Welcome to my store

This item will be shipped from Germany by DHL or UPS to European Union Customers.

Attention：

All goods price include 19% VAT.I will make invoice for every order.

If you have VAT number,don't forget give me your VAT number and company name after payment.

If you don’t have VAT number,you buy it directly,I will make invoice by your ebay address.


This item includes:
1 pcs Nema 23 stepper motor 270 oz.in=1.9N.M, 4 leads, 6.35mm shaft diameter 23HS8430
 1 pc Stepper Motor Driver TB6560  （  3Axis Driver Board    ）   
 1 pc Power Supply 350W 24V
 1PC  3Axis Driver Board Cable



Features:
1.High torque, More smooth movement
2.High efficiency, energy-saving, low noise, low vibration, high start torque, low start current and reliable performance.
3.If you want manaul,you tell me your e-mail,I send electronic manual to you by e-mail.
1.Stepper motor Nema 23
Detailed information

Einzelheiten/ Details: 23HS8430( =57BYGH627 )

 

Schrittwinkel

Step Angle

1,8°± 5% ° /STEP

Spannung

Rated Voltage

3,0 V

Nennstrom

Rated Current

3,0 A /Phase

Widerstand pro Phase

Phase Resistance

1,0 ± 10%   ohm/Phase

Induktanz pro Phase

Phase inductance

3,50 ± 20%   mH/Phase

Drehmoment

Holding Torque

190 N.cm Min

Rastmoment

Detent Torque

6.0 N.cm Max

Drehmoment

Rotor Torque

480 g- cm²

Anzahl der Drahtleitungen

Number of Wires

4

Wellendurchmesser

Shaft Diameter

6,35mm ± 0,012mm

Motorlänge

Motor Length

76 mm

Gewicht

Motor Weight

1,05   kg

Leitungsverbindung

Wires Connection

EN: Black A+ ,Green A- , Red B+ ,   Blue B-

DE: Schwarz A + ,Grün A- , Rot B +, Blau B-


Einzelheiten/ Details：3Axis Driver Board


 

Input Voltage/ Eingangsspannung


DC: 12-36 VDC

Microstep Setting/ Unterteilungsbereich

200-51200ppr(16 Microsteps)

Output Current/ Ausgangsstrom

3.5A

Input Pulse Frequency/ Impulsantwort Frequenz

0-200 kHz (.)

Signal Current


Storage Environment

-20 ℃ - +65 ℃

Humidity

Not condensation, no water droplets

Weight


Using Environment

0 ℃– 50 ℃, avoid dust and corrosive gas


   
Product Features:
 High power, maximum 3.5A drive current chipset !
 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!
 Adjustable drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different
stepper motors
 Overload, over-current and over-temperature safety - Full protection for your computer and peripheral
equipment !
 On board current switching - Power output can be set according to specific user requirement !
 Full closed-type optical isolation to protect the user's computer and equipment
 Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be
powered by this output!)
 4 channel inputs interface- Can be used for XYZ limit and emergency stop !
 Professional design - Two stage signal processing with super anti-jamming !
 Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range
without creep effect !
 Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop !
 Universal architecture - Supports most parallel software MACH3,KCAM4,EMC2 etc!

 Power supply DC 12-36V (not included)
*Voltage Selection:
12-16V DC power supply for Nema 17 stepper motors
16-24V DC power supply for Nema 23 stepper motors
24-36V DC power supply for Nema 34 stepper motors
(High voltage will burn up the chips or stepper motors!!!)
*Ampertage Selection:
Output current of the power supply can be calculated by the following expressions:
Output current = Rated current of your stepper motors * quantity + 2A
(For example, if you want to drive 3 * 3A Nema 23 stepper motors, theoretically 24V 11A DC power
supply is recommended, but higher power such as 24V 15A also will be good.
If you are not sure about the selection of power supply, please feel free to contact us for help)
 The power output of 12V shall be applied to the radiator fan of 12V
 Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.
 Suitable for unipolar or bipolar stepper motors.
 Voltage regulated spindle speed controlled by parallel interface as function of supply voltage.

Einzelheiten/ Details: S-350W-24V 

Detailed information

Spannung

DC Voltage

24V

Spannungstoleranz

Voltage Tolerance

+/-1%

Nennstrom

 Rated Current

14,60A

Strombereich

Current Range

0-14,6A

Spannungsspannung

Ripple &Noise

(Max): 150mVp-p

Line Regulation

Line Regulation

+/- 0,5%

Load Regulation

Load Regulation

+/- 0,5%

Nennleistung

Rated Power

350 W

Nennleistung

Rated Powe

83%

Wechselstrom

AC Current

4,5A/115VAC  2,5A/230VAC

Anlaufzeit

Setup Rise, Hold Time

200ms, 100ms, 20ms

Vibration

Vibration

0-500Hz, 2G 10min/11 Zyklus, 60min, je Achse

Stehspannung I/P-O/P

Withstand Voltage I/P-O/P

3KVACI/P-FG: 1.5KVACI/P-FG:0.5KVAC

Isolationswiderstand

Isolated Resitor

I/P-O/P, I/P-FG:500VDC/100M W

Arbeitstemperatur / Feuchtigkeit

Working Temp. Humidity

-20°C - +85°C, 10%-95%RH

Abmessung

Dimension

215mmx115mmx50mm

Gewicht

Weight

0,9kg

Sicherheitsstandart

Saftey Standart

UL1950

EMC

EMC

FCCpart1.5J class A





Additional instructions：

1.About VAT invoice:Usually I will make invoice every Friday,then I will send invoice to your ebay e-mail.

 If you don’t receive invoice,you contact me by ebay message.

2.Delivery time:All products are available and can be shipped out right after payment.

I only make ship on work day（Except Saturday、Sunday and Holiday）.

- Shipping via DHL or GLS.

After delivery,for Germany,about 2~3 work days.

After delivery,for EU country,usually about 5~7 work days, if you not receive goods at the Eighth work day,you search the tracking on DHL or GLS website.If the tracking has problem,you make a call to your local DHL or GLS,then contact me .

3.Service: If you need more pictures, descriptions, manual, please contact me.

If you have problem,when you connect it,you contact me,I will help you.

Application:Our Stepper Motors are used on small to mid-sized CNC mills or milling machines, CNC lathes, Pick-n-place machines,Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters. Carver machine ,Dispenser,Automazation,3D Printer,Stage lighting,instrument,laser equipment,scanner Dispenser,Logistics equipment,and so on.These motors have been used in precision telescope positioning systems and robots.