About this item

Main Configuration Updates Based on Autel IM608 Pro:

• 1. Operating system move on to Android 10 from Android 4.4.
• 2. Upgraded 8-core Qualcomm SDM660 8-Core Processor replacing old Exynos T5260 6-Core Processor.
• 3. Doubled RAM & ROM: 4GB/128GB; SD card support up to 64GB (IM608 Pro support max 32GB)
• 4. 16MP Rear camera replacing the previous 8MP one.
• 5. Optimazed newest Software version & More Intuitive Interface.

Conclusion: Thanks to these upgrade, Autel IM608S II fix running latency problem, low response, network unstable problem and other problems that frequently happened in the old IM508/IM608/IM608 Pro. Autel IM608S II not only offers more intuitive naviagtion interface, but aslo enhanced the running & response speed by 5 times.

New Added Functions of Autel IM608S II :

1. Autel IM608S II offers more options for quick vehicle identification such as Scan VIN, Lisence Scan and support more diagnositic protocols such as D-PDU/RP1210, DoIP, CANFD & more, add bulit-in DoIP and CAN FD protocol (don’t need adapters), able to perform quicker and more stable diagnosis on newer vehicle models.
2. Autel IM608S II has been added new functions which can not be achieved with older models such as IMMO Programming for BMW & Benz; Engine ECU Read & Write features wider vehicle coverage, Supports CAN protocol chip read and write without password
3. Support remote expert function.

The included MaxiProgrammer XP400 Pro can extend its capability to the fullest:

• (1) Read transponder data (including Mercedes Benz infrared smart Key ), and generate exclusive Key s.
• (2) Read/write on-board EEPROM chip data, and read/write MCU/ ECU chip data.
• (3) Read/write remote control transponder data and detect Key frequency.
• (4) Read PIN (All Key Lost/Add Key );
• (5) Remote Learning / Key Generation / Key Learning
• (6) For VW/Audi 4th / 5th Generation IMMO Key Learning; For VW MQB Key Learning via OBD; For VW/Audi/BMW Key Unlock
• (7) For Benz 3rd Generation IMMO Add Key , All Key Lost via OBD; For Benz OE NEG Key Learning
• (8) For BMW FEM/BDG Key Learning and Adaptation; For BMW CAS4/3/2 Key Learning; For BMW EWS3 Key Learning
• (9) Backup / Restore IMMO Data; IMMO ECU Reset / Adaption / Refresh / Coding    

Autel IM608S II Key Programming Tool: Do More than You Expected !

Without a programmed transponder Key , you won't be able to start your car. Car Key Programming is an essential procedure that your Key Fob needs to go through in order for it to operate and start the vehicle. To avoid compromised security, broken module, disabled vehicle, and very expensive repairs, you need a professional tool to help you perform Key replacement procedures correctly. Autel Professional Key Programming tool Autel MaixIM IM608S II is a good investment for auto locksmith shops in the long run, not only improve your working efficiency but also bring more business and profit. IM608S II is good solution for:

• Read/Write Transponder Data
• Read/Write MC9S12 Encryption Chip
• Read/Write IC Card
• Read/Write ECU / MCU / EEPROM Data
• Read/Write Mercedes Infrared Key
• Read/Write IC Chip Key s on Hyundai & KIA
• Detect Remote Frequency

Online ECU Coding:

• Directly access to the OEM online coding data of high-end vehicle repair.
• Compatible with BMW, for Benz, for Audi, for Porsche, etc

Note:  ECU Programming & Coding functions are not universally compatible for all vehicles. The specific functions also vary by different car brand, model and year. Please provide VIN for us to check function compatibility.

Autel MaxiIM IM608S II : 40+ Services & Special Functions to Expand Your Business !

Autel Scanner MaxiIM IM608S II is able offers over 40 services function includes commonly used reset & maintenance functions that a DIYer or auto technician would need for everyday car care. Here below are some of the most popular services:

• Oil Reset: Reset the new calculation of Engine Oil Life System for an accurate reading of the next oil change.
• EPB Reset: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.
• BMS Reset: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.
• IMMO / Key Programming : Disable a lost vehicle Key to protect the vehicle from being stolen and add the new Key . (work only on Asian cars that feature low-grade IMMO systemI
• Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.
• ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal.
• SAS Adjustment: Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.
• Throttle Relearn: Reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.
• Headlight Matching: initialize the adaptive headlight system
• ...

More Can be Done After Maintenance / Reset or Component Replacement: initial adaptation, Auto-learning, relearn, auto detection. Such as Crankshaft Sensor Learn and etc.

Note: The above mentioned is just a small portion of all supported services and more are not listed. Please also know that Not All service & Special functions are universally compatible. Please send VIN number and the functions you need to us to check compatibility.

Autel IMKPA

IMKPA is a Key Programming Adapter Kit, compatible with the XP400Pro Key & Chip Pr~grammer. Includes 12 adapters for the XP400Pro that enable Read/Write/Erase for Mercedes Benz ESL_W209 / W906 Data, for Mercedes Benz NEC Key Learning, BMW EWS3 Key Learning and for Volkswagen/AUDI/BMW/Benz Key Unlock. Compatible with the IM608 and IM508 with XP400Pro.