Title
6Pcs Steering Inner Tie Rod End Set Fit For Toyota Hilux 4WD GGN25R KUN26R 05-On

6Pcs Steering Inner Tie Rod End Set Fit For Toyota Hilux 4WD GGN25R KUN26R 05-On

 

Product Name
Inner Rack Tie Rod End Kit

Product Overview
This inner rack tie rod end kit is designed as a direct replacement for selected Toyota Hilux steering systems. The package includes inner rack ends, rack boots, and outer tie rod ends to help restore precise steering control, reduce abnormal play, and maintain correct wheel alignment for long-term driving safety and stability.

Specifications
Type: Inner Rack Tie Rod End
Placement on Vehicle: Front
Position: Left or Right
Length: 310mm
Male End Thread: M15 x 1.5mm
Socket End Thread: M14 x 1.5mm
Cone Size: 15.2mm
Mounting Length: 83.0mm
Thread (Cone Out): M14 x 1.5
Thread (In/Out): M14 x 1.5 RH
Warranty: Lifetime

Compatible With
Compatible With Toyota Hilux 4WD GGN25R 2005-on
Compatible With Toyota Hilux 4WD KUN26R 2005-on

Product Features
A worn inner rack tie rod end can cause noticeable steering looseness, where the steering wheel develops excessive play and requires more input before the vehicle responds. This condition often affects straight-line driving and lane changes, reducing overall steering precision and driver confidence.

Uneven tire wear is another common symptom, as a failing inner rack tie rod end may no longer maintain correct toe alignment. This can result in accelerated wear on the inner or outer edges of the tires, increasing replacement costs and reducing tire lifespan.

Steering wheel vibration or shimmying may occur, especially at higher speeds, due to inconsistent steering feedback caused by internal joint wear. These vibrations can be felt through the steering wheel and sometimes throughout the vehicle chassis.

Knocking or clunking noises may be heard when driving over bumps or uneven road surfaces. This noise typically indicates excessive internal play within the ball joint, suggesting that the inner rack tie rod end is no longer securely controlling steering movement.

Vehicle pulling or drifting to one side during driving, acceleration, or braking can also signal inner rack tie rod end wear. This is often linked to misalignment issues caused by reduced structural integrity of the steering linkage.

In advanced cases, steering effort may increase, particularly at low speeds or during tight turns, making the vehicle harder to control. Grease or fluid leakage from a damaged boot can further indicate seal failure and internal wear, which should be addressed promptly to avoid damage to the steering rack.

Package Include
2 x Rack Ends
2 x Rack Boots
2 x Outer Tie Rod Ends

Product Usage Instructions
Inspect the steering system and remove the worn inner rack tie rod end, rack boot, and outer tie rod end from the steering rack. Install the new components following the original orientation and torque specifications. After installation, a professional wheel alignment is strongly recommended to ensure correct steering geometry and even tire wear. Regular inspection of steering components is advised to maintain safe driving performance.

PushAuction