Full System Bi-directional Control Test/ Active Test
V3 Elite allows you to use the scan tool temporarily activate or control a vehicle system or component and to check of the electronic components such as switches, sensors, relays, and actuators.
and supports the most commonly required service and coding features.

●Auto Bleed Test/ Automated Bleed
●ABS Pump Motor Test
●Fuel Injector Pump/ Fuel Trim Reset
●Window/Mirror/ Door Lock/ Horn
●Cycle A/C Clutch On/Off
●Air Conditioning Test
●Wiper Test
●Interior & exterior lights Test
●Sound horn Test
●Brake Bleed Preparation Test + ABS Manual Control Tests + Fuel ●Composition Reset + EVAP Test + Idle Relearn + Injector Buzz Test + Pump and Value Tests + VGT Turbo Calibration......

Advanced ECU Coding
Restore Functional Status after Repair or Replacement
After making repairs or replacements, you can use this bi-directional diagnostic scanner to re-flash the vehicle control modules, clear the original memories stored in Electronic Control Unit, and write the adaptive data into specific components to get your vehicle back on the right track.

Customize and Upgrade Vehicle in Your Own Way
You can also make manual tuning to break the limitations and restrictions of the market-specific settings of the car when it left the factory. With the help of this scan tool’s online coding, you can disable annoying functions or activate high-end features, make software modifications to alter how it behaves originally. Here are some examples:
- Disable the automatic start/stop. So when you press down the accelerator pedal/brake pedal, your car won’t automatically start/stop.
- FCA vehicle’s car doors can be unlocked with just one press of the key fob.
- Make the moving pointer move, perform self check, and then return to the initial point at the time the ignition is turned on.
- The fuel gauge can show the real-time filling quantity of fuel in the tank.
- The car lock sound effect will be available at the time the car is locked.
- Use the key fob to make all car windows automatically closed with just one press of the lock button.
- Keep the daytime driving lights lighted on for 20 seconds.
- When you press the brake pedal, your stoplights can be all lighted up.
- Your turn signals & rear fog lights can be alternatively flashing.

40+Reset Function 
1. Injector Coding
Write the new injector code into the car system for the correct cylinder injection quantity.

2. DPF Regeneration
Especially works for D-P-F system with D-P-F regeneration, D-P-F component replacement teach-in and D-P-F teach-in after replacing the engine control unit.

3. ABS Bleeding
Help exhaust the air after repair the ABS pump system.

4. Throttle Matching
Initialize the throttle actuators to the default state.

5. TPMS Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

6. Battery Reset
Register the battery after replacement.

7. Seat Calibration
Calibrate the memory in replaced or repaired seats.

8. Oil Reset
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

9. Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.

10.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
.........

Comprehensive OE-Level All System & All Control Modules Diagnosis
V3 Elite is a professional automotive scanner for enthusiasts, independent repairs, specialized garages and technicians. Quick scan performs an automatic system test to determine which control modules are installed on the vehicle and provides diagnostic trouble codes overview.

●Auto VIN: Identify the vehicle information automatically and enter into diagnostic modules（Note: Some vehicles does not support auto vin functions, so you can type it in.）
●Read Codes: Scan the control modules and point out the potential car error faults which you have no idea when the warning light on the dashboard.
●Clear Codes: Guide you to figure out the car issues and clear the error codes after maintenance services.
●Live Data: Show live sensors data in text and graph and allow you to view two graphs simultaneously and merge them in one graph to compare.
●Turn Off MIL: After reapiring the car faults and clearing the car error codes, the Malfunction Indicator Lamp will turn off. 

 OBDII Code Reader Fit for all car
●Reading Codes: Present some diagnostic trouble codes after scanning the vehicle.
●Reseting Codes: Clear the fault codes after doing the repair according to the prompt of the scanner.
●Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
●Freeze Frame: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
●On-Board Monitor Test: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
●O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results Fit for the most recently performed tests from the vehicls 
●onboard computer. (Note:If the vehicle uses a controller area network (CAN) protocol to communicate, this function is not supported by vehicle)
●On-Board Monitor Test: Retrieves and displays test results Fit for emission-related powertrain components and systems.
●Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
●I/M Readiness Shows whether the various emissions-related systems on the vehicle are operating properly and are ready Fit for inspection and maintenance testing.

Technical Specifications
Processor：A133 ARM Cortex-A53,Quad Core at 1.5 Ghz
GPU：IMG PowerVR GE8300
Operating System：Android 10
Memory：2GB LPDDR4 RAM & 32GB EMMC ROM
Display：5.5 inch IPS Multi-touch Capacitive Touch Screen with 1280*720 resolution
Connectivity：Wi-Fi : 802.11 b/g/n/ac Support Hot spot/ 2.4/5GHz
💹Bluetooth: 5.0
💹Type-C
Audio Input/Output    
💹Input: N/A
💹Output: buzzer
Input Voltage：8V – 30 V
Power Consumption：Approx. 800 mA (Screen on with default brightness, Wi-Fi on) @3.7 V
Operating Temp：-10 to 50 °C (14 to 122 °F)
Storage Temp：-20 to 60 °C (-4 to 140 °F)
Operating Humidity    ：5% to 95% non-condensing
Dimensions ：(W x H x D)    201 mm(7.91 in) x 118 mm(4.65 in) x 34 mm(1.34 in)
Weight：NW: 370 g (0.82 lb)
Protocols：ISO9141-2, ISO14230-2, ISO15765, K/L-Line,  SAE-J1850 VPW,SAE-J1850PWM, ISO11898 (High-speed,Middle-speed, Low-speed and Single-wire CAN, fault-tolerant CAN), SAE J2610, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6, SAE J1939, SAE J1708

Supports Multi-language
Korea, Spanish, Portuguese, French,Swedish, English, Dutch, Japanese, Italian, German,Russian, Hungarian, Greek
Note: English&Spanish is default language, if you need other language, please contact seller.

How To Update It?
1.Ensure the tablet is connected to a power source and has a stable Internet connection.
2.Tap the Update application button from the Ancel APP homepage. The Update application screen displays.
3.On the Update screen, tap the all select button  to select all available software version, then tap the update button  to update all select software version.
4.When the updating process is completed, the software will be installed automatically. The previous version will be replaced.

ANCEL V3 Elite Package list
V3 Elite for BMW main unit
Diagnostic Cable
USB TYPE C Cable
Quick Start Guide
User’s Manual