Anticarbon engine piston ring decoking agent (gasoline, diesel).

Fast-acting agent for decoking of piston rings of gasoline and diesel engines that have become stuck. It is recommended to use after engine overheating, with increased oil consumption, smoke.

Returns mobility to the rings.

Reduces oil consumption.

Cleans cylinders and pistons, combustion chambers, valves from all types of contaminants (soot, coke, varnishes, resins).

Equalizes compression in the cylinders.

Reduces the level of harmful exhaust emissions.

It is recommended to use after engine overheating, with increased oil consumption, "smoke".

Decoking agent for Verylube engines application:

Warm up the engine.

The engine should be warm, but not hot.

Unscrew the spark plugs (injectors).

Disconnect the ignition distribution sensor connector, Hall sensor or switch.

Pour about 60 ml of the product (1/4 bottle) into each cylinder through the spark plug hole.

One package (250 ml) is enough to de-coke 4 cylinders.

Screw the spark plugs back in.

Wait 60 minutes.

Unscrew the spark plugs.

Cover the spark plug holes with an absorbent cloth so that the dirt that flies out does not get on the paint.

Crank the engine with the starter for a few seconds.

Install the spark plugs (injectors) in place.

Start the engine and ensure its operation at an increased crankshaft speed for up to 15 minutes.

During this time, the remains of softened coke will be removed through the exhaust gas exhaust system.

Replace the engine oil.