Wireless Remote Speed Controller 12V/24V/36V/48V with Timer, Scheduled Operation, and Cycle On/Off; LCD Display; 30A/60A

 Product Specifications

Input Voltage: DC 10–55 V (specific voltage must match the motor’s rated voltage)

Output Voltage: Linear under load

Peak Current: 60 A

Continuous Current: Within 40 A

Forward/Reverse: Supported

Wireless Remote Control: Yes

Timer Function: Yes

Limit Switch Function: Yes

Soft Start/Stop: Configurable Digital Display: 0–100%

Speed Control Type: Current Modulation

Speed Control Method: Momentary +/–

Speed Control Range: 0–100%

Control Frequency: 15 kHz

Wiring Type: Terminal Block

Supported Motors: Brushed Motors

Module Dimensions: L x W x H 148 mm x 95 mm x 36 mm

Net Weight: 255 g

Panel Cutout: L x W 142 mm x 88 mm

Mounting Method: Flush-mounted

Battery Type: CR2032

Backlight Control: Press and hold the MENU button to toggle the backlight on/off

Reverse Start: To start in reverse, press the FWD/REV button

⚠️ Important Notes

1. Input must be polarized (positive and negative).

2. The input voltage must match the motor’s rated voltage (within the 10–55V range).

3. Example: If the motor’s rated voltage is 12V, supply 12V to the speed controller; if the motor’s rated voltage is 36V, supply 36V to the speed controller.

4. Never apply 220V input, as this will destroy the device.