JetKVM-Efficient remote management of computers

JetKVM is a highly efficient open-source IP KVM switch. It provides a remote control solution for target computers using just one set of peripherals (keyboard,mouse,monitor). Efficiently remote management of computers, servers, and workstations,such as operating systems, or adjusting BIOS settings.

Local Access

To access the JetKVM web UI, you'll need the device's IP address, which is displayed on the front screen of the JetKVM device along with the MAC address. Simply refer to this screen, note the IP address, and use it to navigate to the web UI in your browser.

Remote Access

Remote Access allows you to connect to your JetKVM device from anywhere on the internet. Through our cloud dashboard, you can log in, get an overview and control any of your cloud-enabled devices. This means you can access and manage your JetKVM devices from your phone or computer, anywhere in the world with an internet connection.

Wake on Lan

Wake on LAN is a standard feature that allows a computer to be powered on or awakened from sleep mode by receiving a network message, known as a "magic packet." This message is sent from one device to another on the local area network (LAN).

Please note, the target computer must be configured to listen for incoming magic packets to be awakened.

ATX Power Extension

A control board that manages computer power states through the JetKVM's RJ-12 extension port. Connect to your motherboard's front panel headers to gain remote power control over your PC.

Each pin features dual headers: one set for KVM control and another for the original front panel buttons -- meaning you don't have to choose between them. Both can be connected simultaneously.

Comes with a PCIe slot cover bracket for clean cable routing through your PC case without requiring an actual PCIe slot.

Remote Power Control for any DC device

Add remote power cycling to your JetKVM setup. Plug into the RJ-12 port, route your device's DC power through the module, and control power directly from the browser with the JetKVM.

It supports DC input ranging from 12 to 20 volts, and we're including adapters to support 5.5x2.1 mm connections as well.

The extension can also power the JetKVM itself through the RJ-12 connection, streamlining setup and reducing the need for additional power sources.

Serial Console Extension for JetKVM

Extend your JetKVM capabilities with serial console access. This extension provides both RS-232 and RJ-12 connectivity options, allowing you to access serial consoles directly from your browser through the JetKVM interface.

Connect to devices with either RS-232 serial ports commonly found on network equipment, servers, and embedded systems.

The extension integrates seamlessly with your JetKVM setup, providing reliable serial communication for configuration, troubleshooting, and remote management tasks.