在售PP2000全芯片：该款PP2000 LEXIA3 为双板金边全芯片，标配Diagbox 7.83，12pcs New NEC Japan Relay and 7pcs Optocouplers ，进口芯片，质量稳定.发货默认为纸盒包装.
跨境包裹参数 普货不带电，尺寸: 25*17*7cm 重量: 850G
PP2000 FULL CHIP Package List:
-----------------------------------------------------分割线，以下为VCX LEXIA PP2000 描述，目前停产................................................
PP2000 Lexia 3 Diagbox 9.85 PSA XS OBD2 Diagnostic Tool
PCB Front and Back Display:
Get Lexia3 Wifi version reasons:
1. Software version Diagbox V9.85
2. Supports Wifi Connect.
LEXIA3 Wifi Version With Power Function:
For programming, diagbox support basic programming, but some programming like car alarm system need account username and password, we don't supply& haven't username and password, only for citroen and for eugeot center repair shop has username and password, please note it.
Lexia 3 PP2000 Software supported language:
English, Chinese, German, French, Japanese, Russian, Arabia, Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia, Thai.
Lexia3 Diagbox Software supported language:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.
Car Model coverage:
1.P2000,Lexia 3 is compatible with most for cars from 1995.
2.PP2000,Lexia-3 is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
C-Zero/ C1/ C2/ C3/ C3 PICASSO/ DS3/ C-ELYSEE/ C4/ C4 CACTUS/ C4 PICASSO/ DS4/ DS 5LS/
C5/ DS5 /C6 / C8/ C-CROSSER/ C4 AIRCROSS/ NEMO/ BERLINGO/ JUMPY/ JUMPER/ AX/ SAXO/
BX/ ZX/ XSARA/ XANTIA/ XM/ EVASION/ C15/ FUKANGFUKANG 988/ ELYSEE/ C-ELYSEE(R3)/ C-
TRIOMPHE/ C-QUATRE
For ：
iON/ 107/ 108 /206 207/ 207+/ 280/ 301/ HOGGAR/ 307/ 308/ RCZ/ 407/ 408/ 508/ 607/ 807/
1007/ 2008/ 3008/ 4007/ 4008/ 5008/ BIPPER/ PARTNER/ EXPERT/ 106/ 205/ 306/ 309/ 405/
406/ 605/ 806
Lexia 3 PP2000 Supported Functions:
1. Read Identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc.
2. Read Fault Codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").Program supports report printing or copy to clipboard.
3. Clear Fault Codes
This function clears all stored fault codes and other diagnostic information.
4. Auto-Scan (Complete Car Scan/Test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator Test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc.)
7. Programming Functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
8. Control Unit
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDDspace and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP withthe latest service pack installed.
Installation Way Tips:
1. PP2000 and lexia software only be installed inXP system 32 bit.Diagbox software only be installed in win7 system 32 bit.
2. Pls don't install lexia and pp2000 software together with Diagbox software in one pc.Diagbox software has included pp2000 and lexia software, Diagbox need be installed in one laptop individually.
3. When installing software, pleaseclose your anti-virus software and firewall.
otherwise the software willbe damaged.
4. Please cut the file "C:AWRoot\bin\fi\APPDIAG.SYS" out before update, and then click update package! After complete update please paste the cutted file back into the previous folder which can avoid activating problem.
Package List:
