Battery installation
Arm Battery: Purchase 4 AA batteries by yourself, remove the battery compartment from the corresponding position on the arm, install and return to its original position
Controller Battery: Purchase 2 AAA batteries and install them in the controller battery compartment
Remote control button instructions
Indicator light: displays the working status of the device
Switch/Sound Effect: Short press to turn on, short press again to turn off
Light effect switch: Short press to turn on the light effect, short press again to turn off
Sound effect switch: Short press to turn on the sound effect, short press again to turn off
Palm Cannon Function
Short press: turn on the light effect, short press again to turn off
Medium long press: accompanied by sound and light effects, emission effects appear and automatically turn off
Long press: accompanied by sound and light effects, emission effects appear and automatically turn off
touch control
Left touch area: Touch to turn on/off individual finger armor
Right touch area: Touch to turn on/off the entire palm armor
Palm Cannon LED: Touch to control the palm cannon light effect switch.
Do you want to have a more intuitive understanding of the operational logic? I will organize a functional operation flowchart and send it to you to help you quickly get started with this equipment?
This is the second part of the user manual for Spark Studio MARK V Wearable Armband Set, which includes the following text information:
Wearing Steps
Put on the matching gloves first
Open the top back cover of the armor palm
Insert the armor from the elbow position of the arm, place the palm inside the hand armor, and finally cover the back cover. Adjust to the appropriate position to complete the wearing process
voice control
Chinese instruction set
Wake up password: Jarvis
Close the arm (linkage password: lock mask)
Explosive armor mode (linkage password: open mask)
Release armor (linkage password: close mask)
Activate combat mode (linkage password: enter combat mode)
Release Combat Mode (Linkage Password: Release Combat Mode)
English instruction set
Wake up password: Jarvis
Open the arm (linked command: Section the mask)
Close the arm (linked command: Lock the mask)
Full open (linked command: Open the mask)
Close all (linked command: Close the mask)
Switch to battle mode
Dismiss battle mode
Note: The above command set supports linkage with MK5 helmet
Safety operation warning
If the product has not been used for a long time, please remove the battery; If there is a malfunction or abnormal movement in the operation, and there is external force hindering the movement of the arm, and there is no movement for a long time after wearing it, please use voice to wake up the arm again.
Fault Analysis
If there is an operational malfunction or abnormal action, you can first check the battery level. If the battery level is sufficient but there is still no response, you can try reinstalling the battery or checking if the device connection is normal.
If you need me to help you organize a clearer operation guide or have any other related needs, please let me know~
MK5 Iron Man Helmet
Material: Plastic ABS
Height: 62 cm / 24.4 In'
Item needs AA（1.5v）battery *4、AAA battery *2 (Without battery, the battery cannot be sent internationally )
Note: If the AA battery power is lower than 1.5V, it may lead to slow response of the helmet, poor eyes and other problems.
Helmet can be controlled by voice like the instructions below
Size :Wearable within 60cm head circumference
1. Three Control Models:
*Touch Control:
Touch The Sensing Area Of The Right Ear: Control The Mask Multi-chip Open/close
Touch The Left Ear Sensing Area: Control The Mask To Open/close
* The Operation Function Of Remote Control:
A Control Mask Integral Open/close
B Control Mask Multi-chip Open/close
C Limit Switch Color.
D Eye Light On/off
E Helmet Sound On/off
* Voice Control: English Voice Commands
Before Operating The Command, You Need To Execute The Jarvis/jarvis" Wake Up System.
To Proceed With The Subsequent Command Operation. Within 5 Seconds Of Waking Up The System.
Can Continuously Input Voice Operation Commands.
Failure Analysis
- If The Matching Password Fails, Try To Match The Password Again After Charging The Force Control.
- The Eye Lights Flickered Slowly, The Motion Was Slow, The Sound Was Blurry, And The Battery Was Low, A New Battery Should Be Replaced
- Operation Failure, Abnormal Situation, Restart The System.
- Wear Helmet, Automatically Detect Failure And Restart The System.
Safety Operation Warning
- Notes For Starting: Before Starting The Helmet (or When Restarting The System Power)
- It Is Necessary To Ensure That The Mask Is Closed Smoothly Before Starting Up, Such As The Existing Part Of The Mask
- When All Parts Are Open, All Parts Need To Be Closed Manually Gently To Ensure That The Surface Is Not Stable
- Turn Off And On Again. When The Product Is Not In Use For A Long Time, Please Remove The Dry Battery.
- It Is Strictly Forbidden To Play With The Mask Opened By Manual External Force Flap. Corpse Is Forbidden When The Helmet Is Opened And Closed.
- An External Force Impedes Movement, Causing Different Damage To The Opponent.
- Non-professionals, Do Not Disassemble The Product By Yourself.
Battery Case And Wearing Instructions
- The Battery Case Is Hidden On The Back Of The Black Pad On The Back Cover
- Please Take Off The Back Cover Before Wearing
- Wear A Head Circumference Of 60cm And Bring Your Own Helmet Battery
- Remove The Back Cover Before Wearing The Helmet
-install The Back Cover After Wearing It
- Four AA（1.5v） Batteries
- Remote Control Battery: AAA Battery
