Industrial Door Motor - HayWHNKN
Industrial Door Motor Roller Sub Sliding Up and Over Garage Door Machine 110V
  PreAsion®
Product Overview
The side shaft type industrial door motor is a heavy-duty driving device for overhead doors and sectional doors. It adopts a shaft drive structure and is equipped with a control box, effectively achieving balanced collaboration with the torsional spring balancing system, substantially reducing the motor load and well ensuring the door stops at any position and runs smoothly. The side shaft type industrial door motor can be widely applied to workshops, logistics warehouses, cold chain centers and other scenarios.
Product Parameters
Model INDUS60
Voltage 110V 60Hz
Rated Power 400W
Maximum Loading Door Area 30m2 (35.8sq.yd)
Output Torque 60N.m
No-load Continuous Running Time 15min
Thermal Protection Temperature 120˚C (248˚F)
Reduction Ratio 1:58
No-load Rotation Speed 24r/min
Lubricating System Oil-immersed type
Noise ≤55dB
Manual Chain 360˚ reverse chain
Maximum Limit Travel Output shaft rotates for 20 rounds.
Output Shaft Diameter Φ25.4mm (1in)
Environment Temperature -20˚C~+45˚C (-68˚F~+113˚F)
Working System S2-15min
Protection Class IP54
Net weight 16.6kg (36.6LBs)
Precaution
1. The industrial door operator should be installed and adjusted by professional personnel. Otherwise, serious personal injury or property damage may occur.
2. Installation and wiring must be conducted in accordance with the construction standards and electrical standards. The wire diameter ≧ 1.5mm2, the power source must have reliable grounding, the ground wire must be reliably connected to the place labeled ground tab, the ground lead on the power line is prohibited from being removed, and the front end of incoming power line should be equipped with the electrical leakage protector which is in line with national standards.
3. The industrial door operator is only allowed to be installed on the well-balanced door where the balance spring has been installed, otherwise the machine may be damaged due to overload.
4. The door should be flexible and run without stagnation; the mechanical stop block or buffering booster must be installed at the lead rail end of the door to prevent the door from sliding out.
5. The control box should be installed on the wall or column where the operation of the door can be observed and the height of the control box above the ground is 1.4 meters, so as to prevent children from inadvertently touching. While keeping the remote controllers, prohibit children from touching or playing just in case of danger. Do not use the remote controllers when you cannot see the operation of door.
6. Before repairing and moving the door motor and control box, please cut off the power supply, and make sure that the door has been locked and the risk of falling due to the self weight does not exist.
7. Pedestrians and vehicles are prohibited from going through or stay below the running door.
8. The hand-pulled chain on the machine is prohibited from being pulled during the operation of door machine, so as to to prevent the machine from damage.
9. To ensure the safety of pedestrians and vehicles, please install the infrared protection device and airbag protection device.
10. Relevant safety protection devices and the operation of the door should be checked frequently to ensure the safety and stability of the door.
Product Features & Advantages
Gearbox
Gearbox
The gearbox achieves low-speed high torque through high reduction ratio, meeting lifting demands of heavy industrial doors and adapting to side shaft installation scenarios.
Chain
Manual Chain
Emergency hand-pulled chain for manual door opening, with high tensile strength, anti-aging, non-deformable, easy to operate and control.
Control Panel
Control Panel
Simple structure with convenient operation, precisely controls door opening/closing, improves operation efficiency and reliability.
Emergency Stop Switch
Emergency Stop Switch
Immediate stop in emergency situations, effectively protects operators and equipment, reduces accident risks significantly.
Side Shaft Design
Side Shaft Design
Shaft drive structure collaborates with torsional spring balancing system, reducing motor load and ensuring smooth door operation.
Thermal Protection
Thermal Protection
120°C thermal protection temperature prevents overheating damage, ensures safe continuous operation for 15 minutes under no-load conditions.
Operation Method
1. Check the door.
After the door is installed, adjust the torsion spring, ensure that manually opening or closing the door should be flexible and run without stagnation, observe the direction of rotation of the rope sheave which should be consistent with the direction of opening and closing of industrial door operator.
2. Determine the installation position
Consider the boundary dimension and installation direction of the door machine, determine the position of the mounting bracket, mark the mounting hole position, drill the screw hole and fix the mounting bracket. (The mounting bracket can be fixed inside and outside the door machine, it is recommended to install it on the inner side for convenient disassembly of the door machine).
3. Try to install the industrial door operator
Install a fixing sleeve on the door shaft in advance, and insert the industrial door operator into the door shaft.
4. Pre-fix the industrial door operator.
Fix the industrial door operator on the mounting bracket, and do not tighten the bolts.
5. Align the direction of key slot
Pull the hand-pulled chain up and down to rotate the output shaft of the industrial door operator until the key slot of the output shaft is fully aligned with the key slot of the door shaft. (Note: When releasing the hand-pulled chain, make sure that the hand-pulled chain has been reset successfully.)
6. Mount the flat key and fixing sleeves.
Mount the flat key, keep two fixing sleeves close to the two ends of the output shaft, and fasten the two M8 head screws in the key slot of the door shaft to prevent the flat key from loosening and falling off.
7. Tighten the screws, and prepare wiring and debugging.
Tighten all screws.
8. Conduct wiring operation.
Pull the cable through the waterproof connector on the door machine, and connect it with the wiring terminal inside the industrial door operator according to the instruction of cable markers.
Product Display
Item Included (057298): 1 x Industrial Door Motor 110V
You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
Shipping & Handling Details

Default Shipping Cost or Free Shipping Information:

Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground. Customers from other areas or needs other shipping ways, please contact us.
Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information.
Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.

Handling Time:
Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.

Sales tax / Customs duties:
Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.

Damage In Shipping:
Email or call us First! We will work with you to get the case resolved in the fastest method.

Return / Refund

If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges

All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges
All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.

Defective & Damaged Products

If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.

Payment

eCheck Issues: Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you.

Warranty & Feedback

6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
Any warranty shipping cost to us is responsible by buyer.
Any shipping cost to buyer is responsible by the seller.
We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive feedback as it's very important for us. Thanks very much.

On Mar 13, 2026 at 00:43:52 PDT, seller added the following information:

Datacaciques