SPI 25xx EPROM Programmer BIOS009 PIC 0.98d12 Promotion Clip PLCC32+SOIC US

Details

Introducing our newest Universal Willem EPROM programmer PCB5.0E SMD version! This is a brand-new and fully tested enhanced Dual Power (USB/AC) Willem Universal EPROM EEPROM programmer, PCB version PCB5.0SMD. We\'ve added support for those new 25 series SPI Flash Bios chips ! This board has many enhanced features, such as built-in PLCC32, FWH / LPC sockets, thus NO NEED to pay extra to purchase these optional adapters. The PCB layout is fully optimized and the digital circuitry is separated from the power supply circuit, thus reducing interference. High precision digital switching ICs are used to control the Vpp circuit ( vs cheap regular transistor controlled), thus dramatically improves the burning accuracy and reliability by multitudes. Quality components are used, for example, the high current tolerant coil is used to boost the robustness of the circuitry. Optional higher Vcc voltages (5.6v and 6.2v) will be available when an external AC power supply is used. This is very important when you want to smoothly and reliably burn those old CMOS and even older NMOS EPROM chips. This programmer can also read and burn EEPROM, FLASH, and Microcontroller (MCS-51, AVR and PIC family) chips. We also added software support for more Winbond chips !
The last PCB version:PCB5.0T-2012
 
Enhanced power supply.
Enhanced VPP voltage supply.
PCB wiring optimization.
DC power and USB power auto Switching.
New PCB ver. PCB5.0T-2012.
Data signal optimization.
Cancel PCB5-PCB3B switch.
 

New update to PCB 5.0T-2013

New features:
Enhanced 3.6V power supply.
Use CMOS voltage regulator IC to get 3.3V low voltage



This ready-to-go package includes everything you need to get your project start rolling:


1. Willem Universal E(e)prom Programmer Board, PCB version 5.0E SMD version, fully assembled

2.clip PLCC32+SOIC 8 pin adapter+USB cable+Computer cable (DB25)



Device types supported

SPI Flash Bios chips support added !

SPANSION
S25FL004A/040A,S25FL008A,S25FL040A-T,S25FL040A-B,S25FL016A,S25FL032A
S25FL064A

WINBOND
W25X010,W25X020,W25X040,W25X080,W25X16,W25X32,W25X64

MXIC
MX25L512,MX25L1005,MX25L2005,MX25L4005A,MX25L8005A,MX25L1605,MX25L3205
MX25L6405

EON
EN25B05,EN25B10,EN25B20,EN25B40,EN25B80,EN25B16,EN25B32,EN25B64
EN25P05,EN25P10,EN25P20,EN25P40,EN25BP80,EN25P16,EN25P32,EN25P64
EN25D80,EN25D16,EN25F20,EN25F40,EN25F80,EN25F16

AMIC
A25L05P-B,A25L10P-B,A25L20P-B,A25L05P-T,A25L10P-T,A25L20P-T,A25L512
A25L010,A25L020,A25L040,A25L080;,A25L016,A25L032

pFLASH
Pm25LV512,Pm25LV010,Pm25LV020,Pm25LV040,Pm25LV080,Pm25LV016

Numonyx (ST)
M25P05,M25P10,M25P20,M25P40,M25P80,M25P16,M25P32,M25P64
M25PE10,M25PE20,M25PE40,M25PE80,
**M45PE10,M45PE20,M45PE40,M45PE80,M45PE16
M25PX80,M25PX16,M25PX32,M25PX64

ATMEL
AT25DF021,AT25DF041A,AT25DF081,AT25DF081A,AT25DF161,AT25DF321A
AT25DF641,AT26DF041,AT26DF161A,AT26DF321,

** AT45DF011D,AT45DF021D,AT45DF041D,AT45DF081D,AT45DB161D,AT45DF321D,AT45DF641D

EPROM

27C64, 27C128, 27C256, 27C512, 27C010, 27C020, 27C040, 27C1001
M27C1001, M27C2001, M27C4001
27C080 (A19) , M27C801, M87C257
27(C)16, 27(C)32
2764, 27128, 27256, 27512, 27010

EEPROM

28C65,28C64, 28C128, 28C256,28C512, 28C010, 28C020, 28C040
M28C16A/17A (DIP28)
(Adapter or Jumper) 28C16,XLS2816 (DIP24)

FLASH Memory

28F64, 28F128, 28F256, 28F512,28F010, 28F020
MX26C1000, MX26C2000, MX28F1000, MX28F2000
Am28F256A, Am28F512A, Am28F010A, Am28F020A (New command erase/prog.)
-- intel ---
i28F001BX, 28F004, 28F008, 28F016

FLASH Memory

29F64, 29F128,29F256, 29F512,29F010, 29F020, 29F040, 29F080
29F001,29F002, 29F004, 29F008, 29F016, 29F032

Serial (I2C) EEPROM
24Cxx

24C02,24C04,24C08,24C16, 85C72, 85C82, 85C92
--- page write ----
24C32,24C64,24C128,24C256,24C512

Microwire EEPROM

<------ Data 8bit -----> (pin 6 ->ORG. [Schematic connect to GND])
93C06, 93C46, 93LC46, 93C56, 93C57,
93C66, 93C76, 93C86 (8bit), AT59C11, AT59C22, AT59C13
CAT35C102, CAT35C104, CAT35C108 (pullup pin7)
<------Data 16bit------> (pin 6 ->NC [No Connect])
93C06A ,93C46X,93C56,93C66,93C76,93C86 (NS)

MicroChip PIC

16C84 , 16F84 ,16F84A , 16F627/16F628
12C508/A , 12C509/A , 12CE518 , 12CE519 , 16C505
16C620 , 16C621 , 16C622 , 16CE623 , 16CE624 , 16CE625 , 16C710/711
---ICSP connector----(you will need to have an optional PIC adapter in order to program these newly added PICs)
16F870 , 16F871 , 16F872 , 16F873 , 16F874 , 16F876 , 16F877 PIC16F873A , PIC16F874A , PIC16F876A , PIC16F877A
-Add PIC microchip 14bit
PIC12F629 , PIC12F675 , PIC16F630 , PIC16F676 , PIC12F635 , PIC12F683 , PIC16F636 , PIC16F684 , PIC16F688
PIC16F72/73/74/76/77 , PIC16F737/747/767/777 , PIC16F87/88 , rfPIC12F675x , PIC16F785/PS200 , PIC16F716
-Add microchip 14bit,12bit OTP
PIC12C671 , PIC12C672 , PIC12CE673 , PIC12CE674
PIC16C61/71 , PIC16C62/64/65/73 , PIC16C62A/62B/62C/63/63A/64A/65A/65B/66/67
PIC16C72/72A/73A/74A/74B/76/77 , PIC16C620/620A/621/621A/622/622A
PIC16CE/623/624/625 , PIC16C710/711/712/716 , PIC16C773/774 , PIC16C745/765/923/924 , PIC16C925/926
PIC16C554/556/557/558 , PIC16C432/433 , PIC16C717/770/771/781/782
-Add PIC microchip 14bit
PIC12F629/675 , PIC16F630/676 , PIC12F635/683 , PIC16F636/684/688 , PIC16F72/73/74/76/77 , PIC16F737/747/767/777 , PIC16F87/88 , rfPIC12F675x , PIC16F785/PS200 , PIC16F716
-Add microchip 14bit OTP
PIC12C671 , PIC12C672 , PIC12CE673 , PIC12CE674 , PIC16C61/71 , PIC16C62/64/65/73 , PIC16C62A/62B/62C/63/63A/64A/65A/65B/66/67 , PIC16C72/72A/73A/74A/74B/76/77 , PIC16C620/620A/621/621A/622/622A , PIC16CE/623/624/625 , PIC16C710/711/712/716 , PIC16C773/774 , PIC16C745/765/923/924 , PIC16C925/926 , PIC16C554/556/557/558 , PIC16C432/433 , PIC16C717/770/771/781/782
-Add PIC microchip 12bit (FLASH memory)
PIC12F508/509 , PIC10F200/202/204/206 , PIC16F505 , PIC16F54/57
-Add PIC18Fxxx
PIC18F242 , 18F248 , 18F252 , 18F258 , 18F442 , 18F448 , 16F452 , 16F458
PIC18F1220 , 18F2220 , 18F4220 , 18F1320 , 18F2320 , 18F4320
PIC18F6520 , 18F6620 , 18F6720 , 18F8520 , 18F8620 , 18F8720
PIC18F2331 , 18F2431 , 18F4331 , 18F4431
PIC18F6525 , 18F6621 , 18F8525 , 18F8621
PIC18F6585 , 18F6680 , 18F8585 , 18F8680
PIC18F2439 , 18F2539 , 18F4439 , 18F4539
PIC18F6410 , 18F8410 , 18F6490 , 18F8490
Add PIC18Fxxx
PIC18F2410 , PIC18F2420 , PIC18F2455
PIC18F2510 , PIC18F2515 , PIC18F2520 , PIC18F2525 , PIC18F2550 , PIC18F2585
PIC18F2610 , PIC18F2620 , PIC18F2680
PIC18F4410, PIC18F4420 , PIC18F4455
PIC18F4510 , PIC18F4515 , PIC18F4520 , PIC18F4525 , PIC18F4550 , PIC18F4585
PIC18F4610 , PIC18F4620 , PIC18F4680
Add Find and edit value OSCCAL (PIC12F629/675 , PIC16F630/676)
Add Edit config at address 0x2008,0x2009 (PIC12F635/683 , PIC16F636/684/688 , PIC16F785)
Fixed Programming PIC all
Test on chip
PIC12F675 , PIC16F676 , PIC16F684 ,PIC16F767, PIC16F74
PIC16F872 , PIC16F876 , PIC16F877, PIC16F876A, PIC16F873A, PIC16F819
PIC16F84 , PIC16F84A , PIC16F628, PIC16F628A,
eprom PIC12C509JW , PIC16C505JW , PIC16C711JW , PIC16CE625JW
PIC18F458 , PIC18F4320 , PIC18LF258 , PIC18F4539 , PIC18F4431

Atmel Flash Memory
(Sector Programming)
(Software Data Protection)
AT29C256, AT29C512,AT29C010A, AT29C020, AT29C040,AT29C040A
W29EE512,W29EE011, W29EE012, W29C020(128),W29C040
PH29EE010(W29EE011)

ASD AE29F1008 (AT29C010), AE29F2008 (AT29C020)
Ver 0.992 up(DOS). Can run under win9x
(disable prog. CPUIdle or CPUCool)

Atmel Flash Memory
AT49Fxxx (Subset 29Fxxx)
(Byte-by-Byte Programming)
(Software Data Protection)

Command seq. 5555/AA, 2AAA/55, 5555/A0
AT49F512, AT49F010, AT49F020, AT49F040
SST39SF010, SST3S9F020 ,SST39SF040
AT49F001,AT49F002 , AT49F008A

Command seq. 555/AA, 2AA/55, 555/A0
Am29F512, Am29F010, Am29F020, Am29F040,HY29F080
29F002, 29F002T, Pm29F002T

Serial Peripheral Interface (SPI)
EEPROM Mode0 (0,0)
AT25xxx, W95xxx
[Atmel] AT25010,020, 040 (A8-A0)
AT25080, 160, 320, 640, 128, 256 (A15-A0)
[ST] W95010....256, Microchip 25x010 - 25x640

--- Byte programming
25010,25020,25040
--- Page programming
25C080,25C160,25C320,25C640,25C128,25C256,25C512
AT25HP256,AT25HP512
AT25HP1024 (24bit address)

-- CAT64LCxxx (16bit DATA IN/OUT) use Socket 93Cxxx
CAT64LC010, CAT64LC020, CAT64LC040

Atmel EEPROM (page prog.)
(Software Data Protection)

AT28C256, AT28C010, AT28C040

Nonvaltile SRAM (DS12xx)

DS1220,DS1225Y, DS1230Y/AB, DS1245Y/AB, DS1249Y/AB

static RAM (Test RAM)

6116, 6264, 62256, 62512, 628128

EPROM winbond,SST
Electrical Erase Chip

W27E512, W27E010, W27C010, W27C020, W27C040
SST27SF256, SST27SF512, SST27SF010, SST27SF020
MX26C4000
Vcc = 3.3-3.6V SST37VF512, SST37VF010, SST37VF020, SST37VF040

Flash Memory SST,Sanyo

SST28SF040A ,LE28F4001

 



Adapters

Atmel AT89Cxx (MCS-51)
Adapter 32pin to MCS-51

Atmel Auto Setect
AT89C51,52,55, AT89LV51,52,55
AT89S8252 (8K+2K), AT89S53, AT89LS8252,AT89LS53
AT89C1051,AT89C2051,AT89C4051 (20pin)
AT89C51RC (32KB), AT89C55WD (6.2V)
SST89C54/58, SI89C52
Intel Auto Select
i87C51, i87C51FA, i87C51FB
------------------------------------------------
i8xC51,i8xC52,i8xC54,i8xC58 (tWP = 100uS*25 Pulse)

Atmel AVR 8-bit RISC AT90Sxxx
(Parallel programming)
Adapter 32pin to MCS-51

(read,write,erase,verify,checkempty,Lockbits ,Fusebits) [Flash memory/EEPROM]
AT90S1200,AT90S2313
90S2333, 90S4433, 90S4414, 90S8515, 90S4434, 90S8535
reference AT90S2313 pin
Function Lockbitread AT90S2313 Errata Sheet.pdf

MCS-48,MCS-41
Adapter 32pin to MCS-48/41
ROM (read/verify)
P8048AH, P8049AH,P8050AH, P8042AH Vea = 12V
P8041, P8042

OTP (read/verify/Progam)
P8748,P8749H,P8742HVea = 18V

EPROM (read/verify/Progam)
D8748,D8749,D8742,D8741, D8742 Vea = 18V

FLASH memory 8/16bit
(Software Data Protection)
Adapter (TSOP48)

Am29F400,Am29F800,29F160,29F320 (read,write byte mode)
HY29F200, HY29F400, HY29F800 , AT49F2048A, AT49F4096A, AT49F8192A

FLASH memory 8/16bit (Vpp12V)
(Software Data Protection)
Adapter (TSOP48)

i28F200,i28F400,i28F800,i28F160 (TSOP48)
28F001(DIP32 or PLCC32)

EPROM 16bit (DIP40) (1-4Mbit)
Adapter Eprom 16bit
Eprom only

27C1024 (27C210), 27C2048 (27C2002), 27C4096 (27C4002),
Schematic by Toomas Toots
(read,Program byte mode
by use Resister pull up Data Bus (0xFF), A0 select low or high byte)

EPROM 16bit (DIP42) (4-32Mbit)
Adapter Eprom DIP42
Eprom only

M27C400(DIP40), 27C800, 27C160, 27C322
Schematic by Toomas Toots
(read,Program byte mode
by use Resister pull up Data Bus (0xFF), A0 select low or high byte)

FLASH memory 8/16bit
(Software Data Protection)
Adapter (TSOP48LV)

29LV200, 29LV400,29LV800,29LV160,29LV320 (read,write byte mode)

Firmware Hub / LPC FLASH
Adapter Firmware Hub/LPC (PLCC32) (PP mode) (3.3V)
-- Firmware Hub
82802AB, 82802AC, AT49LW040, AT49LW080

SST49LF002A, SST49LF003A, SST49LF004A, SST49LF008A, PMC 49FL008T
W49V002FA, W39V040FA

-- LPC flash
SST49LF020, SST49LF040 W49V002A, W39V040A
WINBOND
W39V040FA, W39V040FAP, W39V040BP, W39V04OBPZ, W49V040FBPZ, W39V040FCP, W39V040FCPZ
W39V080AP, W39V080APZ, W39V080FAP, W39V080FAPZ (Newly added for software 0.98D8)

P28F002BC
Adapter P28F002BC (DIP40)

BOOT BLOCK FLASH MEMORY
- P28F002BC

EPROM Programmer PCB5.0E ( NEW!!! Developed Board (October 2009))

Willem Eprom programmer PCB5.0E can be use for :

. Upgrading, Programming BIOS chip, Repairing PC motherboard BIOS chip.


. VCD, DVD, Color TV, Copier, Fax machine, Printer main board maintaining or reparing.
. Car memory device code reading, writing
. MCU development: programming for MCS-51 series, AVR series and PIC series MCU.
. Programming support for over 1500 IC devices, includes EPROM , EEPROM , FLASH , PIC , AVR , MCS-51 , MCS-48, 27Cxx , 28Cxx 28Fxx , 29Fxx , AT29Cxxx , 24Cxx , 93Cxx , PIC16xxx , DS12xx , AT89Cxx , AT89Cx051 , AT25xxx , AT90Sxxx , EPROM16bit , 29Fx00 , 28Fx00

Hardware Features :
. Support DIP32 to PLCC32 and PLCC Firmware HUB/LPC on board.
. Special PCB4C and PCB4.5C only able to support the chip 29/39/49LVxxx (Low Voltage 3.3V)
. Use power supply from a USB port or DC Adapter (9-12 VDC) by setting jumper.
. Faster than Willem EPROM Programmer PCB3B , PCB3B+ (Standard/Universal) and Enhanced Willem about 50%. It also programs faster than Willem EPROM Programmer (PCB3.5C) , (PCB4C) about 20%. For full capacity, it should be used with with software willem Version 0.98D12 ( bundle in CD-Rom ).
. It can set changes to be PCB3B or PCB4.5C by using jumper setting (when wish use Software of the ordinary)
. The PCB5.0E can unprotect the AM29F040B flash memory chip.
. The back of the circuit board is covered by a plastic board that is neat and protects board from short circuiting. [ see pictures ]

Software Features :
. Windows based programming software support 98 / ME / NT / 2000 / XP
. Latest !! Software willem PCB5.0E version 0.98D12 (Update : 13 September 2010) can run on The hardware PCB3.5/PCB4C/ PCB4.5C only.

. Software willem for PCB5.0E version0.98D12 support for over PICs microchip more than Software 0.97ja.
. Add PIC microchip 12bit (FLASH memory)
PIC12F508/509 , PIC10F200/202/204/206 , PIC16F505 , PIC16F54/57
. Add PIC18Fxxx
PIC18F242 , 18F248 , 18F252 , 18F258 , 18F442 , 18F448 , 16F452 , 16F458
PIC18F1220 , 18F2220 , 18F4220 , 18F1320 , 18F2320 , 18F4320
PIC18F6520 , 18F6620 , 18F6720 , 18F8520 , 18F8620 , 18F8720
PIC18F2331 , 18F2431 , 18F4331 , 18F4431
PIC18F6525 , 18F6621 , 18F8525 , 18F8621
PIC18F6585 , 18F6680 , 18F8585 , 18F8680
PIC18F2439 , 18F2539 , 18F4439 , 18F4539
PIC18F6410 , 18F8410 , 18F6490 , 18F8490
. Add PIC18Fxxx
PIC18F2410 , PIC18F2420 , PIC18F2455
PIC18F2510 , PIC18F2515 , PIC18F2520 , PIC18F2525 , PIC18F2550 , PIC18F2585
PIC18F2610 , PIC18F2620 , PIC18F2680
PIC18F4410, PIC18F4420 , PIC18F4455
PIC18F4510 , PIC18F4515 , PIC18F4520 , PIC18F4525 , PIC18F4550 , PIC18F4585
PIC18F4610 , PIC18F4620 , PIC18F4680
. Add Find and edit value OSCCAL (PIC12F629/675 , PIC16F630/676)
. Add Edit config at address 0x2008,0x2009 (PIC12F635/683 , PIC16F636/684/688 , PIC16F785)
. Fixed Programming PIC all
. Test on chip
PIC12F675 , PIC16F676 , PIC16F684 ,PIC16F767, PIC16F74
PIC16F872 , PIC16F876 , PIC16F877, PIC16F876A, PIC16F873A, PIC16F819
PIC16F84 , PIC16F84A , PIC16F628, PIC16F628A,
eprom PIC12C509JW , PIC16C505JW , PIC16C711JW , PIC16CE625JW
PIC18F458 , PIC18F4320 , PIC18LF258 , PIC18F4539 , PIC18F4431
. Fixed Write/read/verify EEPROM 18F4550
. Fixed Bug program 18Fxxx run on Windows XP/2000 (test PIC18F4539 , PIC18F2680 , PIC18F2431 , PIC18F258 , PIC18F4220 , PIC18F4550)
. Add find OSCCAL 10Fx00, 12F50x, 12F6xx
(test PIC10F202, 12F509, 12F675)
. Fixed Programm AT89C8253 (Want modify Adapter MCS-51) (test on AT89S8253)

. Production control by an engineer who developed "Willem EPROM Programmer Version PCB3b (Standard/Universal) " and developed software Free (Now!! 0.97ja) , 0.97j , 0.97i+ , 0.98i , 0.97i , 0.97h , 0.97g

We only accept your Ebay Address,Please Make sure it's 100% right.

The items you ordered will be shipped out in 3 business day when your payment is clear. The arrival time is 5-20 business days to United States usually.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor negative feedback, so that we can satisfactorily address your concerns.

This is the description of Payment Method. 


Do not dismiss your dream.

To be without dream is to be without hope.

To be without hope is to be without purpose.

Do not run through your life so fast that you forget not only where you have been, but also where you are 

going.

Life is not race, but a journey to be savored each step of the way.

This is the description of Returns Policy. 

Do not dismiss your dream.

To be without dream is to be without hope.

To be without hope is to be without purpose.

Do not run through your life so fast that you forget not only where you have been, but also where you are 

going.

Life is not race, but a journey to be savored each step of the way.

Copyright©2017 DataCaciques

SPI 25xx EPROM Programmer BIOS009 PIC 0.98d12 Promotion Clip PLCC32+SOIC US

Item Description

Introducing our newest Universal Willem EPROM programmer PCB5.0E SMD version! This is a brand-new and fully tested enhanced Dual Power (USB/AC) Willem Universal EPROM EEPROM programmer, PCB version PCB5.0SMD. We\'ve added support for those new 25 series SPI Flash Bios chips ! This board has many enhanced features, such as built-in PLCC32, FWH / LPC sockets, thus NO NEED to pay extra to purchase these optional adapters. The PCB layout is fully optimized and the digital circuitry is separated from the power supply circuit, thus reducing interference. High precision digital switching ICs are used to control the Vpp circuit ( vs cheap regular transistor controlled), thus dramatically improves the burning accuracy and reliability by multitudes. Quality components are used, for example, the high current tolerant coil is used to boost the robustness of the circuitry. Optional higher Vcc voltages (5.6v and 6.2v) will be available when an external AC power supply is used. This is very important when you want to smoothly and reliably burn those old CMOS and even older NMOS EPROM chips. This programmer can also read and burn EEPROM, FLASH, and Microcontroller (MCS-51, AVR and PIC family) chips. We also added software support for more Winbond chips !
The last PCB version:PCB5.0T-2012
 
Enhanced power supply.
Enhanced VPP voltage supply.
PCB wiring optimization.
DC power and USB power auto Switching.
New PCB ver. PCB5.0T-2012.
Data signal optimization.
Cancel PCB5-PCB3B switch.
 

New update to PCB 5.0T-2013

New features:
Enhanced 3.6V power supply.
Use CMOS voltage regulator IC to get 3.3V low voltage



This ready-to-go package includes everything you need to get your project start rolling:


1. Willem Universal E(e)prom Programmer Board, PCB version 5.0E SMD version, fully assembled

2.clip PLCC32+SOIC 8 pin adapter+USB cable+Computer cable (DB25)



Device types supported

SPI Flash Bios chips support added !

SPANSION
S25FL004A/040A,S25FL008A,S25FL040A-T,S25FL040A-B,S25FL016A,S25FL032A
S25FL064A

WINBOND
W25X010,W25X020,W25X040,W25X080,W25X16,W25X32,W25X64

MXIC
MX25L512,MX25L1005,MX25L2005,MX25L4005A,MX25L8005A,MX25L1605,MX25L3205
MX25L6405

EON
EN25B05,EN25B10,EN25B20,EN25B40,EN25B80,EN25B16,EN25B32,EN25B64
EN25P05,EN25P10,EN25P20,EN25P40,EN25BP80,EN25P16,EN25P32,EN25P64
EN25D80,EN25D16,EN25F20,EN25F40,EN25F80,EN25F16

AMIC
A25L05P-B,A25L10P-B,A25L20P-B,A25L05P-T,A25L10P-T,A25L20P-T,A25L512
A25L010,A25L020,A25L040,A25L080;,A25L016,A25L032

pFLASH
Pm25LV512,Pm25LV010,Pm25LV020,Pm25LV040,Pm25LV080,Pm25LV016

Numonyx (ST)
M25P05,M25P10,M25P20,M25P40,M25P80,M25P16,M25P32,M25P64
M25PE10,M25PE20,M25PE40,M25PE80,
**M45PE10,M45PE20,M45PE40,M45PE80,M45PE16
M25PX80,M25PX16,M25PX32,M25PX64

ATMEL
AT25DF021,AT25DF041A,AT25DF081,AT25DF081A,AT25DF161,AT25DF321A
AT25DF641,AT26DF041,AT26DF161A,AT26DF321,

** AT45DF011D,AT45DF021D,AT45DF041D,AT45DF081D,AT45DB161D,AT45DF321D,AT45DF641D

EPROM

27C64, 27C128, 27C256, 27C512, 27C010, 27C020, 27C040, 27C1001
M27C1001, M27C2001, M27C4001
27C080 (A19) , M27C801, M87C257
27(C)16, 27(C)32
2764, 27128, 27256, 27512, 27010

EEPROM

28C65,28C64, 28C128, 28C256,28C512, 28C010, 28C020, 28C040
M28C16A/17A (DIP28)
(Adapter or Jumper) 28C16,XLS2816 (DIP24)

FLASH Memory

28F64, 28F128, 28F256, 28F512,28F010, 28F020
MX26C1000, MX26C2000, MX28F1000, MX28F2000
Am28F256A, Am28F512A, Am28F010A, Am28F020A (New command erase/prog.)
-- intel ---
i28F001BX, 28F004, 28F008, 28F016

FLASH Memory

29F64, 29F128,29F256, 29F512,29F010, 29F020, 29F040, 29F080
29F001,29F002, 29F004, 29F008, 29F016, 29F032

Serial (I2C) EEPROM
24Cxx

24C02,24C04,24C08,24C16, 85C72, 85C82, 85C92
--- page write ----
24C32,24C64,24C128,24C256,24C512

Microwire EEPROM

<------ Data 8bit -----> (pin 6 ->ORG. [Schematic connect to GND])
93C06, 93C46, 93LC46, 93C56, 93C57,
93C66, 93C76, 93C86 (8bit), AT59C11, AT59C22, AT59C13
CAT35C102, CAT35C104, CAT35C108 (pullup pin7)
<------Data 16bit------> (pin 6 ->NC [No Connect])
93C06A ,93C46X,93C56,93C66,93C76,93C86 (NS)

MicroChip PIC

16C84 , 16F84 ,16F84A , 16F627/16F628
12C508/A , 12C509/A , 12CE518 , 12CE519 , 16C505
16C620 , 16C621 , 16C622 , 16CE623 , 16CE624 , 16CE625 , 16C710/711
---ICSP connector----(you will need to have an optional PIC adapter in order to program these newly added PICs)
16F870 , 16F871 , 16F872 , 16F873 , 16F874 , 16F876 , 16F877 PIC16F873A , PIC16F874A , PIC16F876A , PIC16F877A
-Add PIC microchip 14bit
PIC12F629 , PIC12F675 , PIC16F630 , PIC16F676 , PIC12F635 , PIC12F683 , PIC16F636 , PIC16F684 , PIC16F688
PIC16F72/73/74/76/77 , PIC16F737/747/767/777 , PIC16F87/88 , rfPIC12F675x , PIC16F785/PS200 , PIC16F716
-Add microchip 14bit,12bit OTP
PIC12C671 , PIC12C672 , PIC12CE673 , PIC12CE674
PIC16C61/71 , PIC16C62/64/65/73 , PIC16C62A/62B/62C/63/63A/64A/65A/65B/66/67
PIC16C72/72A/73A/74A/74B/76/77 , PIC16C620/620A/621/621A/622/622A
PIC16CE/623/624/625 , PIC16C710/711/712/716 , PIC16C773/774 , PIC16C745/765/923/924 , PIC16C925/926
PIC16C554/556/557/558 , PIC16C432/433 , PIC16C717/770/771/781/782
-Add PIC microchip 14bit
PIC12F629/675 , PIC16F630/676 , PIC12F635/683 , PIC16F636/684/688 , PIC16F72/73/74/76/77 , PIC16F737/747/767/777 , PIC16F87/88 , rfPIC12F675x , PIC16F785/PS200 , PIC16F716
-Add microchip 14bit OTP
PIC12C671 , PIC12C672 , PIC12CE673 , PIC12CE674 , PIC16C61/71 , PIC16C62/64/65/73 , PIC16C62A/62B/62C/63/63A/64A/65A/65B/66/67 , PIC16C72/72A/73A/74A/74B/76/77 , PIC16C620/620A/621/621A/622/622A , PIC16CE/623/624/625 , PIC16C710/711/712/716 , PIC16C773/774 , PIC16C745/765/923/924 , PIC16C925/926 , PIC16C554/556/557/558 , PIC16C432/433 , PIC16C717/770/771/781/782
-Add PIC microchip 12bit (FLASH memory)
PIC12F508/509 , PIC10F200/202/204/206 , PIC16F505 , PIC16F54/57
-Add PIC18Fxxx
PIC18F242 , 18F248 , 18F252 , 18F258 , 18F442 , 18F448 , 16F452 , 16F458
PIC18F1220 , 18F2220 , 18F4220 , 18F1320 , 18F2320 , 18F4320
PIC18F6520 , 18F6620 , 18F6720 , 18F8520 , 18F8620 , 18F8720
PIC18F2331 , 18F2431 , 18F4331 , 18F4431
PIC18F6525 , 18F6621 , 18F8525 , 18F8621
PIC18F6585 , 18F6680 , 18F8585 , 18F8680
PIC18F2439 , 18F2539 , 18F4439 , 18F4539
PIC18F6410 , 18F8410 , 18F6490 , 18F8490
Add PIC18Fxxx
PIC18F2410 , PIC18F2420 , PIC18F2455
PIC18F2510 , PIC18F2515 , PIC18F2520 , PIC18F2525 , PIC18F2550 , PIC18F2585
PIC18F2610 , PIC18F2620 , PIC18F2680
PIC18F4410, PIC18F4420 , PIC18F4455
PIC18F4510 , PIC18F4515 , PIC18F4520 , PIC18F4525 , PIC18F4550 , PIC18F4585
PIC18F4610 , PIC18F4620 , PIC18F4680
Add Find and edit value OSCCAL (PIC12F629/675 , PIC16F630/676)
Add Edit config at address 0x2008,0x2009 (PIC12F635/683 , PIC16F636/684/688 , PIC16F785)
Fixed Programming PIC all
Test on chip
PIC12F675 , PIC16F676 , PIC16F684 ,PIC16F767, PIC16F74
PIC16F872 , PIC16F876 , PIC16F877, PIC16F876A, PIC16F873A, PIC16F819
PIC16F84 , PIC16F84A , PIC16F628, PIC16F628A,
eprom PIC12C509JW , PIC16C505JW , PIC16C711JW , PIC16CE625JW
PIC18F458 , PIC18F4320 , PIC18LF258 , PIC18F4539 , PIC18F4431

Atmel Flash Memory
(Sector Programming)
(Software Data Protection)
AT29C256, AT29C512,AT29C010A, AT29C020, AT29C040,AT29C040A
W29EE512,W29EE011, W29EE012, W29C020(128),W29C040
PH29EE010(W29EE011)

ASD AE29F1008 (AT29C010), AE29F2008 (AT29C020)
Ver 0.992 up(DOS). Can run under win9x
(disable prog. CPUIdle or CPUCool)

Atmel Flash Memory
AT49Fxxx (Subset 29Fxxx)
(Byte-by-Byte Programming)
(Software Data Protection)

Command seq. 5555/AA, 2AAA/55, 5555/A0
AT49F512, AT49F010, AT49F020, AT49F040
SST39SF010, SST3S9F020 ,SST39SF040
AT49F001,AT49F002 , AT49F008A

Command seq. 555/AA, 2AA/55, 555/A0
Am29F512, Am29F010, Am29F020, Am29F040,HY29F080
29F002, 29F002T, Pm29F002T

Serial Peripheral Interface (SPI)
EEPROM Mode0 (0,0)
AT25xxx, W95xxx
[Atmel] AT25010,020, 040 (A8-A0)
AT25080, 160, 320, 640, 128, 256 (A15-A0)
[ST] W95010....256, Microchip 25x010 - 25x640

--- Byte programming
25010,25020,25040
--- Page programming
25C080,25C160,25C320,25C640,25C128,25C256,25C512
AT25HP256,AT25HP512
AT25HP1024 (24bit address)

-- CAT64LCxxx (16bit DATA IN/OUT) use Socket 93Cxxx
CAT64LC010, CAT64LC020, CAT64LC040

Atmel EEPROM (page prog.)
(Software Data Protection)

AT28C256, AT28C010, AT28C040

Nonvaltile SRAM (DS12xx)

DS1220,DS1225Y, DS1230Y/AB, DS1245Y/AB, DS1249Y/AB

static RAM (Test RAM)

6116, 6264, 62256, 62512, 628128

EPROM winbond,SST
Electrical Erase Chip

W27E512, W27E010, W27C010, W27C020, W27C040
SST27SF256, SST27SF512, SST27SF010, SST27SF020
MX26C4000
Vcc = 3.3-3.6V SST37VF512, SST37VF010, SST37VF020, SST37VF040

Flash Memory SST,Sanyo

SST28SF040A ,LE28F4001

 



Adapters

Atmel AT89Cxx (MCS-51)
Adapter 32pin to MCS-51

Atmel Auto Setect
AT89C51,52,55, AT89LV51,52,55
AT89S8252 (8K+2K), AT89S53, AT89LS8252,AT89LS53
AT89C1051,AT89C2051,AT89C4051 (20pin)
AT89C51RC (32KB), AT89C55WD (6.2V)
SST89C54/58, SI89C52
Intel Auto Select
i87C51, i87C51FA, i87C51FB
------------------------------------------------
i8xC51,i8xC52,i8xC54,i8xC58 (tWP = 100uS*25 Pulse)

Atmel AVR 8-bit RISC AT90Sxxx
(Parallel programming)
Adapter 32pin to MCS-51

(read,write,erase,verify,checkempty,Lockbits ,Fusebits) [Flash memory/EEPROM]
AT90S1200,AT90S2313
90S2333, 90S4433, 90S4414, 90S8515, 90S4434, 90S8535
reference AT90S2313 pin
Function Lockbitread AT90S2313 Errata Sheet.pdf

MCS-48,MCS-41
Adapter 32pin to MCS-48/41
ROM (read/verify)
P8048AH, P8049AH,P8050AH, P8042AH Vea = 12V
P8041, P8042

OTP (read/verify/Progam)
P8748,P8749H,P8742HVea = 18V

EPROM (read/verify/Progam)
D8748,D8749,D8742,D8741, D8742 Vea = 18V

FLASH memory 8/16bit
(Software Data Protection)
Adapter (TSOP48)

Am29F400,Am29F800,29F160,29F320 (read,write byte mode)
HY29F200, HY29F400, HY29F800 , AT49F2048A, AT49F4096A, AT49F8192A

FLASH memory 8/16bit (Vpp12V)
(Software Data Protection)
Adapter (TSOP48)

i28F200,i28F400,i28F800,i28F160 (TSOP48)
28F001(DIP32 or PLCC32)

EPROM 16bit (DIP40) (1-4Mbit)
Adapter Eprom 16bit
Eprom only

27C1024 (27C210), 27C2048 (27C2002), 27C4096 (27C4002),
Schematic by Toomas Toots
(read,Program byte mode
by use Resister pull up Data Bus (0xFF), A0 select low or high byte)

EPROM 16bit (DIP42) (4-32Mbit)
Adapter Eprom DIP42
Eprom only

M27C400(DIP40), 27C800, 27C160, 27C322
Schematic by Toomas Toots
(read,Program byte mode
by use Resister pull up Data Bus (0xFF), A0 select low or high byte)

FLASH memory 8/16bit
(Software Data Protection)
Adapter (TSOP48LV)

29LV200, 29LV400,29LV800,29LV160,29LV320 (read,write byte mode)

Firmware Hub / LPC FLASH
Adapter Firmware Hub/LPC (PLCC32) (PP mode) (3.3V)
-- Firmware Hub
82802AB, 82802AC, AT49LW040, AT49LW080

SST49LF002A, SST49LF003A, SST49LF004A, SST49LF008A, PMC 49FL008T
W49V002FA, W39V040FA

-- LPC flash
SST49LF020, SST49LF040 W49V002A, W39V040A
WINBOND
W39V040FA, W39V040FAP, W39V040BP, W39V04OBPZ, W49V040FBPZ, W39V040FCP, W39V040FCPZ
W39V080AP, W39V080APZ, W39V080FAP, W39V080FAPZ (Newly added for software 0.98D8)

P28F002BC
Adapter P28F002BC (DIP40)

BOOT BLOCK FLASH MEMORY
- P28F002BC

EPROM Programmer PCB5.0E ( NEW!!! Developed Board (October 2009))

Willem Eprom programmer PCB5.0E can be use for :

. Upgrading, Programming BIOS chip, Repairing PC motherboard BIOS chip.


. VCD, DVD, Color TV, Copier, Fax machine, Printer main board maintaining or reparing.
. Car memory device code reading, writing
. MCU development: programming for MCS-51 series, AVR series and PIC series MCU.
. Programming support for over 1500 IC devices, includes EPROM , EEPROM , FLASH , PIC , AVR , MCS-51 , MCS-48, 27Cxx , 28Cxx 28Fxx , 29Fxx , AT29Cxxx , 24Cxx , 93Cxx , PIC16xxx , DS12xx , AT89Cxx , AT89Cx051 , AT25xxx , AT90Sxxx , EPROM16bit , 29Fx00 , 28Fx00

Hardware Features :
. Support DIP32 to PLCC32 and PLCC Firmware HUB/LPC on board.
. Special PCB4C and PCB4.5C only able to support the chip 29/39/49LVxxx (Low Voltage 3.3V)
. Use power supply from a USB port or DC Adapter (9-12 VDC) by setting jumper.
. Faster than Willem EPROM Programmer PCB3B , PCB3B+ (Standard/Universal) and Enhanced Willem about 50%. It also programs faster than Willem EPROM Programmer (PCB3.5C) , (PCB4C) about 20%. For full capacity, it should be used with with software willem Version 0.98D12 ( bundle in CD-Rom ).
. It can set changes to be PCB3B or PCB4.5C by using jumper setting (when wish use Software of the ordinary)
. The PCB5.0E can unprotect the AM29F040B flash memory chip.
. The back of the circuit board is covered by a plastic board that is neat and protects board from short circuiting. [ see pictures ]

Software Features :
. Windows based programming software support 98 / ME / NT / 2000 / XP
. Latest !! Software willem PCB5.0E version 0.98D12 (Update : 13 September 2010) can run on The hardware PCB3.5/PCB4C/ PCB4.5C only.

. Software willem for PCB5.0E version0.98D12 support for over PICs microchip more than Software 0.97ja.
. Add PIC microchip 12bit (FLASH memory)
PIC12F508/509 , PIC10F200/202/204/206 , PIC16F505 , PIC16F54/57
. Add PIC18Fxxx
PIC18F242 , 18F248 , 18F252 , 18F258 , 18F442 , 18F448 , 16F452 , 16F458
PIC18F1220 , 18F2220 , 18F4220 , 18F1320 , 18F2320 , 18F4320
PIC18F6520 , 18F6620 , 18F6720 , 18F8520 , 18F8620 , 18F8720
PIC18F2331 , 18F2431 , 18F4331 , 18F4431
PIC18F6525 , 18F6621 , 18F8525 , 18F8621
PIC18F6585 , 18F6680 , 18F8585 , 18F8680
PIC18F2439 , 18F2539 , 18F4439 , 18F4539
PIC18F6410 , 18F8410 , 18F6490 , 18F8490
. Add PIC18Fxxx
PIC18F2410 , PIC18F2420 , PIC18F2455
PIC18F2510 , PIC18F2515 , PIC18F2520 , PIC18F2525 , PIC18F2550 , PIC18F2585
PIC18F2610 , PIC18F2620 , PIC18F2680
PIC18F4410, PIC18F4420 , PIC18F4455
PIC18F4510 , PIC18F4515 , PIC18F4520 , PIC18F4525 , PIC18F4550 , PIC18F4585
PIC18F4610 , PIC18F4620 , PIC18F4680
. Add Find and edit value OSCCAL (PIC12F629/675 , PIC16F630/676)
. Add Edit config at address 0x2008,0x2009 (PIC12F635/683 , PIC16F636/684/688 , PIC16F785)
. Fixed Programming PIC all
. Test on chip
PIC12F675 , PIC16F676 , PIC16F684 ,PIC16F767, PIC16F74
PIC16F872 , PIC16F876 , PIC16F877, PIC16F876A, PIC16F873A, PIC16F819
PIC16F84 , PIC16F84A , PIC16F628, PIC16F628A,
eprom PIC12C509JW , PIC16C505JW , PIC16C711JW , PIC16CE625JW
PIC18F458 , PIC18F4320 , PIC18LF258 , PIC18F4539 , PIC18F4431
. Fixed Write/read/verify EEPROM 18F4550
. Fixed Bug program 18Fxxx run on Windows XP/2000 (test PIC18F4539 , PIC18F2680 , PIC18F2431 , PIC18F258 , PIC18F4220 , PIC18F4550)
. Add find OSCCAL 10Fx00, 12F50x, 12F6xx
(test PIC10F202, 12F509, 12F675)
. Fixed Programm AT89C8253 (Want modify Adapter MCS-51) (test on AT89S8253)

. Production control by an engineer who developed "Willem EPROM Programmer Version PCB3b (Standard/Universal) " and developed software Free (Now!! 0.97ja) , 0.97j , 0.97i+ , 0.98i , 0.97i , 0.97h , 0.97g

Payment

1.We only accept payment from PayPal. 

2.Please make sure your eBay address is correct before you pay.

3.All payment Should be Completed within 7 days, or an unpaid disputed will be opened as payment none receive.

4.If you do not want to pay for the order please contact us via eBay message, we will help your cancel the transaction.

Shipping

1. We only ship to confirmed PayPal addresses.
2. Economy Shipping, with no tracking number.
Standard Shipping, with tracking number.
Express (Expedited) Shipping, with tracking number.
3. Economy shipping needs 2-5 weeks to arrive mostly.
In rare case, it can take up to 6-8 weeks.
It depends on your location and local postal service, as well as the weather condition along the shipping.
4. If you need a faster delivery time, you could choose
Express (Expedited) Shipping.
If you need a tracking number, you could choose Standard Shipping.

Return

1. We offer 60 day money back or replacement guarantee.
In addition, it allows customers to return new and unused products in their original factory condition for any reason within 60 days from the date of purchase.
2. Although we test each item and they are packed professionally, few item(less than 0.1%) might be damaged during the shipping. Please feel free to contact us within 4 days after you receive your package about replacement.
3. If you don't receive items over 35days ,please make sure to contact us before leaving any neutral or negative feedback.We'll try our best to help you solve the problem.

If we authorized the return, customers will get an email with instructions for returning the item. Email will be replied within 24 hours on Chinese business hours.

The sole and exclusive maximum liability to lifesteward arising from any product sold on lifesteward ebay account shall be the price of the product ordered.

Feeback

 1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.

 2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.

 3. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.

On Apr 2, 2026 at 20:29:08 PDT, seller added the following information:

Datacaciques