Fitment：

2017-2019 For Nissan Rogue Sport

Item Description：

• 100% Brand new radiator cooling fan blade for Universal use.
• Easy direct installation, require NO modification.
• The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car.
• The radiator fan is using a premium motor that ensures its effective cooling capacity, helping to keep the engine cool and increasing safety.
• The shroud design ensures structural integrity and durability for maximum performance.
• Professional installation is highly recommended.
• 1 Year Warranty for Quality Problems.
• No instruction included.

Replace the radiator & cooling fans：

• Remove front clamshell.
• Drain the coolant and disconnect the feed and return hoses from the radiator。You don't need to drain the whole cooling system, better to just undo the inlet and outlet hoses and catch the coolant in a bucket.
• Release the two fixings securing each water shield to the top rear edge of the radiator mounting panel, and withdraw both shields.
• Release the tie wraps, and unplug the rad. fan harness connector(s).
• Release the single fixing at the bottom of each side extension securing the mounting panel to the bottom flange of the crash structure.
• Release the three fixings securing the back edge of the mounting panel to the vertical flange on the crash structure, and three fixings along the front edge of the panel.
• Release the four fixings securing the radiator to the mounting panel, and withdraw the panel from the radiator.
• Withdraw the radiator and cooling fan assembly. On AC cars, lift the radiator/condenser assembly only sufficiently to release the cooling fans or radiator as required, without disconnecting the refrigerant circuit.
• Release the fan motor from the radiator by removing the four nuts securing the fan shroud to the mounting brackets riveted to the radiator frame. Withdraw the fan harness through the mounting panel grommet.
• Remove the four screws securing the radiator to the mounting panel.
• Refit the radiator in reverse order to removal and refill with coolant and bleed.