500W Dental Lab Wet Model Trimmer w/ Abrasive Disk Model Trimming Machine JT-19

 JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment 500W 110V

 

Features:

1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve

2. Connect the waste-disposal tube to the unit

3. Connect the power cord, and switch on the power switch (O=off, l=on)

4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)

5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)

 
Attention:

If there is some abnormal noise when working on

Possible reason：① Axon is loosing ② Disc is not plain enough。

How to solve it：①Dissemble the disc⒃ with spanner，make the snap

Ring tightly；② change the disc。

The machine does not work when power on

Possible reason：① fuse get burnt；② motor get burnt；③ switch get wrong。

How to solve it：① change the fuse（22） which inside the socket；② change the motor ③ change the switch

 
Specifications

Voltage: 110V/60Hz

Power: 500W

Rotational Speed: 2800 rpm

Dimensions: 44×35×35cm

Weight of the dental trimmer: 20kg

 

Content:

1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment



 
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
 
2-9 working days to: USA
 
    •  
    • We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
  •  
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
BrandJINTAI
MPNDoes Not Apply
Power500W
Rotational Speed2800 rpm
ModelWet Model Trimmer
UPCDoes not apply
PushAuction

Datacaciques