12V Mite Spray Fog Machine with Handle Iron Outdoor Electric Smoke Machine for Mite Bees Removal 250W


Feature:

1. Temperature Controller: With temperature display, heating range of 50 to 400 degrees, manual knob control, convenient to operate, simple to use.
2. Push Rod Switch: Push forward does not let go, the machine stops after a few seconds, the machine stops immediately after the push rod let go, pull back the push rod to reverse, the timer does not work.
3. How to Use: The yellow button can turn the light on and off with one button, a small battery above 12V 20A should be prepared and connected to the fog machine through the power cord for mobile use.
4. Anti Slip: The bottom has a rubber foot mat design, can be placed on the desktop, not easy to tilt upside down and will not scratch the desktop.
5. Portable Handle Design: This 12V fog machine has a portable handle, which makes it easy to carry outside, providing you a great using experience.


Specification:


Item Type: Mite Spray Fog Machine
Material: Iron
Weight: Approx. 2514g/88.7oz
Product Size: Approx. 24.5x11.8x12cm/9.6x4.6x4.7in
Battery (shipped with built in battery): Lithium battery, 1500mAh
Rated Power: DC 12V 250W
Note: Delivery will come with 3 , which can only be started after customers install them upon receipt of the product
Applicable Object: Bee
Use: Cleaning equipment
QA: Wearable parts include clogged heating cores, worn pump head pipes
Cleaning Function:
After using the whole field wait for the machine to drop to near 200 degrees, take the straw out of the medicine pot directly into the cleaning agent bottle before pushing the push rod for more than 15 seconds to complete the cleaning. (When using pure water cleaning temperature must be reduced to below 100 degrees)
Spray Method:
The first use is about 1 second or less, then slowly increase the dosage, the amount of medicine used in each is different, according to the bee colony potential to increase or decrease the number of seconds, the specific operation is as follows.
1. door spray: the weather temperature is low honey bee door does not fan wind, you can spray from the door into. The nozzle does not have to plug into the door, about 1 to 2 cm from the door sprayed into, but also from the side of no bees no door oblique spray into. (Disadvantage: hot bees fan fog is blown out, the effectiveness of the drug decreased by 30% near)
2. Nail eye spray: nail eye spray into the nail eye to ensure that there is no propolis clogging inside the nail eye, if it is a high box group can be in the step box from the queen board near 2 cm drilling, the above nail eye to the side beam can not be on the bee road. The above nail holes should be on the side beams and not on the bee path. (We suggest this method is less wasteful and effective)



Package List:

3 x  Wire

1 x Specification

1 x Mite Spray Fog Machine

1 Cable


Note:

Customers need to purchase the special oil for killing mite (not shipped with)
Note:
1. The machine needs to provide their own 12V (capacity of 20A or more) battery, the estimated spray 200 groups, the power cord can not be extended to use.
2. Not use for a long time, after spraying essential oil can not pull the push rod until a large number of bubbles inside the pot and then push forward for more than 10 seconds.
3. Prohibit the machine high temperature when the water test, shall not use similar diesel oil spray, so as not to cause blockage of the pipeline, to prevent rain into the machine internal damage to electronic components.
4. Each use of attention to the pot suction tube filter is intact, so as not to inhale foreign matter blocking the heating core.
5. Timer less than the scheduled time to stop, immediately hand loose push rod into manual control, so as not to spray more injury bee.