eBay

Product Description

Romondes BT200 is a classic battery tester and is dedicatedly developed for both beginners and mechanics. It detects all automotive 12V lead-acid batteries with a capacity of 100 to 2000 CCA, including regular flooded, AGM flat plate, AGM spiral, GEL batteries, and EFB battery for multi gasoline or diesel types Vehicles,including car, truck, motorcycle, ATV, SUV, Boat, Yacht. Whether you are a professional mechanic or beginner, you can use this tester to detect a car battery to find problems and fix problems.Thanks to BT200’s powerful chip, This battery tester provides a quick, easy and accurate test results in only 3 seconds for you to view battery charging status, check the battery health status and detect faults.

BT200 Battery Load Tester K~y Features:

1. Strong Capacity: Works on 12V batteries, battery ratings from 100 - 2200 CCA, also starter and Charging;

2. Test Multiple Battery Types: Regular flooded, AGM flat plate, AGM spiral, Gel and EFB;

3. Test Standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN and SAE;

4. Test result: SOH, SOC, CCA value, voltage, internal resistance, etc;

5. Support both in-vehicle and out-of-vehicle test, no need to remove the battery;

6. Provide reliable results within seconds, display suggestion according to the testing results (Good, Recharge, Replace), detects bad cells directly;

7. Polarity reverses connection protection;

8. Support 8 languages: English, Russian, French, Spanish, German, Italian, Portuguese, Dutch;

9.Suitable for automobile factory, garage, auto battery manufacturer, and DIY enthusiasts, etc.

How to test your Battery ?

Cranking Test

Enter cranking test and start the engine as prompted. The tester will display cranking voltage and the cranking time to check the starting motor works properly or not.If the cranking voltage value is lower than 9.6V, the cranking system is defective that shall be replaced. Opposites, the cranking system will be nice if the voltage value higher than 10.2V.

Charging Test

The tester displays the results of the ripple test,loaded and unloaded with reliable data to let you know battery status.

How to Test Your Battery ?

Choose Battery Test Mode - Select Battery Type - Select Battery Model - Get the Testing Result.Test Result including Voltage,system standards,SOH (State of Health), SOC (State of Charge), Resistance.

Battery Test Results:

GOOD BATTERY: The battery is in good condition.

GOOD-RECHARGE: The battery is in good condition but low current. Fully charge the battery and return it to service.

CHARGE & RETEST: Fully charge the battery and retest. When completed charging, please wait for half an hour to test.Failure to fully charge the battery before testing may result in inaccurate results. If you still get the message after you fully charge the battery, replace it.

REPLACE BATTERY: The battery is almost dead or the connection between the battery and the battery cable is poor. Replace the battery and retest; or disconnect the battery cables and retest the battery using the out-of-vehicle test before replacing it.

BAD CELL-REPLACE: The battery may be damaged such as a broken cell or short circuit. Replace the battery and retest.


What causes low cranking voltage? A starter that's failing may crank the engine too slowly for a quick start, or it may not crank the engine at all. Often, the problem is not the starter but a low battery or a loose or corroded battery cable connection.If the battery's voltage is low and it doesn't take a charge, your customer needs a new battery.	Charging Test After the cranking test completed, DO NOT switch off the ignition and press the “OK” K~y to test the charging system. This battery tester will take a few seconds to run the ripple test, loaded volt test, and charging volt test in a sequence. The reliable results include charging volt, ripple test, and charging test for your reference.	Battery type range This battery analyzer works on all automotive 12V lead-acid batteries, such as regular flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries for vehicles, SUV, motorcycle, light truck, boat. Whether you are a professional mechanic or car owner, you can use this tester to detect a car battery and find problems and fix problem.


What Kind of Vehicle Models Can It Test? BT200 battery load analyzer can detect all automotive 12V lead-acid batteries, such as regular flooded, AGM flat plate, AGM spiral, and GEL batteries of cars, SUVs, light trucks, motorcycles, and more. It gives you accurate test results in only 3 seconds based on CCA, CA, MCA, JIS, DIN, IEC, EN, and SAE rating standards.	Fast and Accurate Test Result Thanks to BT200’s powerful STM-32 chip, it does not only provide more than 99.5% precise testing reports,but also quickly analyzes the data that usually taking 2-3 seconds to display the results.Easy to use and greatly improved the testing speed compared to other battery testers.	Is Support Multiple Languages ? This automotive scanner and the diagnostic tool includes many lanuages like English Spanish Germany Frence Russian Dutch Portuguese Italian, which meets the requirement of some customers asking for spanish. Then you don't need to use google translation again.	Don't Worry About the Safety It's designed with polarity reverses connection protection, and it does not emit light, heat, spark, and discharge to safeguard all users, the vehicle, the battery, and the device itself. Please note: connect the red clamp to the positive(+) terminal and the black clamp to the negative(-) terminal.

Product Description

BT200 Battery Load Tester K~y Features:

How to test your Battery ?

What causes low cranking voltage?

Charging Test

Battery type range

What Kind of Vehicle Models Can It Test?

Fast and Accurate Test Result

Is Support Multiple Languages ?

Don't Worry About the Safety