Fa. Designholz HH Quilted Wood Veneer Sheet Brown 250x33cm Unfinished

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


Shell veneer Pommele SaRaiFo Quilted Wood brown 250x33cm

Item description

You will receive this item in the following dimensions per sheet:     

Length cm

Width cm approx.

Number of sheets

Thickness mm approx.

 

250

+/- 33

1

0.58


The width is 33cm without the light edge!

This brown one SaRaiFo* Shell maple - Pommele veneer (also called quilted maple or cloud maple) is a completely new SaRaiFo wood veneer creation with a shelled / clouded wood structure that looks very similar to a real Sapeli Pommele. The base color is reddish-brown with a beautiful cloudy grain-like arrangement of the wood structures. This veneer is made from countless fine real wood slats pressed/surface-glued (E1) using many different production processes and then processed into this flat wood veneer, cut and very irregularly loosened up by shiny and shimmering areas in the wood, giving the surface a very unique and special appearance. This shimmer has different effects - depending on how you look at this design veneer, the effect is different. If you look at it from an angle, it will be more visible! Please note that this very wild structure is not easy to produce - so unfortunately it happens with this veneer that very fine open areas appear every now and then. But with the fleece on the back, it is very well prepared and can still be processed very easily across the surface! Should be processed with some experience! e.g. the paint will fill it, or it could be repaired with putty.

These Pommele wood veneers have a light wooden edge on the edge - this only serves as a kind of edge protection and can also be cut away as normal. e.g. with a sharp cutter... The width is 33cm without the light edge!

These veneer sheets are only offered in raw cut form, The backs of the veneers are laminated/reinforced with a fleece. Easier processing, increased flexibility and reduced risk of breakage are just three of the advantages! Raw cutting/raw material This means that the sides/edges are not yet 100% precisely finished.  The veneer with fleece is simply processed like any other veneer (glued, ironed on, pressed, see processing tips below) and goes/stays on the underside or back; the veneer sheet is delivered without glue.


The veneers
 serve only as raw material/starting material for many different applications such as for DIY projects, hobbyists, jewelry, inlays, artists, furniture parts, and all kinds of craftsmen, designers or creative hands and still have to be processed and processed yourself! In general, you should always plan enough waste into your project and should never count on the maximum width and length specified here! The edges/sides may still be a little frayed, or a fine hairline crack may appear at the end from time to time. The dimensions are given with minimum and maximum values. The photos were taken from a 63cm sheet!


* SaRaiFo = Save the RainForest: If you process this veneer, you will help to relieve the pressure on tropical trees and thereby protect them. By purchasing SaRaiFo products you can do your own personal part! SaRaiFo wood veneers are made from peeled veneer from very fast-growing types of wood (usually Ajous, poplar, linden). The veneers are freed from wood defects and glued/compacted/pressed into a solid block in many different optimized production steps in order to then cut designer veneers made of real wood using a special process.

Advantages of these veneers:
- Relief for already endangered tropical tree species
- consistent optics always available in large quantities
- Back laminated/reinforced with fleece (easier to handle, cut, edit - is much more stable)
- natural wooden surfaces/decors
- large areas (instead of narrow strips) up to 64cm wide
- easier processing (no annoying joining)
- Time and cost savings in processing
- almost any wood design can be realized - contact us if you would like to implement new ideas
- NEW: now also partly available in solid wood (Density: approx. 750-950kg/m3)
   


Processing instructions:


 
Cutting veneers:
-All veneers are only rough cut = not precisely cut
 Please keep in mind that a sheet of veneer is not perfectly cut or does not always have perfectly straight edges. Veneers only serve as a starting material/raw material for countless creative works and wood projects and you should always allow for sufficient waste. For example, if a sheet is 30cm wide, you should allow for at least 0.5-1cm of overhang on each side.
-You can easily cut these veneers with a sharp cutter/scalpel/veneer knife 
  or cut carefully with scissors (smaller pieces).

Processing veneers with fleece: 
-With SaRaiFo veneers with fleece, the side with the fleece goes on the underside and remains on the veneer and is glued and pressed! All veneers are delivered without glue on the back! All our SaRaiFo Veneers can be processed with fleece like any other veneer.

-Carrier surface:
   You can actually apply all veneers to any substrate using the necessary adhesives!
  e.g. all kinds of boards such as MDF, chipboard,..., solid wood, boards, plastic, metal, glass, etc.) each with the necessary adhesives. 
- Adhesive/glue for wood veneers:
Any adhesive can be used: wood glue/white glue, Pattex, epoxy, bone glue, 2-component adhesives, etc. With wood glue/Ponal, for example, you can either press the veneer overnight with a plate and weight or screw clamps, or iron it on. 

With Pattex (is a contact adhesive) you can apply the veneer relatively quickly Apply pressure (e.g. with a rolling pin) - this will hold securely after just a short time!

- iron-on veneers - veneer with hot melt adhesive:
  you can easily make your own by simply Apply glue to the veneer and the support surface - let it dry for about 15-20 minutes (the glue will be nice and glassy) and then press the veneer on with the iron under pressure.
 
-Surface treatment of veneers: 
Depending on your taste, there are many possible/usual options on the market that you can use:
 Clear varnish (glossy, matt), oil, wax. Tip: to preserve the colors for longer, an oil/varnish with UV protection is recommended - but of course it doesn't have to be.
If you need further practical tips about veneer processing, click here
We present our veneer specialist book \"Veneers & Inlays\" to you (--> also available in the shop). We partly helped design this book and is very useful and helpful for both beginners and experts/carpenters/carpenters/artists!       

 
Shipment:              


All veneers are easily moldable and will be shipped rolled in a small box. 




Shell veneer Pommele SaRaiFo Quilted Wood brown 250x33cm

You will receive this item in the following dimensions per sheet:     

Length cm

Width cm approx.

Number of sheets

Thickness mm approx.

 

250

+/- 33

1

0.58


The width is 33cm without the light edge!

This brown one SaRaiFo* Shell maple - Pommele veneer (also called quilted maple or cloud maple) is a completely new SaRaiFo wood veneer creation with a shelled / clouded wood structure that looks very similar to a real Sapeli Pommele. The base color is reddish-brown with a beautiful cloudy grain-like arrangement of the wood structures. This veneer is made from countless fine real wood slats pressed/surface-glued (E1) using many different production processes and then processed into this flat wood veneer, cut and very irregularly loosened up by shiny and shimmering areas in the wood, giving the surface a very unique and special appearance. This shimmer has different effects - depending on how you look at this design veneer, the effect is different. If you look at it from an angle, it will be more visible! Please note that this very wild structure is not easy to produce - so unfortunately it happens with this veneer that very fine open areas appear every now and then. But with the fleece on the back, it is very well prepared and can still be processed very easily across the surface! Should be processed with some experience! e.g. the paint will fill it, or it could be repaired with putty.

These Pommele wood veneers have a light wooden edge on the edge - this only serves as a kind of edge protection and can also be cut away as normal. e.g. with a sharp cutter... The width is 33cm without the light edge!

These veneer sheets are only offered in raw cut form, The backs of the veneers are laminated/reinforced with a fleece. Easier processing, increased flexibility and reduced risk of breakage are just three of the advantages! Raw cutting/raw material This means that the sides/edges are not yet 100% precisely finished.  The veneer with fleece is simply processed like any other veneer (glued, ironed on, pressed, see processing tips below) and goes/stays on the underside or back; the veneer sheet is delivered without glue.


The veneers
 serve only as raw material/starting material for many different applications such as for DIY projects, hobbyists, jewelry, inlays, artists, furniture parts, and all kinds of craftsmen, designers or creative hands and still have to be processed and processed yourself! In general, you should always plan enough waste into your project and should never count on the maximum width and length specified here! The edges/sides may still be a little frayed, or a fine hairline crack may appear at the end from time to time. The dimensions are given with minimum and maximum values. The photos were taken from a 63cm sheet!


* SaRaiFo = Save the RainForest: If you process this veneer, you will help to relieve the pressure on tropical trees and thereby protect them. By purchasing SaRaiFo products you can do your own personal part! SaRaiFo wood veneers are made from peeled veneer from very fast-growing types of wood (usually Ajous, poplar, linden). The veneers are freed from wood defects and glued/compacted/pressed into a solid block in many different optimized production steps in order to then cut designer veneers made of real wood using a special process.

Advantages of these veneers:
- Relief for already endangered tropical tree species
- consistent optics always available in large quantities
- Back laminated/reinforced with fleece (easier to handle, cut, edit - is much more stable)
- natural wooden surfaces/decors
- large areas (instead of narrow strips) up to 64cm wide
- easier processing (no annoying joining)
- Time and cost savings in processing
- almost any wood design can be realized - contact us if you would like to implement new ideas
- NEW: now also partly available in solid wood (Density: approx. 750-950kg/m3)
   


Processing instructions:


 
Cutting veneers:
-All veneers are only rough cut = not precisely cut
 Please keep in mind that a sheet of veneer is not perfectly cut or does not always have perfectly straight edges. Veneers only serve as a starting material/raw material for countless creative works and wood projects and you should always allow for sufficient waste. For example, if a sheet is 30cm wide, you should allow for at least 0.5-1cm of overhang on each side.
-You can easily cut these veneers with a sharp cutter/scalpel/veneer knife 
  or cut carefully with scissors (smaller pieces).

Processing veneers with fleece: 
-With SaRaiFo veneers with fleece, the side with the fleece goes on the underside and remains on the veneer and is glued and pressed! All veneers are delivered without glue on the back! All our SaRaiFo Veneers can be processed with fleece like any other veneer.

-Carrier surface:
   You can actually apply all veneers to any substrate using the necessary adhesives!
  e.g. all kinds of boards such as MDF, chipboard,..., solid wood, boards, plastic, metal, glass, etc.) each with the necessary adhesives. 
- Adhesive/glue for wood veneers:
Any adhesive can be used: wood glue/white glue, Pattex, epoxy, bone glue, 2-component adhesives, etc. With wood glue/Ponal, for example, you can either press the veneer overnight with a plate and weight or screw clamps, or iron it on. 

With Pattex (is a contact adhesive) you can apply the veneer relatively quickly Apply pressure (e.g. with a rolling pin) - this will hold securely after just a short time!

- iron-on veneers - veneer with hot melt adhesive:
  you can easily make your own by simply Apply glue to the veneer and the support surface - let it dry for about 15-20 minutes (the glue will be nice and glassy) and then press the veneer on with the iron under pressure.
 
-Surface treatment of veneers: 
Depending on your taste, there are many possible/usual options on the market that you can use:
 Clear varnish (glossy, matt), oil, wax. Tip: to preserve the colors for longer, an oil/varnish with UV protection is recommended - but of course it doesn't have to be.
If you need further practical tips about veneer processing, click here
We present our veneer specialist book \"Veneers & Inlays\" to you (--> also available in the shop). We partly helped design this book and is very useful and helpful for both beginners and experts/carpenters/carpenters/artists!       

 
Shipment:              


All veneers are easily moldable and will be shipped rolled in a small box. 




Receive offers conveniently via email
This brown one SaRaiFo* Shell maple - Pommele veneer (also called quilted maple or cloud maple) is a completely new SaRaiFo wood veneer creation with a shelled / clouded wood structure that looks very similar to a real Sapeli Pommele. The base color is reddish-brown with a beautiful cloudy grain-like arrangement of the wood structures. This veneer is made from countless fine real wood slats pressed/surface-glued (E1) using many different production processes and then processed into this flat wood veneer, cut and very irregularly loosened up by shiny and shimmering areas in the wood, giving the surface a very unique and special appearance. This shimmer has different effects - depending on how you look at this design veneer, the effect is different. If you look at it from an angle, it will b