Application:
For Rolls-Royce Ghost RR4 2008 - 2019
For Rolls-Royce Wraith RR5 2012 - 2019
For Rolls-Royce Dawn RR6 2015 - 2019
Air Suspension Structure:
Generation & Evolution:
Rolls-Royce Ghost
BMW L6 First generation ( 2009 – 2020)
Architecture of Luxury Second generation (2020–present)
Signs that your air suspension needs to be replaced include:
1.Abnormal Sounds
2.Poor Handling Stability
3.Air Leakage
4.Car Body Slant
5.Irregular Tire Wear
6.Over Bend
Note Before Installation:
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
Removal Guideline:
Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
1.Raise vehicle.
2.Remove left rear wheel.
3.Remove cover from control arm.
4.Disconnect ride height sensor arm
5.Gain access to top nuts and airline by removing rear speaker and foam inserts underneath. remove the air line.
6.Remove oe air line fitting from the air line and discard. use the figure below as an example.
7.Disconnect both electrical connectors.
8.Remove sway bar linkage.
9.Remove lower strut bolt.
10.Disconnect torsion bar from wheel carrier.
11.Loosen control arm at rear axle carrier. disconnect control arm at wheel carrier.
swing control arm down.
12. With assistance, remove the three (3) top nuts from the strut and remove from vehicle.
13.Removal complete.
Installation Guideline:
Installation is in reverse order of air strut removal.
OEM Part Number:
37106892845, 37106864531, 37106868823, 37106888033, 37106892859, 37106862551, 37106864533,
37106862189, 37106892863, 37106879965, 37106866213, 37106892855,
6892845, 6864531, 6868823, 6888033, 6892859, 6862551, 6864533, 6862189, 6892863, 6879965, 6866213, 6892855
37106892846, 37106864532, 37106868824, 37106888034, 37106892860, 37106862552, 37106864534,
37106862190, 37106892864, 37106879966, 37106866214, 37106892856,
6892846, 6864532, 6868824, 6888034, 6892860, 6862552, 6864534, 6862190, 6892864,6879966, 6866214, 6892856
Highlight:
1. 100% Air Tightiness testing
2. 24 hours air tightness test ≤0.02MPa
3. Anti-corrosion and provide a more consistent wear surface
4. Built to strict quality control standards
5. CNC Machined Components
6. Designed for Comfort Suspension
7. Direct replacement for OEM strut without modification
8. Easy to install
9. Eliminating abnormal sound
10. Gives the driver more control of ride
11. Good heat dissipation
12. It has a high compressive strength and good sound insulation to ensure our driving comfort and safety
13. Restore the original ride height and improve ride quality
14. Test more than 3 million times
15. Sturdy & Durable Material
Package Included:
Single for Front Left and Right Air Suspension Shock Strut
Note:
1.Please double confim the compatibility as well as the OEM number before purchasing.
2.Instruction is not included. Professional installation is recommended
3.Please feel free to contact us for whatever we can help via eBay message; every message will be replied in 12 hours.
