307-675 DPS6 Dual Clutch Tool Transmission Installer for Ford Volvo Focus Fiesta

【Application】Widely fit for Volvo Ford Fiesta Focus DPS6 dry transmission, for Ford Mondeo Mk IV 2007-2013, Galaxy 2006-2010, S-Max 2006-2013 plus, for Volvo S60 II, S80 II, XC60, XC70 II, V60, V70 III 2006-2013.

 

【Function】Designed to disassembly and install double clutch dry DPS6 transmission and align the twin-clutch to change the oil seal. Replace OEM 307675, this is a premium quality aftermarket which exceed OEM specification and quality. Install the special tool and compress the input shaft. Turn the threaded bar 20 turns after it makes contact with the input shaft.

 

【Material】Made with heavy-duty steel and sturdy structure which is high hardness and hard to deform, the tool surface is plated with black powder to ensure rust and corrosion resistance. Easy storge with a heavy-duty plastic blow-molded case.

 

【Satisfaction Guarantee】If you're not satisfied with our products, simply return it for a full refund in 60 days. If you have any questions, please feel free to contact us and we will provide the best service.

Removal

 

1. NOTE:Only tighten the bolt finger tight at this stage.

 

2. Using the special tools, turn the center bolt of the special tool with a maximum of 5 Nm (44 lb-in) of torque to push the clutch down to release the pressure from the hollow input shaft snap ring.

 

3.Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.

 

Torque : 44 lb.in (5 Nm)

Removal

 

1. NOTE:Only tighten the bolt finger tight at this stage.

 

2. Using the special tools, turn the center bolt of the special tool with a maximum of 5 Nm (44 lb-in) of torque to push the clutch down to release the pressure from the hollow input shaft snap ring.

 

3.Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.

 

Torque : 44 lb.in (5 Nm)

NOTICE: Make sure the lifting legs are installed on the clutch studs marked with the stamped manufacturing mark as

shown.

 

NOTICE: Installing the lifting legs on unmarked clutch studs will damage the pressure plate adjuster.

 

NOTICE: Make sure the lifting leg with the angle is in the location shown.

 

Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.

 

Turn the center bolt with approximately 5 Nm (44 lb-in) of torque until the clutch is free of the input shaft.

Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.

Torque : 44 lb.in (5 Nm)

 

Installer

Remove special tools.

 

Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.

 

Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.

 

NOTICE: Do not overtighten the special tool or damage can occur.

 

Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.

 

Torque : 44 lb.in (5 Nm)

Package Includes:

  • 1x Fixed Plate, 2x Input Shaft
  • 2x Dust Cover, 3x Round Nuts
  • 1x Electromechanical Unit Sleeve
  • 3x Fixed Remover, 1x Threaded Rod
  • 4x Long Bolts, 2x Short Bolts, 1x Storage Case.

★ Buyers are welcome to use the following payment methods:  payoneer, paypal, credit card, debit cardand many other mothods.

★ After your payment is completed, the item will be shipped from the US warehouse within 1-2 business days.

★ We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address

★ We accept 60 days return guarantee for all Items. If you are unsatisfied with the item, you may send it back within 60 days of receipt, and then you will receive refund.

★ For returns caused by product quality issues, we will bear the cost of the return. For returns for other reasons, return costs may need to be borne by the buyer.

★ All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.

★ It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.

★ Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return.

★ Welcome to leave your positive feedback, it will help other customers have a better shopping experience.
 
★ Please contact me before leaving neutral or negative feedback. Our customer service representative will do our best to solve the problem for you, thank you!

★ We will reply your message within 24 hours Mon-Sat, and 48 hours on Sunday.

PushAuction