🎮 DJI RC-N1 Remote Controller (RC231)
✅ Compatible Product
-
DJI Mavic 3 / Mavic 3 Classic / Mavic 3 Pro / Mavic 3 Pro Cine ✅ (O3+)
-
DJI Mini 3 / Mini 2 / Mini 2 SE / Mini 4K ✅ (O2)
❌ DJI Air 3 / Air 3S / Mini 4 Pro / Mini 5 Pro / Neo / Neo 2 / Flip / Avata / FPV — O4/O4+ aircraft, cannot pair with RC-N1
⚠️ No built-in screen — requires phone + DJI Fly
⚠️ Transmission auto-matches aircraft: O2 / O3 / O3+ only
📦 Package Contents
-
1 × DJI RC-N1 Remote Controller (RC231)
-
1 × Remote Controller Cable(shipped at random: USB-C / Lightning / Micro-USB)
Charger not included
🔍 Product Overview
The DJI RC-N1 (RC231) is the classic no-screen phone-clamp remote for DJI’s O2/O3/O3+ consumer drones. Clip a phone on top, run DJI Fly, and get physical flight/camera controls: gimbal dial, shutter/record, mode switch, smart RTH, pause, custom FN. Detachable sticks stow in the body, dual antennas flip out, and the remote can trickle-charge the phone while flying. It is the correct replacement remote for Mini 2 / Air 2S / Mavic 3 owners — not for any O4 drone.
✨ Key Features
-
📱 Phone cradle: max 180 × 86 × 10 mm
-
🎛️ Physical controls: gimbal dial, shutter/record, RTH, pause, mode, FN
-
🔋 Internal Li-ion: ~6h no phone charge / ~4h with phone charging
-
🧲 Detachable sticks with body storage slot
-
📡 Dual-band: 2.4GHz + 5.8GHz, dual-antenna
-
🔌 USB-C port: charging + computer parameter/firmware via DJI Assistant 2 / Fly
-
📶 Auto transmission: O2 / O3 / O3+ by aircraft
⚙️ Technical Specifications
💡 Usage Tips
-
Pair in DJI Fly: power aircraft + RC-N1 → Connection Guide → select model → firmware switches transmission profile.
-
Mavic 3 = O3+ 1080p/60fps; Air 2S = O3; Mini 2 / Air 2 / Mini 3 = O2.
-
Don’t rely on phone charging for all-day shoots — carry a power bank.
⚠️ Important Notes
-
No O4 / O4+ — will NOT pair with Air 3, Air 3S, Mini 4 Pro, Mini 5 Pro, Neo, Neo 2, Flip, Avata, FPV
-
No screen — dead phone = no live view
-
Range/EIRP region-locked — CE/SRRC/MIC lower than FCC
-
6h / 4h are lab figures — cold weather and phone charging cut real runtime