MONSTER Super Strong Wood Adhesive Glue PVA Internal External Fast Dry 125/500ml

Description
A ready to use, PVA timber adhesive which is suitable for use in damp and humid conditions.

Bond It GLUE MONSTER WOOD ADHESIVE meets the
requirements of BS 4701 Creep Resistance standard
and EN 204 D3. It is also suitable for use with RF
bonding machinery.

Uses
GLUE MONSTER WOOD ADHESIVE can be used as a
general purpose, joinery adhesive, or for
applications where long term resistance to moisture
is a pre­requisite of the adhesive. Suitable for hard
and soft woods, decorative laminates, chipboard
blockwood and other engineered timber panels. Not
suitable for permanent immersion in water.

Preparation
Surfaces to be bonded must be clean, dry and free
from dust, grease or contaminants that may hinder
adhesion.

Application
Apply the adhesive to one surface only and bring the
two surfaces together within 3­4 minutes and clamp
for approximately 1 hour. After 1 hour careful
handling is permittable. Glued components should
be left overnight before machining. Remove excess
adhesive whilst wet using a damp cloth.

Limitations
Do not use on surfaces below 5oC except with RF
heating or on timber with a moisture content of
above 12% Timber which in use will be permanently
wet and stressed should be glued with a
thermosetting adhesive.

Coverage
Surface bonding 70­150g/m2 (1L will cover 6m214m2).
Assembly bonding 150­190g/m2 (1L will cover5m2­6m2).

Storage Conditions
Store in cool, dry conditions between a
temperature of 5°C and 35°C. Protect from frost
and direct sunlight.

Shelf Life
Use within 12 months.

Disposal of Containers
Do not leave empty containers where residue
could be harmful to children, animals or the
environment. Replace lids and remove any
containers to a central disposal point in
accordance with local regulations.
Any spilt material should be mopped up
immediately with an inert absorbent material,
such as sand.

Health & Safety
Please refer to separate material safety data
sheet for full handling, use and storage
instructions. Keep out of reach of children. It is
the users responsibility to determine suitability
for use. If in doubt contact our Technical
Department for advice.

Note: this information is for general guidance only,
since site conditions and labour are beyond our
control. It is recommended that users make their own
tests to determine suitability.

Specification Summary
Chemical Composition Aqueous Polyvinyl Acetate Dispersion
Appearance White liquid
Solubility in Water Miscible
Full Strength Obtained 24­48 hours after bonding

Container Sizes
Colour: White White White
Code: BDGD3125 BDGD3250 BDGD3500
Size: 125ml 250ml 500ml
Barcode: 5060021371973 5060021371966 5060021371959

Package Content
1x MONSTER Super Strong Wood Adhesive Glue Monster PVA Internal External Fast Dry 125/250/500ml