eBay

Description

Our hydraulic crimping tool can help you efficiently complete crimping work. Its hydraulic device can generate a pressure of up to 45KN and can crimp multiple specifications of copper aluminum terminals, with a good crimping effect and fast speed. The toolbox allows you to take it wherever you want, making it convenient and effortless to use.

Key Features

Build to Last: This product is made of high-quality cast iron and plastic that have been polished, electroplated, and sprayed. It has high density, is not easy to break with long service life.

Fast & Efficient: This product adopts a dual-speed oil inlet design, and the plunger adopts a leak-proof oil seal, which can quickly generate a hydraulic pressure of 45KN, improving your working efficiency.

Thoughtful Design: It can be adjusted to control the pressure of the hydraulic oil return, thus indirectly affecting the strength of the crimping action and helping to realize a more precise crimping effect. It can also quickly release the pressure in the hydraulic system, avoiding damage to the hydraulic system caused by prolonged high pressure, while also ensuring the safety of the operator.

Complete Set: 8 sets of dies allow you to cope with wider working requirements without needing repeat order placing, saving your time and effort.

Flexible Operation: The narrower crimping head (4.3*2.6in) can be inserted into some narrow positions, and 180 ° rotation allows you to operate more flexibly.

Convenient to Assemble: It uses a C-shaped guide groove design for the crimping head, which is more convenient for installing dies and can better fix them without easy misalignment.

Easy to Carry: This product is equipped with a toolbox with slots to hold the tools, allowing you to take them to the desired place without worrying about damage or loss.

Comfortable User Experience: The ergonomic handle, combined with an anti-slip design, can reduce fatigue during work, making you a comfortable user experience.

Details

Oil Seals: In case of oil leakage in the product, you can directly replace the internal oil seal to ensure its sealing and performance.

Thickening Dies: Thickening design can make crimping easy, and ensure long-term use without breaking.

Application

This product is suitable for power emergency repair, electrical cabinet boxes, copper aluminum terminal crimping, automotive battery installation, and railing wiring, and can be widely used in property management, automotive repair shops, automotive manufacturing plants, construction sites, and other places.

How to Use

1. Turn off the oil return knob and insert the die

2. Insert the wiring terminals and adjust the oil return knob to "ON".

3. Press the handle repeatedly.

4. Adjust the knob to "OFF" and remove the terminal.

Specification

Model: YQK-70

Material: Cast Iron, Plastic

Process: Polishing, Electroplating, Spray Molding

Color: Black

Crimping Form: Hexagonal

Assembly Required: Yes

Operation Mode: Handheld

Applicable Material: Copper Aluminum Terminals

Number of Dies: 8 Sets

Output: 8T/17636.98lbs/45KN

Stroke: 10mm/0.39in

Crimping Range: 4-70mm²

Die Specification: 4mm², 6mm², 10mm², 16mm², 25mm², 35mm², 50mm², 70mm²

Crimping Head Size: 11*6.5cm/4.3*2.6in

Handle Length: 20cm/7.9in

Tool Case Size: 33.5*15*7cm/13.2*5.9*2.8in

Product Size: 30*10cm/11.8*3.9in

Package Size: 35*8.5*18cm/13.78*3.35 *7.09in

Gross Weight: 3kg/6.61lbs

Package Included

1 * Hydraulic Crimping Tool

1 * Tool Case

8 Sets * Dies (One is Already Installed)

4 * Oil Seals

1 * English Manual

Notes

Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
To prevent you from operating without a die after receiving the product, this product has already installed half of a die on the crimping head when leaving the factory. It is strictly prohibited to start crimping without installing the die to avoid damaging the product.
When using it outside, please observe the usage space. If the space is too small, the product may not fit in or get stuck.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

Key Features

Great Durability: The head of this crimper is made of high-strength cast iron, so it is very hard and will not break easily. Moreover, the blackened dies are very anti-corrosion and anti-rust. So the crimper can be used for a long time.

Tight Crimp: This crimper has 6 tons of output force. So when you use it, the jaws will firmly clamp and crimp the item to keep it fixed without falling off so that the crimped wire ends will be very sturdy.

Labor-saving: The hydraulic crimper is much more labor-saving than the hand-pressed crimper. With the return valve open, you can easily press the lever continuously to crimp items.

Great Sealing Performance: The inner wall of the cylinder is smooth, with multiple layers of sealing, which not only saves oil consumption but also makes it safer to use.

High-quality C-type Jaw: The jaw of this crimper is a precise C-type jaw, which is not easy to deform and break, and has a long service life.

Multi-size Dies: This hydraulic crimper has 8 sets of different sizes of dies. You can choose the right crimping die according to different wire ends. Moreover, the model number is engraved on the die to make it easy for you to find the right one.

Portable and Easy to Store: We have customized a one-piece storage case for this tool to facilitate you to carry and store. Keeping all the tools in the case can avoid losing, too. The inline case that fits the product shape well also prevents damage to the crimper during transportation.

Ergonomic Design: Both the pressurized handle and the fixed handle are ergonomically designed to be comfortable to hold. Moreover, the fixed handle is designed with many wave patterns to prevent slippage.

Guaranteed Customer Service: Your satisfaction is our top priority, we will make things right for you. If you are unsatisfied with our products, you can contact us and we will ensure you have a pleasant shopping experience in our store.

Details

Pressure Relief Switch: There is a pressure relief switch on the crimper. When you need to crimp items and boost pressure, you can turn it OFF. When you need to remove the item and release pressure after crimping, you can turn it ON. It is very easy to operate.

Thickened Piston Core: This hydraulic crimper is equipped with thickened piston core, which is durable and wear-resistant. The thicker piston can hold the dies with a larger force area, so that they are not easily deformed and the ends are clamped more tightly.

Application

It is suitable for high-voltage child bushings, wire ends, bare terminals, and hexagonal crimping. It can be used for copper and aluminum ferrules. It is suitable for electric power, transportation, construction, shipbuilding industry, metallurgy industry, petrochemical industry, agriculture, and other fields.