Specifications

Earbuds Model: EP-T25

Technology: BT 5, A2DP, AVRCP, HFP, HSP, AAC Driver: (each channel) 1 x 6mm / 0.24” speaker driver

Sensitivity: 90 ±3dB SPL (at 1kHz/1mW)

Frequency Range: 20Hz – 20kHz Impedance: 16 ohm ±15%

Microphone Type: MEMS (microphone chip) Microphone Sensitivity: -38dB ±1dB (at 1kHz) Microphone Frequency Range: 100Hz – 10kHz

Charging Time: 1 hour Battery Life Up to 5 hours Battery Type Li-polymer (2 x 40mAh)

Operating Range: 10m / 33ft IP Rating IPX5 Weight 7g / 0.25oz (pair)

Description

【25-Hour Playtime】 The earbuds stream Hi-Fi stereo sound for up to 5 hours on a single charge. There’s an extra 20 hours in the compact charging case that is quickly recharged with USB-C.

【Powerful Bass Performance】The enhanced 6mm dynamic drivers deliver high-fidelity sound, clearer than CD-quality with richer bass.

【Package Contents】 True Wireless Earbuds*1, Charging Case*1, Ear-Tips (S/M/L), USB-C Cable*1, User Manual*1, Quick Start Guide*1

The tiny earbuds deliver surprisingly accurate sound to immerse you in your music. Improved calls clarity in busy or windy places.

Triple-tap either earbud to access your phone's assistant.A responsive, touch-sensitive panel on each earbud allows easy music control and calls management. The super compact charging case keeps your earbuds safe and packs 4 additional charges.

Turning On / Off

Turn On Open the lid of the charging case or touch and hold the touch-sensitive panels on both earbuds for 4 seconds when they are turned of

Turn Off Close the lid of the charging case or touch and hold the touch-sensitive panels on both earbuds for 6 seconds when they are turned on

Pairing

Starting with the earbuds in the case:

Open the lid of the charging case. Both earbuds will turn on automatically and connect with each other

Turn on the pairing function on the device you want to pair with the earbuds

From the list of available devices, find and select “EP-T25” If a code or PIN is required for pairing, enter “0000”

Regular Use After Pairing Once the earbuds are successfully paired with your device, they can be switched on and off as follows:

• Open the lid of the charging case, then both earbuds will turn on and
• connect with each other automatically
• To power off, put the earbuds back in the charging case and close the lid,
• and they will begin charging.

Using the Left/Right Earbud Only

• Starting with the earbuds in the case: Take the left/right earbud out
• Turn on the pairing function on the device you want to pair with the earbud