Set of 6 Fuel Injectors for 2012-2026 Chevrolet Impala/BuickLaCrosse #12634123

Product Description

Specification:

Item Type: Fuel Injector
Condition: Brand New
Warranty: 3 Year Warranty
OE Number: FJ1159, 12634123 12642125
Quantity Include: A Set of 6 Pieces

*Warranty: 3 Year

Built and tested to strict quality control standards

Fit For: (Please see the Compatibility)

Buick
LaCrosse 3.6L V6 2013 2014 2015 2016

Cadillac
ATS 3.6L V6 2013 2014 2015
CTS 3.6L V6 2014 2015
XTS 3.6L V6 2014 2015 2016 2017 2018 2019

Chevrolet
Impala 3.6L V6 2012 2013 2014 2015 2016 2017 2018 2019 2020


What dose a bad fuel injector cause?

 

    1.Fuel Consumption Increased.

    2.Nosie At Idle.

    3.Hard To Speed Up.

    4.Weak Pedal.

    5.Engine shake.

    6.Lightning Alarm.

 

How to replace fule injectors in your car?

1.The metal rod over the fuel injectors is the fuel rail. Use the socket and ratchet to remove the bolts and brackets holding the fuel rail in place. Depending on the model, some engines will need the fuel line disconnected from the fuel rail in order to move the rail.

A :Make sure the engine is cold enough to touch. Disconnect the battery.

B :Remove plastic engine covers using appropriate socket. Set covers aside.

 

2.First, disconnect the main fuel line at the end of the rail. There may be an additional line at the other end, so remove that one, too. The fuel rail is held in place by screws or bolts, depending on your car's setup. Remove these screws or bolts. If your wiring travels over the top of the rail, see the next step to disconnect the wiring first. With everything disconnected from the rail, pull it away from the fuel injectors. Most fuel rails are just pressed onto the injector tops, once you've removed the hold down screws or bolts it should pull away, with a little soomph.

 

 

3.Using a small standard screwdriver or pick remove the retainer clip from the fuel injector and work the injector from the rail. Keep a shop towel handy to catch excess fuel while removing the injector.

Inspect the old fuel injector making sure the sealing O rings are accounted for.Match the new injector to the old unit, some injector replacements can look a little different which is normal.

 

4.Use clean engine oil to lube the O ring seals preventing seal damage during reassembly.

 

5.Push the new injector into the fuel rail and reinsert the trainer clip and tighten down the fuel rail.

 

6.After the job is complete start the engine while using a flashlight to check for leaks to ensure the job was done correctly.

 





  • We accept Paypal only for the payment, and all orders should be paid through Ebay auction, please do not pay directly to our Paypal account.
  • Paypal allows to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check Paypal for more information.

  • For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order.

We would send out within 2 business days usually .  If there is any delay, you will be notified immediately via e- mail . 

l Items will be shipped to buyer's eBay registered address.    Please confirm your address before making payment. 

l We will NOT be responsible for any delay during delivery including but not limited to customs postage checking, strike, force majeure etc

Out 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. In addition , it allows customers to return new and unused products in their original factory condition for any reason within 30 days from the date of purchase.

Notice:

1.All returns must be pre-approved by Autopartm and have a return merchandise authorization (RMA) number.Unauthorized returns will not be accepted.

2.Buyers are responsible for appropriate packing, returning shipping cost, insurance and returning the item in “new” condition. Used items will not be accepted for return.

3.We will replace the returning item with an identical item, issue a full store credit or a full refund.

There is a difference between Genuine and OEM / OE Supplier brands. A genuine part is a part in the auto manufacturer’s original box with their logo on the box. OEM / OE Supplier is a brand licensed by the vehicle manufacturer and the part will not come with the vehicle manufacturer’s logo on it. OEM / OE Supplier parts are often the same parts you’d get at the dealership, just in a different box. We do not accept returns based solely on where a part is manufactured.

Copyright © 2023 Dianxiaomi