• Features:
  •  
  • 1.Fittment: Part Number: K-812. Designed for marine prop shafts from 1-1/4" to 1-1/2", this propeller puller works with 3-blade propellers up to 2-3/8" hub size and 4-blade propellers up to 3-1/8" hub size, with a maximum plate spacing of 6-1/2" to suit a variety of applications.
  •  
  • 2.Material:Built with heavy-duty aluminum pull plates and zinc-plated steel studs, this tool is resistant to corrosion and wear, making it suitable for frequent marine maintenance in harsh environments.
  •  

    • Easy To Carry, Small, Simple, Discrete & Fun

    K-812 Marine Prop Puller Tool For 3 & 4 Blade For 1-1/4" to 1-1/2" Prop Shafts

    Features:

     

    1.Fittment: Part Number: K-812. Designed for marine prop shafts from 1-1/4" to 1-1/2", this propeller puller works with 3-blade propellers up to 2-3/8" hub size and 4-blade propellers up to 3-1/8" hub size, with a maximum plate spacing of 6-1/2" to suit a variety of applications.

     

    2.Material:Built with heavy-duty aluminum pull plates and zinc-plated steel studs, this tool is resistant to corrosion and wear, making it suitable for frequent marine maintenance in harsh environments.

     

    3.Function:The tool applies steady and even pulling force to help loosen tight, rusted, or seated propellers, reducing the risk of bending blades, damaging hub edges, or marking shaft threads during removal .

     

    4.Complete Kit: Supplied as a full prop puller kit with all necessary hardware included, making it a practical tool for routine propeller service, DIY repairs, and professional marine workshops.

     

    5.Simple Installation & Use: Multiple bolt-hole options make positioning easy. Secure the bolts, then tighten them gradually and evenly for smooth removal. A light tap with a rubber or wooden mallet can assist release when required.

     

    Descriptions:

     

    For use on propeller applications using 1-1/4" to 1-1/2" prop shafts;

    Fits for 4 blade propellers with a 3-1/8" or less hub size;

    Fits for 3 blade propellers with a 2-3/8" or less hub size;

    Maximum distance between plates is 6-1/2".

    Using Guides:

     

    Step 1. Features multiple holes on the propeller puller that you can put the bolts through (3-blade propeller mounting 3 bolts, 4-blade propeller mounting 4 bolts);

    Step 2. Insert the bolt straight through the propeller blade and center the pull plate over the propeller shaft;

    Step 3. Once you are satisfied with the position, tighten the bolts evenly, only about a half-turn per bolt to prevent stress from twisting the propeller;

    Step 4. Use a rubber hammer or wooden hammer to tap the rear plate of the propeller puller to help knock the propeller off;

    Step 5. Once the propeller is separated from the shaft, loosen the screw/bolt of the puller tool, remove the puller tool and then remove the propeller from the shaft.

     

    NOTE:

     

    Pay attention to the clearance between the puller’s rear plate and the propeller.

    Do not allow it to get too close to the blades.


    Item Specifics
    Brand :ANNBEY-Auto
    Warranty :1 Year
    Manufacturer Part Number :Does Not Apply
    Type :Marine Boat Prop Puller Tool
    Model :K-812
    Compatible :For 3 & 4 Blade,1-1/4" to 1-1/2" Prop Shafts
    Material :Aluminum pull plates and zinc-plated steel studs

    Payment

    1. Payment Accepted: Payoneer. Allows you to pay by credit card, debit card and your paypal balance.

    2. All major credit cards are accepted through our secure payment processor Payoneer.
    3. We ship items to Your Ebay address.Please make sure your Ebay address is correct before you     pay,cause it cannot be changed once the order sent out.

    1. Payment methods accepted: Paypal only.
     
    2. All major credit cards are accepted through our secure payment processor Paypal.
     
    3. Payment must be received within 7 business days of auction closing.
     
    4. We ship items to Your Paypal address.Please make sure your Paypal address is correct before you pay,cause it cannot be changed once the order sent out.
    Shipping

    1. Item will be shipped within 1-2 business day after your payment cleared.

    2. Delivery time depends on destination and other factors(custom office & natural calamities),please feel free to contact us by ebay message or email if you cannot get your order in time.

    Returns

    1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).

    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.

    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. 

    Customer Services

    Our office hours is as below :

    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
    - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday

    And our office is closed on Sunday and public holidays (Hong Kong)

    We apologize for the late reply during holidays.Please contact us via ebay using"Contact member". We will respond within 24 hours or less. Please include your ebay item numberor order number in all communications.

    Easy To Carry, Small, Simple, Discrete & Fun

    Shop Category
     Store Home
     New Arrivals!
     Tools
     Car Led Light
     Car Rear View Cameras
     Boats Accessories
     Oil Filter Wrench
     Generator Tools Yamaha Honda
     Brake Pads
     Jeep Wrangler JK JL
     Jeep Compass Renegade Patriot
     Jeep Grand Cherokee
     Dodge RAM Challenger Charger
     Ford Mustang
     Chevy Camaro
     Other
    Hot Item
    Picture

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    K-812 Marine Prop Puller Tool For 3 & 4 Blade For 1-1/4" to 1-1/2" Prop Shafts

    Features:

     

    1.Fittment: Part Number: K-812. Designed for marine prop shafts from 1-1/4" to 1-1/2", this propeller puller works with 3-blade propellers up to 2-3/8" hub size and 4-blade propellers up to 3-1/8" hub size, with a maximum plate spacing of 6-1/2" to suit a variety of applications.

     

    2.Material:Built with heavy-duty aluminum pull plates and zinc-plated steel studs, this tool is resistant to corrosion and wear, making it suitable for frequent marine maintenance in harsh environments.

     

    3.Function:The tool applies steady and even pulling force to help loosen tight, rusted, or seated propellers, reducing the risk of bending blades, damaging hub edges, or marking shaft threads during removal .

     

    4.Complete Kit: Supplied as a full prop puller kit with all necessary hardware included, making it a practical tool for routine propeller service, DIY repairs, and professional marine workshops.

     

    5.Simple Installation & Use: Multiple bolt-hole options make positioning easy. Secure the bolts, then tighten them gradually and evenly for smooth removal. A light tap with a rubber or wooden mallet can assist release when required.

     

    Descriptions:

     

    For use on propeller applications using 1-1/4" to 1-1/2" prop shafts;

    Fits for 4 blade propellers with a 3-1/8" or less hub size;

    Fits for 3 blade propellers with a 2-3/8" or less hub size;

    Maximum distance between plates is 6-1/2".

    Using Guides:

     

    Step 1. Features multiple holes on the propeller puller that you can put the bolts through (3-blade propeller mounting 3 bolts, 4-blade propeller mounting 4 bolts);

    Step 2. Insert the bolt straight through the propeller blade and center the pull plate over the propeller shaft;

    Step 3. Once you are satisfied with the position, tighten the bolts evenly, only about a half-turn per bolt to prevent stress from twisting the propeller;

    Step 4. Use a rubber hammer or wooden hammer to tap the rear plate of the propeller puller to help knock the propeller off;

    Step 5. Once the propeller is separated from the shaft, loosen the screw/bolt of the puller tool, remove the puller tool and then remove the propeller from the shaft.

     

    NOTE:

     

    Pay attention to the clearance between the puller’s rear plate and the propeller.

    Do not allow it to get too close to the blades.

    Item Specifics
    Brand :ANNBEY-Auto
    Warranty :1 Year
    Manufacturer Part Number :Does Not Apply
    Type :Marine Boat Prop Puller Tool
    Model :K-812
    Compatible :For 3 & 4 Blade,1-1/4" to 1-1/2" Prop Shafts
    Material :Aluminum pull plates and zinc-plated steel studs


    1. Payment Accepted: Payoneer. Allows you to pay by credit card, debit card and your paypal balance.

    2. All major credit cards are accepted through our secure payment processor Payoneer.
    3. We ship items to Your Ebay address.Please make sure your Ebay address is correct before you     pay,cause it cannot be changed once the order sent out.

    1. Payment methods accepted: Paypal only.
     
    2. All major credit cards are accepted through our secure payment processor Paypal.
     
    3. Payment must be received within 7 business days of auction closing.
     
    4. We ship items to Your Paypal address.Please make sure your Paypal address is correct before you pay,cause it cannot be changed once the order sent out.

    1. Item will be shipped within 1-2 business day after your payment cleared.

    2. Delivery time depends on destination and other factors(custom office & natural calamities),please feel free to contact us by ebay message or email if you cannot get your order in time.

    1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).

    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.

    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. 

    Our office hours is as below :

    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
    - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday

    And our office is closed on Sunday and public holidays (Hong Kong)

    We apologize for the late reply during holidays.Please contact us via ebay using"Contact member". We will respond within 24 hours or less. Please include your ebay item numberor order number in all communications.

    Copyright of annbey-2009. All rights reserved.