L1800 Print Head Printer Parts UV DTG DTF DFT Original Cabezal 1390 Printhead For Epson L1390 1410 L1400 R1390 R270
Product Information
Tips for Head:
Do not wipe the protective liquid on the nozzle after the nozzle is received. Do not use the syringe to ink the hole. If you have just installed the machine, if there is a missing line, please clean it for 1-2 times. If it is still missing, please do not clean it again. Leave it for 7-8 hours to let the nozzle discharge air and the ink will flow naturally.
1. The machine gives an error (ie, the flashing red light on the boot), not necessarily the sprinkler is broken, maybe the rack or the motherboard has Problem, this situation, please ask the customer to solve the error problem before buying the nozzle.
2. If the motherboard and the nozzle are burnt out, you must first change the motherboard, then check the nozzle!
3. Whether the data line shows signs of cracking, corrosion or burnout, if the data line is broken or not inserted, Will burn the sprinkler and the motherboard, please be sure to check the data head cable!
4. For customers whose machines are too old, such as a lot of ink inside, the machine is very dirty, it is recommended not to change the nozzle It is best to change the machine directly! I don’t have to buy a sprinkler and then put it on. And no repair value!
5. It is recommended that you determine if your ink cartridge or ink or the quality of the supply is good, the one that has been used for a long time. Supply, very dirty supply. A lot of dust and ink are sprinkled everywhere. It is recommended to change a new good quality.The company, this is responsible for me and is responsible for you! Spend a little money to solve big problems! And new supply There is so much ink inside! It’s worth it!
1. The machine gives an error (ie, the flashing red light on the boot), not necessarily the sprinkler is broken, maybe the rack or the motherboard has Problem, this situation, please ask the customer to solve the error problem before buying the nozzle.
2. If the motherboard and the nozzle are burnt out, you must first change the motherboard, then check the nozzle!
3. Whether the data line shows signs of cracking, corrosion or burnout, if the data line is broken or not inserted, Will burn the sprinkler and the motherboard, please be sure to check the data head cable!
4. For customers whose machines are too old, such as a lot of ink inside, the machine is very dirty, it is recommended not to change the nozzle It is best to change the machine directly! I don’t have to buy a sprinkler and then put it on. And no repair value!
5. It is recommended that you determine if your ink cartridge or ink or the quality of the supply is good, the one that has been used for a long time. Supply, very dirty supply. A lot of dust and ink are sprinkled everywhere. It is recommended to change a new good quality.The company, this is responsible for me and is responsible for you! Spend a little money to solve big problems! And new supply There is so much ink inside! It’s worth it!
Products Description
