DUAL-COLOR AND HI-LO FOG BEAM: You may wonder why we launched the dual beam dual color lights. Most auxiliary lights on the market have only one light pattern for one purpose. But the dual beam dual color lamp not only can replace the weak factory fog lights with the yellow low beam, and the white beam could make up for the stock headlight high beam. One lamp can handle two driving situations and save the budget. Also, it can provide a wide field of view with high-intensity output over an entire 70-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle.

This LED pods are available in both cool white and yellow colors. The white is a 6000K color temperature, which is great for daily use. The yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. Use the custom wire harness to get three light patterns from the MF Series, they are white high beam, yellow low beam and white&yellow beam.

120W/20000LM LIGHT OUTPUT: Provided by a dual-color high-power chip with OBL-MOD (BIFOCAL optical lens), the MF Series shoots an aggressive 20000lmwhite/yellow light output at the power of 120W per set. With the custom-designed TIR optics to guide the light to where you need it, you can get a dual-light dual-color auxiliary light that is 2X brighter than the previous ones and greatly reduce glare. The MF Series is designed to supplement your high beam and fog beam, but it’s great for general illumination as well. People also mount it on their Jeep/truck/ATV/UVT as the ditch light, top rear light, backup light, also auxiliary light on their motorcycle.
 
RELIABILITY&IP68 RATED: You may have experienced the same type from other brands, but burn out soon later. MF Series is the upgrade version, stable operating on the 10-30V vehicle. These light pods have been tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. Each pod has 3 normal wires, you can order the switch&wire with the MF series for better installation. Control the switch to get a separate white high beam and yellow low beam.
 

Come with two bracket options, the motorcycle tubes and black-coated aluminum alloy bottom brackets. These brackets can not only be mounted to multiple locations around your motorcycle, but also fit for different types of Off-Road Jeep SUV ATV UT Truck/Boat.

Feature
Both cool white and yellow colors from each pod
Color Temperature: 6000K/3000K
Custom-designed TIR optics to guide 70° fog high beam and low beam
Aggressive 20000lm/120W light output per set
3mm stainless steel bottom brackets included
Ingress Protection IP68
Can be used as the fog lamp, ditch light, top rear light, and backup light
 
Package including
2pcs Led Light Pods
1 Pair Motorcycle Tubes Brackets
1 Pair of Bottom Brackets and Accessories.
 
 
 
 
 
 
 

DUAL-COLOR AND HI-LO FOG BEAM: You may wonder why we launched the dual beam dual color lights. Most auxiliary lights on the market have only one light pattern for one purpose. But the dual beam dual color lamp not only can replace the weak factory fog lights with the yellow low beam, and the white beam could make up for the stock headlight high beam. One lamp can handle two driving situations and save the budget. Also, it can provide a wide field of view with high-intensity output over an entire 70-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle.

This LED pods are available in both cool white and yellow colors. The white is a 6000K color temperature, which is great for daily use. The yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. Use the custom wire harness to get three light patterns from the MF Series, they are white high beam, yellow low beam and white&yellow beam.

120W/20000LM LIGHT OUTPUT: Provided by a dual-color high-power chip with OBL-MOD (BIFOCAL optical lens), the MF Series shoots an aggressive 20000lmwhite/yellow light output at the power of 120W per set. With the custom-designed TIR optics to guide the light to where you need it, you can get a dual-light dual-color auxiliary light that is 2X brighter than the previous ones and greatly reduce glare. The MF Series is designed to supplement your high beam and fog beam, but it’s great for general illumination as well. People also mount it on their Jeep/truck/ATV/UVT as the ditch light, top rear light, backup light, also auxiliary light on their motorcycle.
 
RELIABILITY&IP68 RATED: You may have experienced the same type from other brands, but burn out soon later. MF Series is the upgrade version, stable operating on the 10-30V vehicle. These light pods have been tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. Each pod has 3 normal wires, you can order the switch&wire with the MF series for better installation. Control the switch to get a separate white high beam and yellow low beam.
 

Come with two bracket options, the motorcycle tubes and black-coated aluminum alloy bottom brackets. These brackets can not only be mounted to multiple locations around your motorcycle, but also fit for different types of Off-Road Jeep SUV ATV UT Truck/Boat.

Feature
Both cool white and yellow colors from each pod
Color Temperature: 6000K/3000K
Custom-designed TIR optics to guide 70° fog high beam and low beam
Aggressive 20000lm/120W light output per set
3mm stainless steel bottom brackets included
Ingress Protection IP68
Can be used as the fog lamp, ditch light, top rear light, and backup light
 
Package including
2pcs Led Light Pods
1 Pair Motorcycle Tubes Brackets
1 Pair of Bottom Brackets and Accessories.
 
 
 
 
 
 
 

DUAL-COLOR AND HI-LO FOG BEAM: You may wonder why we launched the dual beam dual color lights. Most auxiliary lights on the market have only one light pattern for one purpose. But the dual beam dual color lamp not only can replace the weak factory fog lights with the yellow low beam, and the white beam could make up for the stock headlight high beam. One lamp can handle two driving situations and save the budget. Also, it can provide a wide field of view with high-intensity output over an entire 70-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle.

This LED pods are available in both cool white and yellow colors. The white is a 6000K color temperature, which is great for daily use. The yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. Use the custom wire harness to get three light patterns from the MF Series, they are white high beam, yellow low beam and white&yellow beam.

120W/20000LM LIGHT OUTPUT: Provided by a dual-color high-power chip with OBL-MOD (BIFOCAL optical lens), the MF Series shoots an aggressive 20000lmwhite/yellow light output at the power of 120W per set. With the custom-designed TIR optics to guide the light to where you need it, you can get a dual-light dual-color auxiliary light that is 2X brighter than the previous ones and greatly reduce glare. The MF Series is designed to supplement your high beam and fog beam, but it’s great for general illumination as well. People also mount it on their Jeep/truck/ATV/UVT as the ditch light, top rear light, backup light, also auxiliary light on their motorcycle.
 
RELIABILITY&IP68 RATED: You may have experienced the same type from other brands, but burn out soon later. MF Series is the upgrade version, stable operating on the 10-30V vehicle. These light pods have been tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. Each pod has 3 normal wires, you can order the switch&wire with the MF series for better installation. Control the switch to get a separate white high beam and yellow low beam.
 

Come with two bracket options, the motorcycle tubes and black-coated aluminum alloy bottom brackets. These brackets can not only be mounted to multiple locations around your motorcycle, but also fit for different types of Off-Road Jeep SUV ATV UT Truck/Boat.

Feature
Both cool white and yellow colors from each pod
Color Temperature: 6000K/3000K
Custom-designed TIR optics to guide 70° fog high beam and low beam
Aggressive 20000lm/120W light output per set
3mm stainless steel bottom brackets included
Ingress Protection IP68
Can be used as the fog lamp, ditch light, top rear light, and backup light
 
Package including
2pcs Led Light Pods
1 Pair Motorcycle Tubes Brackets
1 Pair of Bottom Brackets and Accessories.
 
 
 
 
 
 
 
 

DUAL-COLOR AND HI-LO FOG BEAM: You may wonder why we launched the dual beam dual color lights. Most auxiliary lights on the market have only one light pattern for one purpose. But the dual beam dual color lamp not only can replace the weak factory fog lights with the yellow low beam, and the white beam could make up for the stock headlight high beam. One lamp can handle two driving situations and save the budget. Also, it can provide a wide field of view with high-intensity output over an entire 70-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle.

This LED pods are available in both cool white and yellow colors. The white is a 6000K color temperature, which is great for daily use. The yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. Use the custom wire harness to get three light patterns from the MF Series, they are white high beam, yellow low beam and white&yellow beam.

120W/20000LM LIGHT OUTPUT: Provided by a dual-color high-power chip with OBL-MOD (BIFOCAL optical lens), the MF Series shoots an aggressive 20000lmwhite/yellow light output at the power of 120W per set. With the custom-designed TIR optics to guide the light to where you need it, you can get a dual-light dual-color auxiliary light that is 2X brighter than the previous ones and greatly reduce glare. The MF Series is designed to supplement your high beam and fog beam, but it’s great for general illumination as well. People also mount it on their Jeep/truck/ATV/UVT as the ditch light, top rear light, backup light, also auxiliary light on their motorcycle.
 
RELIABILITY&IP68 RATED: You may have experienced the same type from other brands, but burn out soon later. MF Series is the upgrade version, stable operating on the 10-30V vehicle. These light pods have been tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. Each pod has 3 normal wires, you can order the switch&wire with the MF series for better installation. Control the switch to get a separate white high beam and yellow low beam.
 

Come with two bracket options, the motorcycle tubes and black-coated aluminum alloy bottom brackets. These brackets can not only be mounted to multiple locations around your motorcycle, but also fit for different types of Off-Road Jeep SUV ATV UT Truck/Boat.

Feature
Both cool white and yellow colors from each pod
Color Temperature: 6000K/3000K
Custom-designed TIR optics to guide 70° fog high beam and low beam
Aggressive 20000lm/120W light output per set
3mm stainless steel bottom brackets included
Ingress Protection IP68
Can be used as the fog lamp, ditch light, top rear light, and backup light
 
Package including
2pcs Led Light Pods
1 Pair Motorcycle Tubes Brackets
1 Pair of Bottom Brackets and Accessories.
 
 

 

 

 

 
 
 
 
 
 
 
 

 

 

PushAuction

Datacaciques