Part Number:

 
PMV-107J 42607-33011 42607-33010 42607-33021 42607-06011  4260733011 4260733010 4260706011 4260733021  PMV107J 42607-0E011 426070E011 42607-35040  4260735040 42607-33022 4260733022 42607-33012 4260733012
 
 
Frequency: 315Mhz
 
 
 
Package Include:
 
 
4 x TPMS(Tire Pressure Monitoring Sensor)
 
 
 
Application:

 

For Lexus:


    2011-2016 Lexus CT200h
    2007-2012 Lexus ES350
    2006 Lexus GS300 (2006 please verify with your VIN)
    2007-2011 Lexus GS350
    2007 Lexus GS430
    2008-2011 Lexus GS460
    2007-2011 Lexus GS450h
    2010-2016 Lexus GX460
    2005-2009 Lexus GX470
    2008-2014 Lexus IS F
    2006-2015 Lexus IS250 (2006 please verify with your VIN)
    2006-2015 Lexus IS350 (2006 please verify with your VIN)
    2007-2012 Lexus LS460L
    2008-2012 Lexus LS600hL
    2004-2007 Lexus LX470
    2008-2015 Lexus LX570
    2006 Lexus RX330 (2006 please verify with your VIN)
    2007-2015 Lexus RX350
    2006-2008 Lexus RX400h (2006 please verify with your VIN)
    2010-2015 Lexus RX450h
    2007-2010 Lexus SC430
 
For Toyota:

    2007-2011 Toyota Camry
    2007-2013 Toyota Corolla 
    2007-2014 Toyota FJ Cruiser
    2008-2013 Toyota Highlander
    2005-2015 Toyota Land Cruiser
    2006-2015 Toyota Prius
    2012-2016 Toyota Prius V
    2012-2015 Toyota Prius Plug-in
    2006-2012 Toyota Rav-4
    2005-2006 Toyota Tundra
    2005-2007 Toyota Sequoia
    2007-2012 Toyota Avalon
    2007-2014 Toyota Matrix
    2007-2008 Toyota Solara
    2006-2015 Toyota Tacoma 
    2009-2015 Toyota Venza
    2009-2012 Toyota Yaris

For Scion:

    2012-2015 Scion iQ
    2008-2015 Scion xB
    2007-2016 Scion tC

    2008-2014 Scion xD

 

Simplified Relearn : Trigger required .

if you can't confirm 100% fit , Pls Send us your VIN or part number(s) .
 
 

Installation Process

 

1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.

5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.