WiFi LoRa 32 Heltec V4 ESP32 Bluetooth 0.96" OLED Board + Antenna + GPS Module
Product View
Detail
Features:
- Based on ESP32-S3R2 and SX-1262, supporting Wi-Fi b/g/n, BLE, and LoRa communication.
- 2MB PSRAM and 16MB external flash memory, ideal for UI and complex systems.
High-power version with LoRa transmit power increased to 28±1dBm.
Form factor and pinout compatible with WiFi LoRa 32 V3.
PC case protects the screen, integrated FPC 2.4G antenna.
New SH1.25-2P solar panel interface.
Optimized lithium battery management.
New SH1.25-8Pin GNSS interface.
USB Type-C interface with integrated voltage regulation, ESD protection, short-circuit protection, and RF isolation design; low power consumption <20μA.
- Based on ESP32-S3R2 and SX-1262, supporting Wi-Fi b/g/n, BLE, and LoRa communication.
- 2MB PSRAM and 16MB external flash memory, ideal for UI and complex systems.
High-power version with LoRa transmit power increased to 28±1dBm.
Form factor and pinout compatible with WiFi LoRa 32 V3.
PC case protects the screen, integrated FPC 2.4G antenna.
New SH1.25-2P solar panel interface.
Optimized lithium battery management.
New SH1.25-8Pin GNSS interface.
USB Type-C interface with integrated voltage regulation, ESD protection, short-circuit protection, and RF isolation design; low power consumption <20μA.
Specifications:
Main Controller: ESP32-S3R2
LoRa Chip: SX-1262
Frequency: 433~510 MHz, 863~928 MHz
Maximum transmit power: 21±1 dBm, 28±1 dBm
Maximum receive sensitivity: -137 dBm
Wi-Fi: 802.11 b/g/n, up to 150 Mbps
Bluetooth: Bluetooth LE, Bluetooth 5, Bluetooth Mesh
OLED: SSD1315 (0.96-inch, 128×64 resolution)
Power Supply: 5V@USB/Solar, 3.3-4.2V@Battery
Hardware Resources: 7x ADC1 + 2x ADC2, 7x Touch, 3x UART, 2x I2C, 2x I2S, 4x SPI, etc.
Storage: 384KB ROM; 512KB SRAM; 16KB RTC-SRAM; 16MB Flash; 2MB PSRAM
Interfaces: USB Type-C; SH1.25-2P lithium battery connector; SH1.25-2P solar panel connector; 2x IPEX1.0 ANT (LoRa and 2.4G); 2x 18x2.54 header pins, 2x 2x2.54 header pins
Operating Temperature: -40~85°C (OLED operating temperature: -40~70°C)
Dimensions: 51.7*25.4*10.7mm
Main Controller: ESP32-S3R2
LoRa Chip: SX-1262
Frequency: 433~510 MHz, 863~928 MHz
Maximum transmit power: 21±1 dBm, 28±1 dBm
Maximum receive sensitivity: -137 dBm
Wi-Fi: 802.11 b/g/n, up to 150 Mbps
Bluetooth: Bluetooth LE, Bluetooth 5, Bluetooth Mesh
OLED: SSD1315 (0.96-inch, 128×64 resolution)
Power Supply: 5V@USB/Solar, 3.3-4.2V@Battery
Hardware Resources: 7x ADC1 + 2x ADC2, 7x Touch, 3x UART, 2x I2C, 2x I2S, 4x SPI, etc.
Storage: 384KB ROM; 512KB SRAM; 16KB RTC-SRAM; 16MB Flash; 2MB PSRAM
Interfaces: USB Type-C; SH1.25-2P lithium battery connector; SH1.25-2P solar panel connector; 2x IPEX1.0 ANT (LoRa and 2.4G); 2x 18x2.54 header pins, 2x 2x2.54 header pins
Operating Temperature: -40~85°C (OLED operating temperature: -40~70°C)
Dimensions: 51.7*25.4*10.7mm
Product Introduction:
WiFi LoRa 32 V4 represents a comprehensive upgrade to the classic LoRa development board. Since its launch, this product series has been highly favored by developers and manufacturers. Building upon the robust capabilities of its predecessor, the V4 version delivers comprehensive optimizations in transmission power, power management, expandability, and other hardware designs. It serves diverse IoT applications including smart cities, agricultural monitoring, smart homes, industrial control, security systems, and wireless metering, delivering a more efficient and flexible development experience.
WiFi LoRa 32 V4 represents a comprehensive upgrade to the classic LoRa development board. Since its launch, this product series has been highly favored by developers and manufacturers. Building upon the robust capabilities of its predecessor, the V4 version delivers comprehensive optimizations in transmission power, power management, expandability, and other hardware designs. It serves diverse IoT applications including smart cities, agricultural monitoring, smart homes, industrial control, security systems, and wireless metering, delivering a more efficient and flexible development experience.
Application Scenarios:
Environmental Sensors
Industrial IoT
Asset Tracking
Remote Meter Reading
Smart Agriculture
Wireless Alarms
Innovative Projects & Geek Applications
Environmental Sensors
Industrial IoT
Asset Tracking
Remote Meter Reading
Smart Agriculture
Wireless Alarms
Innovative Projects & Geek Applications
Product List:
1X Development Board
1X Antenna
2X Terminal Cables
4X Pin Header
1X GPS Module (Optional)
1X Development Board
1X Antenna
2X Terminal Cables
4X Pin Header
1X GPS Module (Optional)
Copyright © 2017 DataDaciques
Product View
Detail
Features:
- Based on ESP32-S3R2 and SX-1262, supporting Wi-Fi b/g/n, BLE, and LoRa communication.
- 2MB PSRAM and 16MB external flash memory, ideal for UI and complex systems.
High-power version with LoRa transmit power increased to 28±1dBm.
Form factor and pinout compatible with WiFi LoRa 32 V3.
PC case protects the screen, integrated FPC 2.4G antenna.
New SH1.25-2P solar panel interface.
Optimized lithium battery management.
New SH1.25-8Pin GNSS interface.
USB Type-C interface with integrated voltage regulation, ESD protection, short-circuit protection, and RF isolation design; low power consumption <20μA.
- Based on ESP32-S3R2 and SX-1262, supporting Wi-Fi b/g/n, BLE, and LoRa communication.
- 2MB PSRAM and 16MB external flash memory, ideal for UI and complex systems.
High-power version with LoRa transmit power increased to 28±1dBm.
Form factor and pinout compatible with WiFi LoRa 32 V3.
PC case protects the screen, integrated FPC 2.4G antenna.
New SH1.25-2P solar panel interface.
Optimized lithium battery management.
New SH1.25-8Pin GNSS interface.
USB Type-C interface with integrated voltage regulation, ESD protection, short-circuit protection, and RF isolation design; low power consumption <20μA.
Specifications:
Main Controller: ESP32-S3R2
LoRa Chip: SX-1262
Frequency: 433~510 MHz, 863~928 MHz
Maximum transmit power: 21±1 dBm, 28±1 dBm
Maximum receive sensitivity: -137 dBm
Wi-Fi: 802.11 b/g/n, up to 150 Mbps
Bluetooth: Bluetooth LE, Bluetooth 5, Bluetooth Mesh
OLED: SSD1315 (0.96-inch, 128×64 resolution)
Power Supply: 5V@USB/Solar, 3.3-4.2V@Battery
Hardware Resources: 7x ADC1 + 2x ADC2, 7x Touch, 3x UART, 2x I2C, 2x I2S, 4x SPI, etc.
Storage: 384KB ROM; 512KB SRAM; 16KB RTC-SRAM; 16MB Flash; 2MB PSRAM
Interfaces: USB Type-C; SH1.25-2P lithium battery connector; SH1.25-2P solar panel connector; 2x IPEX1.0 ANT (LoRa and 2.4G); 2x 18x2.54 header pins, 2x 2x2.54 header pins
Operating Temperature: -40~85°C (OLED operating temperature: -40~70°C)
Dimensions: 51.7*25.4*10.7mm
Main Controller: ESP32-S3R2
LoRa Chip: SX-1262
Frequency: 433~510 MHz, 863~928 MHz
Maximum transmit power: 21±1 dBm, 28±1 dBm
Maximum receive sensitivity: -137 dBm
Wi-Fi: 802.11 b/g/n, up to 150 Mbps
Bluetooth: Bluetooth LE, Bluetooth 5, Bluetooth Mesh
OLED: SSD1315 (0.96-inch, 128×64 resolution)
Power Supply: 5V@USB/Solar, 3.3-4.2V@Battery
Hardware Resources: 7x ADC1 + 2x ADC2, 7x Touch, 3x UART, 2x I2C, 2x I2S, 4x SPI, etc.
Storage: 384KB ROM; 512KB SRAM; 16KB RTC-SRAM; 16MB Flash; 2MB PSRAM
Interfaces: USB Type-C; SH1.25-2P lithium battery connector; SH1.25-2P solar panel connector; 2x IPEX1.0 ANT (LoRa and 2.4G); 2x 18x2.54 header pins, 2x 2x2.54 header pins
Operating Temperature: -40~85°C (OLED operating temperature: -40~70°C)
Dimensions: 51.7*25.4*10.7mm
Product Introduction:
WiFi LoRa 32 V4 represents a comprehensive upgrade to the classic LoRa development board. Since its launch, this product series has been highly favored by developers and manufacturers. Building upon the robust capabilities of its predecessor, the V4 version delivers comprehensive optimizations in transmission power, power management, expandability, and other hardware designs. It serves diverse IoT applications including smart cities, agricultural monitoring, smart homes, industrial control, security systems, and wireless metering, delivering a more efficient and flexible development experience.
WiFi LoRa 32 V4 represents a comprehensive upgrade to the classic LoRa development board. Since its launch, this product series has been highly favored by developers and manufacturers. Building upon the robust capabilities of its predecessor, the V4 version delivers comprehensive optimizations in transmission power, power management, expandability, and other hardware designs. It serves diverse IoT applications including smart cities, agricultural monitoring, smart homes, industrial control, security systems, and wireless metering, delivering a more efficient and flexible development experience.
Application Scenarios:
Environmental Sensors
Industrial IoT
Asset Tracking
Remote Meter Reading
Smart Agriculture
Wireless Alarms
Innovative Projects & Geek Applications
Environmental Sensors
Industrial IoT
Asset Tracking
Remote Meter Reading
Smart Agriculture
Wireless Alarms
Innovative Projects & Geek Applications
Product List:
1X Development Board
1X Antenna
2X Terminal Cables
4X Pin Header
1X GPS Module (Optional)
1X Development Board
1X Antenna
2X Terminal Cables
4X Pin Header
1X GPS Module (Optional)
1)All items will be shipped to your eBay Address .Please make sure to provide us with correct,precise and detailed shipping address.
2) Economy shipping needs 2-5 weeks to arrive mostly.
In rare case, it can take up to 6-8 weeks.
It depends on your location and local postal service, as well as the weather condition along the shipping.
But the accurate time is depend on the customs .
If you not get it on time , please don't hesitate to contact us .
If you need a tracking number, you could choose Standard Shipping.
We accept PayPal only.
We only ship item to your PayPal verified address.
Please pay attention that import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you. We sincerely hope that you can leave us a positive comment once you received the item,We also will leave a positive feedback immediately after payment is received. If for some reason there is any issue with the purchase, please contact us through "My Messages" or "Ask Seller Questions" before leaving neutral or negative feedback,we will be glad to work with you to have it resolved.
Our working time: Monday to Friday, 9:00~18:00
Thanks for your shopping
Am 03.04.2026 hat der Verkäufer die folgenden Angaben hinzugefügt: