14 14303 RC
Description:

100% brand new

Name: Fender

Material: 3D printing

Color: black

Quantity:4PCS/Set

Suitable for model:For Mjx Hyper Go 1/14 14303 RC

Features:

Mjx 1:14 Rally 14303 Citroen special fender, the product is petg printed.

The product comes with ABCD 4 pieces plus 2 pieces of mounting support connectors, AD is the front connecting support, the position marked with A on the support corresponds to the mounting of fender A. The position marked with D corresponds to the mounting of fender D. BC is the rear connecting support, the position marked with B corresponds to the mounting of fender B, and C corresponds to the mounting of fender C. The large screws are used to connect the support to the fender.

The large screw is used to connect the support to the shock mount. The small screws are used to attach the fenders to the ends of the supports.

Due to the proximity of the front support and the electronics. If there is any interference, please use the Allen wrench provided with the product to avoid interference.

Installation of this product effectively reduces dust from entering the frame.

Installation of this product. It can eliminate the need to install the original transparent dust cover. Reduce ESC overheating. The product has a certain degree of toughness. But not violent impact.

List:

1 set of fenders

Suitable for model:For MJX Hyper Go 1/14 14304 RC

DESCRIPTION:

100% brand new

Name: Fender

Material: PETG+Nylon

Color: Black

Quantity: 6PCS/set

Suitable for model:For MJX Hyper Go 1/14 14304 RC

Features:

Factory is a set of 6pcs, ABCD 4pcs fender plus AD and BC 2pcs support bar with letters.

1. AD is mounted behind the front shock mount and BC is mounted in front of the rear shock mount. Then the 4 pieces of ABCD are mounted on both ends of the support bar with corresponding letters and fixed with screws.

2. The product is made of petg or nylon, the petg material will have a layer of grain, nylon surface for the frosted effect at the same time nylon parts have better toughness.

3. The product is shipped with supporting installation tools, mainly for the front support bar installation position. Other mounting positions are relatively simple to install. 5. Due to the factory power switch may not be the same as the factory fixing, fender D parts may need to be installed back to adjust the position of the power switch. 6.

4. The product can reduce the dust into the inside of the frame, reduce the dust pollution of electronic equipment.

List:

1 set of fenders

For Hyper Go MJX 7303 1/7 RC

Description:

100% brand new

Name: Fender

Material: 3D printing

Color:black

Fitment:For Hyper Go MJX 7303 1/7 RC

Features:

1.MJX 7303 Citroen 1/7 Large Drift Rally Car Offroad C3 Flat Run Brushless RC Car Model Modified Special Fenders, petg material printing. Have better high temperature resistance.

2. Double bracket design is more solid and reliable.

3. Product installation, bracket A and B mounted on the front of the car to refer to the picture position, the length is 152mm accessories on the logo. Bracket C and D are installed at the back of the car, the length is 160mm, there is a logo on the accessories. After installing the fender, install the fender curved pieces, from the right front of the vehicle clockwise installation ABCD4 pieces with matching 2.5 × 10 screws can be fixed.

4. Installation of this product can reduce the degree of dust into the vehicle chassis. The product reserved fender film installation holes. Support later fender film installation.

List:

1 set of fenders

 For Hyper Go MJX 7304 1/7 RC Car
Description:

100% Brand New

Name: Fender

Material: PETG

Color: Black

Quantity: 4PCS/Set

Compatible Models: For Hyper Go MJX 7304 1/7 RC Car

Features:

1. This product is 3D printed using PETG material, capable of withstanding general drifting and dust accumulation. For extreme hill-climbing, please choose the TPU version.

2. Installation Method: Refer to Detail Image 2. Remove the original screws corresponding to the positions of the A/B/C crossbars. Install the three crossbars using the included 3x18 screws as shown in Detail Image 2. The crossbars are labeled A/B/C in the middle section; install them from front to rear.

3. Secure the letters on both sides of the crossbeam to the corresponding letters on the inner fender using 2.5x10 screws to complete installation.

4. Due to the large size of the vehicle body, slight deformation may occur in each fender. Some gaps may appear slightly larger in certain areas, which is unavoidable.

5. This product effectively reduces mud and stone ingress into the chassis during high-speed driving.

Contents:

1 set of fenders

 For MJX 1/10 Hyper GO 10306 RC

Description:

100% Brand New

Name: Fender

Material: 3D Printed

Color: Black

Compatible Models: For MJX 1/10 Hyper GO 10306 RC

Features:

Meijiaxin 10306 Front & Rear Tire Fenders, thick material, no steering interference, damage-free installation

Product printed with PETG. Simple installation

Installation Guide: 1. Attach brackets A/B/C/D clockwise from the front to the factory shock mounts using 3x10 screws. 2. Install fenders by aligning:    - Fender A with bracket A    - Fender B with bracket B    - Fender C with bracket C    - Fender D with bracket D    Secure with included 2x8 screws.    The wide-span bracket design provides enhanced support.

Contents:

1* Mudguard

For FMS 1/24 FCX24M Toyota Tacoma RC
Description:

100% Brand New

Name: Fender

Material: Resin

Color: Black

Quantity: 2PCS

Compatible Models: For FMS 1/24 FCX24M Toyota Tacoma RC

Features:

1. Made from black-gray high-toughness resin with a smooth, refined surface.

2. Simple installation: Remove original screws as indicated by the red markings in Product Detail Image 2, then secure with the included extended screws. Repeat for both sides. Note: The opposite side requires two fewer screws due to the switch placement.

3. Enhances vehicle realism in photos while reducing dust interference with underbody electronics.

4. Note: After installing the mudguards, slightly bend the vehicle body shell outward on both sides before reattaching it. The product includes reserved mounting holes for footrests.

Contents:

1 set of mudguards

For HPI venture 1/18 HILUX RC
Description:

100% brand new

Name: Fender

Material: resin

Color: black

Quantity: 4PCS/set

Model：For HPI venture 1/18 HILUX RC

Features:

HPI venture simulation 1/18 Toyota HILUx Hercules 4WD 2-speed electric RC off-road crawler fender, the product is printed in black high tough resin. The details are clear and smooth surface.

The product is a set of 4 pieces factory has been equipped with a good installation fixing screws.

Installation is simple, directly remove the original beam left and right sides of each of the 7 screws to the fender to the corresponding position of the reference details picture, with the fender with the screws to install and fix the installation is complete.

Products can increase the sense of realism while reducing the outdoor play car dirt thrown into the chassis, to a certain extent, reduce the dust on the car's electronic equipment pollution!

List:

1set of fenders