Product overview
Siemens 6EP3332-6SB00-0AY0 is a LOGO!POWER DIN‑rail switched‑mode power supply that delivers 24 V DC at 2.5 A (60 W) from a wide AC/DC input (100–240 V AC / 110–300 V DC). It’s intended for small automation and LOGO! applications where a compact, stabilized 24 V source is required.
Key electrical specifications
| Parameter |
Value |
| Input voltage (AC) |
100 … 240 V AC |
| Input voltage range (AC) |
85 … 264 V AC |
| Input voltage (DC) |
110 … 300 V DC |
| Output voltage |
24 V DC |
| Output current |
2.5 A |
| Output power |
60 W |
| Efficiency (typ.) |
~90% |
| Hold‑up / buffering time |
≥ 40 ms (at Vin = 187 V, Iout rated) |
Full input/output values and efficiency are documented in the Siemens data sheet.
Protections and electrical behavior
- Inrush current limiting: max ~52 A at +25 °C; I²t max 3 A²·s.
- Overvoltage resistance: withstands 300 V AC for 1 s.
- Built‑in incoming fuse: internal.
- Recommended upstream protection: miniature circuit breaker from 10 A characteristic B or from 6 A characteristic C.
These protection and start‑up characteristics are listed in the technical data.
Mechanical and environmental
- Mounting: DIN‑rail (EN 60715)
- Dimensions (approx.): 54 × 53 × 90 mm (W × D × H)
- Operating temperature range: typically down to −25 °C (check datasheet for upper limit and derating)
- Mains buffering / hold‑up: specified at rated conditions.
Refer to the Siemens product pages and distributor datasheets for exact mechanical drawings and full environmental limits.
Certifications, documentation, and ordering
- Product family name: LOGO!POWER 24 V / 2.5 A.
- Documentation available: Siemens data sheet, manual/operating instructions, certificates and product note on Siemens support site.
- Typical part use: powering LOGO! controllers and small control panels.
Downloadable datasheet and certificates are available from Siemens support and major distributors.