T25 T28 Turbo Gt25 Gt28 Gt2871 Gt2860 Turbocharger + Intercooler Piping Pipe Kit
Images
Perfect for all 1.5L-2.0L engine, for all 4 cylinder
Horse Power: Boost Horse Power up to 350BHP
Exhaust Inlet (Turbo Manifold) Flange: Standard T25 Flange
Exhaust Outlet Flange: 5-Bolt
Turbine Trim: 76
Turbine A/R: 0.64
Turbine Inducer Diameter: 53.8mm
Turbine Exducer Diameter: 47mm
Compressor Trim: 48
Compressor A/R: 0.60
Compressor Inducer Diameter: 49.2mm
Compressor Exducer Diameter: 71 mm
Bearing Type: Wet Float
Cooling Type: Water + Oil
Wastegate: with Wastegate
Oil Restrictor: Yes
Oil Restrictor size: inside diameter 2mm
Oil Feed Size: 12mm
Oil Inlet: M12*1.25
Oil Drain Size: 14mm
Oil Outlet: M14 & 2*M8*1.25
Oil Drain Thread Pitch: 40mm
Water Thread Size: M14*1.5
Horse Power: Boost Horse Power up to 350BHP
Warranty: 2 Years for any manufacture defects
Accessories: You will get exactly as shown as picture above
Turbo Intercooler Pipe Application:
Perfect for All Turbo DIY Project
INTERCOOLER PIPING PIPE KIT 2.5"
Destinated for ALL motors, ALL years, ALL architecture vehicle.
Those pipes in aluminium allow you to easily connect your intercooler from the bumper to the engine.
Turbo Intercooler Pipe Specification:
* 2x 90 Degree Aluminum Pipe 2.5"
* 2x Straight aluminum pipe 2.5"
* 2x 135 Degree Aluminum Pipe×2 2.5"
* 2x U Aluminum Pipe×2 2.5"
* 6x Straight Silicon Hose 2.5" (Blue )
* 2x 90 Degree Silicone Hose×2 2.5"(Blue )
* 16x Clamps 2.5"
* Pipe Thickness: 1.8mm
* Pipe length: 18''
* U Pipe distance:150mm
* Package size 44cm*50cm*17cm
* weight:6kg
Turbo Intercooler Pipe Feature:
1. 100% brand new Never been tried or installed.
2. High quality of 6061 Lightweight Aluminum Piping
Polished surface well protected cosmetic surface appearance.
Rolled up end to prevent silicon hoses slip off
Beaded ends: beaded ends available, very convenient for assembly or welding process.
3. Hoses are made of Premium Quality Silicone, with enhanced strength and durability
8*Braided reinforced silicon blue hoses. High grip potential. Good flexibility, extremely resistant to the highest boost pressures.
4.Destinated for ALL motors, ALL years, ALL architecture vehicle.
Those pipes in aluminium allow you to easily connect your intercooler from the bumper to the engine. Perfect for All Turbo DIY Project
5. Increase 65% Air Flow Comparing with other Standard Piping
Product Material
1. Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius
2. Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius
3. compressor wheel/blades: Cast aluminium with good gas tightness and corrosion resistance
4. Capable of Boosting Horse Power up to 350 BHP.
===============================
*Product Features
1. Cost-effective turbo increase 20-40% power for your car
2. Rich experience in turbo production and own factory
3. High-Speed oil seal ring and Precision clearance
4. Built for durability and strength
* Technology Advantage:
1. 100% balancing Test by TURBOTECHNICS VSR3
2. G3-min-Flow VNT Turbo testing
3. Advanced Actuator Tester/Programmer
About Turbo failure
The 6 most common failures are:
1. Oil starvation
2. Oil contamination
3. Impact damage
4. Blocked Engine breather
5. Over speeding of shaft and wheel
Common causes of turbocharger failure:
1. Improper Lubrication / Lack of maintenance
2. Foreign object damageOverspeeding
3. Excessive oil pressure
4. High mileage engine
5. Engine Lacks Power
The following situation indicate the turbo failure:
1. Black Exhaust Smoke
2. Excessive Engine Oil Consumption
3. Blue Exhaust Smoke
4. Turbo Noisy
5. Cyclic sound from turbo
6. Oil Leak from compressor seal
7. Oil Leak from turbine seal
highly suggest you find professional mechanic to help you install it, here are somecheck list before installation.
1. Replace oil supply lines and fittings. These lines often become plugged with decomposed oil which restricts oil flow and drainage.
2. Do not used silicone or thread tape
3. Make sure all openings to turbo are open and not plug or capped off.
4. Shut off fuel or disable ignition and crank the engine for at least 15 seconds or until oil pressure is raised
5. Allow engine to fast idle (1,000 RPM) for 3 - 5 minutes to for Seat turbo seals
6. Always let engine idle for 3 -5 minutes before shut down, otherwise the turbo will continue to spin without oil lubrication and pressure
7.When changing oil, be sure to prime oil filter
Package included
1x Turbocharger
2x Flange gaskets
2x Oil port gaskets
2x Water port gasket
1x Manual
1x Brochure
1x Sticker
2x Gloves
1x Injector
1x Turbo Intercooler Pipe Kit
* Make sure the oil drain line is lower than the turbo itself.
* Gasoline car must install a water cooling device to avoid overheating.
* Ensure exhaust outlet are well sealed by welding
* The degree of modification of the universal turbo depends on your individual vehicle.Professional installation is highly recommended.
* This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order.
* Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)!
* professional tools are nessesary
Other items you might also like
01.Will this fit my car?
We have used the eBay compatibility list as a guide for buyers to use, but the eBay data system is not accurate and incomplete sometimes. Please make sure you have read through the whole listing and paid attention to “note” and “notice”. If there is any uncertain, please use the eBay message to check with our sales first.
02.What payment methods do you accept?
We currently only accept payment via PayPal. You can also use PayPal as a guest and pay using a debit or credit card.
03.When will my order be dispatched?
We will arrange the shipment in 1-3 business day after the payment is cleared. The tracking number will be updated on eBay in 24 hours after the shipment. Please notice that there is no shipment during weekend and holidays.
04.Can I pick it up at the warehouse?
Sorry no. Pick up service is not available.
05.Can I amend my order?
Sorry no. Once the payment is cleared, we cannot amend any item(s), quantities, or add or remove items. We are also unable to change the delivery address. Therefore, please double check all the order information before making payment.
06.What do I do if I have not received my order?
Please simply contact us via eBay messages, and then, we will get back to you as soon as possible with the update. Usually, we will follow up every shipment till customers get their order.
07.What do I do if my product is faulty?
Please simply contact us via eBay messages, and then, we will get back to you as soon as possible. It will speed up the process if you could provide us some pictures or video to illustrate the issue details.
Other items you might also like
Established in 2006, maXpeedingrods has been engaged in the research of over world racing products and culture. It has strong capability of independent research & development, industry-leading capacity of quality control and perfect logistics and after-sales service system.
Racing Team
maXpeedingrods always follow the development concept that “Success derives from devotion and happiness comes from sharing” to make contributes to domestic and overseas car tuning enthusiasts and the global racing culture by excellent products and service.
Partnership
MaXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. We established cooperations with EMtron, Motec, LINK, Cartek, HiM, etc.
Warehouse
MaXpeedingrods owns its warehouses and branch offices in Hongkong, United States, Australia, United Kingdom and Germany.
Other items you might also like
01.
We will ship your order in one business day once the payment is cleared.
02.
All packages will be collected by our courier at 8:00 am BST Monday to Friday.
03.
For payment after 8:00 am BST, the package must be shipped next business day 8:00 am BST.
04.
The tracking number will be entered on eBay within 24 hours after shipment.
05.
We will only ship the item to the shipping address verified by PayPal. Make sure your shipping address is the same with PayPal's.
06.
Import Tax: We do not cover any import duty or tax. The customer should be responsible for the import tax.
07.
We will ship all of our items via DPD and DHL. The estimated delivery time is around 3-6 working days for most areas in Italy.
| FROM | TO | SERVICE | Estimated Delivery Time |
|---|---|---|---|
| Australia | Australia | Toll IPEC or Au PosteParcel | 2-5 business days |
| Outside of Australia | TNT | 4-8 business days |
Other items you might also like
01.
All MaXpeedingrods products have 24 months warranty (unless otherwise stated). All the warranty only covers manufacturing defect(material or workmanship ). Any issue caused by physical damage, incorrect installation and usage, modification, negligence, etc will be out of warranty.
02.
We aim to provide you the good buying experience, 30 days return policy is offered in our store. You may return or exchange any product within 30 days, as long as the item is in resalable condition and is returned in its original packaging. If the product is damaged during or after installation, a refund or credit will not be given. You will be responsible for the original and return shipping charges and a restocking fee of 15%. This also applies to orders cancelled during transit.
03.
The Refund/Exchange will not include postage/eBay costs. There is no problem to return products in terms of unopened, complete, unused. Otherwise, we have the right to refuse the return. Whatever your return reason or exchange is, please contact us for return instruction and return authorization number first; Our customer service team will provide you the professional solution and solve your problem promptly. Our goal is for you to be happy with your purchase.
Other items you might also like