Model: SS-150VA-56*
Description: 150W LED Driver
Rev.: V04
Release Date: 2020-03-23
SS-150VA Series LED Driver
SOSEN
LED DRIVER
VA Series
Features:
Efficiency up to 93%
Isolated dimming:1-10V,PWM,Resistor,Timing IP67
Protections: SCP/OTP/OVP/OPP
Class P
TYPE HL, suitable for hazardous locations Surge protection: L/N-PE: 10kV, L-N: 6kV Warranty: 5 years
05
IP67
R
E360758
Class P
Description：
SS-150VA is a rectangular driver with 90-305Vac input, the 150W model are designed for street and area lights with IP67 and 10kV/6kV surge protection. It has UL listed mark with Class P and Type HL rated.
Model List:
Model | AC Input Range | Max. Pout | Vout Range | Full Power Vo Range | Iout | THD(Typ.) | PF(Typ.) | Eff.(Typ.) | Max.Tc |
SS-150VA-56* | 90-305Vac | 150W | 22-56V | 36-56V | 2.1-4.2A | 8% | 0.98 | 93% | 90℃ |
Default tested at 220Vac, full load, Ta 25℃。
“*”Optional B or space in the place of * means additional function.
Space is the base model without any optional function;
Suffix B for model with 3-in-1 dimming (1-10V, PWM, Resistor);
Suffix T for model with Timing.
SS-150VA Series LED Driver
Input Characteristics:
Parameter | Min. | Typ. | Max. | Remark |
Rated AC Input Range | 100Vac | 277Vac | ||
AC Input Range | 90Vac | 305Vac | ||
Input Frequency Range | 47Hz | 50/60Hz | 63Hz | |
Max Input Current | 1.8A | 100Vac, Full load | ||
Max Input Power | 170W | 100Vac, Full load | ||
Max Inrush Current(120Vac) | 60A | Cold start | ||
Max Inrush Current(220Vac) | 110A | Cold start | ||
Max Inrush Current(277Vac) | 125A | Cold start | ||
No Load Power | 3W | 220Vac/50Hz, No load | ||
Power Factor | 0.95 | 0.98 | 220Vac/50Hz, Full load | |
0.90 | 100-277Vac/50Hz, 70-100% load | |||
THD | 8% | 10% | 220Vac/50Hz, Full load | |
20% | 100-277Vac/50Hz, 70-100% load |
Output Characteristics:
Parameter | Min. | Typ. | Max. | Remark |
Output Voltage Range | 22V | 56V | Power derated @22-36V | |
Rated Output Voltage | 36V | 56V | Po=Vo*Io=150W, Full load | |
Rated Output Current | 2.7A | 4.2A | 4.2A for 36V,2.7A for 56V | |
Current Adjustable Range(AOC) | 2.1A | 4.2A | ||
No Load Voltage | 60V | |||
Efficiency @120Vac | 90.0% | 91.0% | Output 42V/3.6A | |
Efficiency @220Vac | 92.0% | 93.0% | Output 42V/3.6A | |
Efficiency @277Vac | 92.5% | 93.5% | Output 42V/3.6A | |
Output Current Tolerance | -5% | +5% | ||
Output Current Ripple(PK-AV) | 5% | 10% | Full load | |
Start-up Current Overshoot | 10% | Full load | ||
Start-up Time | 0.5S | 120Vac | ||
0.5S | 220Vac | |||
Line Regulation | -2% | +2% | Full load | |
Load Regulation | -2% | +2% | ||
Temperature Coefficient | -0.03%/℃ | +0.03%/℃ | Tc:0℃~90℃ | |
OTP | 90℃ | 100℃ | 110℃ | Tc, Decreases output current, returning to normal after over temperature is removed. |
Short Circuit Protection | 15W | Driver will not be damaged, Hiccup mode |
Other Characteristics:
Parameter | Min. | Typ. | Max. | Remark |
1-10V Dimming (Optional) | Dim Vmax | 0V | 12V | ||
Dim Range | 10%Iomax | 100%Ioset | |||
Rec.Dim Range | 1V | 10V | |||
PWM Dimming (Optional) | PWM High | 9.8V | 10.2V | ||
PWM Low | 0V | 0.3V | |||
Frequency | 1KHz | 2KHz | |||
PWM Duty | 10% | 100% | |||
Resistor Dimming (Optional) | Resistance | 10Kohm | 100Kohm | ||
Dim Range | 10%Iomax | 100%Ioset | |||
Timing Curve(Optional) | By programming | Set by program (Externally programmable) | |||
Lifetime(Tc≤74℃) | ≥62,000 hours | 80% load | |||
MTBF | 205,000 hours | 220Vac,Full load, Ta=25℃ (MIL-HDBK-217F) | |||
IP Grade | IP67 | ||||
Tc | 90℃ | ||||
Warranty | 5 years | Refer to life time drawing | |||
Net Weight | 960g | ||||
Dimension | 201mm*71mm*39.6mm | L x W x H | |||
NOTE: All the parameters above are tested Ta 25℃, unless specified.
Environmental Requirements
Parameter | Min. | Typ. | Max. | Remark |
Operating Temperature(Tcase) | -40℃ | 25℃ | +90℃ | |
Storage Temperature | -40℃ | 25℃ | +85℃ | |
Operation Humidity | 10%RH | 90%RH | ||
Storage Humidity | 5%RH | 95%RH | ||
Altitude | -65m | 4000m |
Safety and EMI/EMS Standards
Certification | Standard | Status | Remark |
UL/cUL | UL8750 | ||
ENEC | IEC 61347-2-13:2014/AMD1:2016 used in conjunction with IEC 61347-1:2015 | ||
RCM | AS/NZS61347.2.13 | ||
CCC | GB 19510.14-2009 | ||
CE | EN 61347-2-13:2014 EN61347-1:2008+A1:2011+A2:2013 |
EMI/EMS | Criterion | Remark |
Conduction Emission | EN55015:2013+A1:2015 | |
Radiation Emission | EN55015:2013+A1:2015 | |
Harmonic Current Emissions | IEC/EN 61000-3-2 | Class C |
Surge | IEC/EN61000-4-5 | Difference mode 6kV, Common mode 10kV,Criterion B |
Ring Wave | IEC/EN 61000-4-12 | Difference mode 6kV, Common mode 6kV,Criterion B |
Safety Test Items:
Safety test items | Technical Indicators | Remark | ||
Insulation Requirements | UL Insulation Requirements | TUV Insulation Requirements | CCC Insulation Requirements | |
Input-Output | 1600Vac | 3000Vac | 3750Vac | Reinforced insulation |
Input-Case | 1600Vac | 1500Vac | 1875Vac | Basic insulation |
Input-Dim | 1600Vac | 3000Vac | 3750Vac | Reinforced insulation |
Output-Dim | 1600Vac | 1000Vac | 1000Vac | Additional insulation |
Output-Case | 500Vac | 1000Vac | 1000Vac | Function insulation |
Dim-Case | 500Vac | 250Vac | 500Vac | |
Insulation Resistance | ≥10MΩ | Input-Output,Test voltage:500Vdc | ||
Ground Resistance | ≤0.1Ω | 25A/1min | ||
Leak Current | ≤0.75mA | 277Vac | ||
NOTE:
SOSEN warrants the LED Driver itself meets with EMC standard. However, LED Driver's EMC should be re-checked when integrated into lighting systems due to unexpected interference as component.
Please short Line and Neutral, LED+ and LED-, Dim+ and Dim - when Hi-pot test.
The CCC withstand voltage test needs to disconnect the built- in lightning protection tube. According
to the IEC 60598-1:14 standard section 10.2, the “built-in lightning protection tube” can be marked on the nameplate to disconnect the discharge tube on testing.
Performance Curves:
Ipeak
50% Ipeak
Twidth
10% Ipeak
Twidth
Input Inrush Current
Vin | Ipeak | T(@10% of Ipeak) | T(@50% of Ipeak) |
120Vac | 60A | 120uS | |
220Vac | 110A | 150uS | |
277Vac | 125A | 200uS | |