Features：

The centering for dial indicator is mainly used to determine the relative position of the outer circle and inner circle of the tool and the center of the spindle. Its indicating for surface faces the operator and is easy to read when its clamping drive shaft rotates.

① Find the center of the workpiece on the fixture on the boring machine or milling machine (centering).

② When the spindle rotates, the for dial always faces the operator so that the operator can center

③ Center the side diameter. Milling machine

④ Can operate at any angle from horizontal to vertical

Measuring range and scale: Measuring range: 0-3mm, scale is 0.01mm, which can achieve precise alignment.

Wide range of use: very suitable for center drilling and offset drilling on milling machines and drilling machines

Specifications:

Part name: coaxial centering indicator

Color: pink

Measuring range: 0-3mm

Division value: 0.01mm

Material: metal

Size: as shown

way

1. Centering hole: Select and install a suitable probe, tighten the probe with a tightening screw, insert the clamping drive shaft into the spindle and tighten it, and drive the probe into the hole. Before rotating the machine tool spindle, hold the handle with your hand, start the spindle, and move the workbench to adjust the size (the spindle does not exceed 100rpm).

2. External circle centering: Select and install a suitable bending measuring head, tighten the measuring head with a tightening screw, insert the clamping drive shaft into the spindle and tighten it, and drive the measuring head to the outer circle. Before rotating the machine tool spindle, hold the handle with your hand, start the spindle, and move the workbench to adjust the size (the spindle does not exceed 100rpm).

Package Contents:

1 x Centering Micrometer Test Indicator

9 x Accessory Tools

1 x English Manual

Note:

1. During , there should be no oil or dust on the joint between the transmission shaft and the main machine.

2. Before , clean the for surface of the friction disc with a soft cloth and avoid for impact.

3 After the , remove the handle and measuring head, clean the centering gauge and put it in the box

Payment must be completed within 5 days. If you have any problems about payment, please contact us via message.

We only ship to confirmed Order addresses. Please comfirm that your Order for ADDRESS is in line with your shipping for ADDRESS.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to US; about 10-30 working days to other countries.  for TRANSIT time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive is very important to us. If you have any questions, please feel to contact us via "Ask seller a question" . We will reply your email within 24 working hours.