 |
 |
 |
||||
|
||||||
 |
 |
Fits Mori Seiki, Kia
Product description
Taper: CAT 40
Degree: 90
D1 Knob: 0.589"
D2 Neck: 0.392"
D3 Pilot: 0.6360"
L: 2.250"
L1: 0.998"
L2 Shou to End: 1.264"
Knob Socket: RKW40
Quantity: 10 pieces
This pull stud is fit for the following:
TJ Davies PS-532 X 45
Lyndex C40S-4500
Collis 64712
Feature:
1、Using 40cr forging.
2、After carburizing, the outside of material is hardened, and the inside of material is still soft and has enough toughness. Therefore, Material has higher wear resistance and better toughness.
3、CNC on all critical surfaces including a pilotunder the flange of retention knob for full contact between tool holder's taper end and retention knob. Precision grinding pull stubs have higher surface finish and dimension accuracy. The fitting accuracy is obviously higher than that of machine pull stubs, effectively reduces the error of machine tool and cooperation, so as to improve the accuracy and stability of the connection and improves the precision of the machine tools and lengthens the service life
4、Precision grinding pull stubs have higher surface finish and dimension accuracy. The fitting accuracy is obviously higher than that of machine pull stubs, effectively reduces the error of machine tool and cooperation, so as to improve the accuracy and stability of the connection and improves the precision of the machine tools and lengthens the service life.
5、Precision finished on the bottom of the flange to improve fitting with the bottom nose of the taper on the tool holder.High quality black oxide finish can ensure long pull stub life and a non-rusting surface.
10 x CAT40 90° Pull Stud
CCCBD7019
We have other holders & collet chucks & pull stud available at my ebay store! Welcome to the store to watch!
Product description
Taper: CAT 40
Degree: 90
D1 Knob: 0.589"
D2 Neck: 0.392"
D3 Pilot: 0.6360"
L: 2.250"
L1: 0.998"
L2 Shou to End: 1.264"
Knob Socket: RKW40
Quantity: 10 pieces
This pull stud is fit for the following:
TJ Davies PS-532 X 45
Lyndex C40S-4500
Collis 64712
Feature:
1、Using 40cr forging.
2、After carburizing, the outside of material is hardened, and the inside of material is still soft and has enough toughness. Therefore, Material has higher wear resistance and better toughness.
3、CNC on all critical surfaces including a pilotunder the flange of retention knob for full contact between tool holder's taper end and retention knob. Precision grinding pull stubs have higher surface finish and dimension accuracy. The fitting accuracy is obviously higher than that of machine pull stubs, effectively reduces the error of machine tool and cooperation, so as to improve the accuracy and stability of the connection and improves the precision of the machine tools and lengthens the service life
4、Precision grinding pull stubs have higher surface finish and dimension accuracy. The fitting accuracy is obviously higher than that of machine pull stubs, effectively reduces the error of machine tool and cooperation, so as to improve the accuracy and stability of the connection and improves the precision of the machine tools and lengthens the service life.
5、Precision finished on the bottom of the flange to improve fitting with the bottom nose of the taper on the tool holder.High quality black oxide finish can ensure long pull stub life and a non-rusting surface.
10 x CAT40 90° Pull Stud
CCCBD7019
We have other holders & collet chucks & pull stud available at my ebay store! Welcome to the store to watch!
On Mar 18, 2026 at 18:38:59 PDT, seller added the following information: