Vltage Tester Continuity Tester 12V-690V AC/DC Voltage Tester Phase Tester Two-Pole IP65 Waterproof LCD Display Electronic Tester
Description:
- HoldPeak HP-38A voltage test meter screen uses LCD display, the reading is more clear, light and compact, with top lighting.
- This voltage test meter can automatically shut down and can be used to measure current and voltage 12/24/50/120/230/400/690V. This product is highly accurate, safe and easy to use.
- 【Two-pin voltage tester】: HoldPeak AC DC voltage tester can be AC and DC voltage (including three-phase AC current measurement), three-phase AC power display phase, on/off test, continuity test, phase rotation test, polarity detection and self-inspection.
- 【Safety phase tester】: HoldPeak HP-38A voltage tester has a low battery voltage indicator and a voltage display over the measured range, saves energy and is safe to use. Meets safety requirements for double insulation, CAT III 690V, CAT IV 600V and CE.
- 【Easy to use】: Digital LCD display with backlight for easy reading. Non-contact car range voltage tester portable to use.
- 【Measuring range】: HoldPeak HP-38A voltage tester can measure 12-690V AC/DC voltage, accuracy (23±5C): (3%+3) or 5V, range/resolution: 7-690V/1V (auto range)
- 【Use】: this digital phase tester continuity tester measuring device is perfect for home, factory, energy department, foundry, electronics, manufacturing, defense, petroleum, chemical industry, etc.
Specification:
Pen light✔
Low Battery Indication✔
Auto Hold✔
Continuity Test✔
- Phase Rotation Test✔
Auto Power Off✔
Material: ABS
*LED Display Voltage Test:
Voltage Range: 12-690V AC/DC
Rated Voltage Europe: 12/24/50/120/230/400/690V
Tolerance (threshold voltage) Light on at more than: 7 ± 5 V (50 V LED), 18 ± 5 V (24 V LED), 37.5 ± 5 V (50 V LED), 75% ± 5% of rated voltage (120/230/400/ 690V LED)
*LCD Display Voltage Test:
Range/Resolution: 7-690V/1V (Auto-Range)
Accuracy (23±5C): (3%+3) or 5V
Out-of-range indicator: All voltage LEDs light up
Response time: <1s at 90% of each voltage
*High Voltage Display:
Voltage range 50-690 V AC/DC
*Phase rotation test:
System: Three-phase 4-wire system AC
Frequency: 50Hz~60Hz
Phase range: 120 ± 5 degrees
*Continuity test:
Detection Range: 0-550KΩ(±2O0K)
Test Current: Approx. 1.5uA (3V 0Q battery)
*Reference condition:
Battery: 2 * 1 5V (IEC LR03 1 5Vx2)
Temperature: -10~55°C Operating, -20~6O°C (Storage No Condensation)
Humidity: Max. 85% RH
Altitude: up to 2000m
Operating Temperature: -10~55°C / 14~131°F
Operating Humidity: ≤85%RH
Storage Temperature: -20~60°C / -4~140°F
Storage Humidity: ≤85%RH
Power supply: IEC LR03 1.5V*2 (not included)
Item Size: Approx. 25 * 5.5 * 2cm / 9.84 * 2.17 * 0.79in
Precautions:
1 Never take measurements on a circuit where the electrical potential exceeds 690 V. (If the measured voltage exceeds 690V, all voltage LED indicators will light up.)
2 Do not attempt to take measurements in the presence of flammable gases, as the use of the.
3 Never try to use the instrument when the surface of your hands is wet. (Do not use in case of rain.)
4 Keep your hands and fingers behind the barriers during the measurements.
5 Never unlock or open the battery compartment whilst measuring.
6 Verify proper operation from a known source before taking action based on the display.
7 Never attempt to take measurements under abnormal conditions, such as a broken housing or exposed metal parts on the instrument or probes.
8 Do not make any changes to the instrument.
9 Be extremely careful when the circuit LED flashes or lights up.
10 The correct display of the LEDs is only guaranteed within a temperature range of -10°C to 55°C (<85% RH). The instrument can cause sparks that could lead to an explosion.
Package:
1 * HP-38A Pen Type Digital Multimeter
1 * User Manual (English)
Other Details:
